You can change the rotational direction of a brushless motor by swapping any two of the three wires on the brushless motor. My guess is it was wired wrong in the factory either at the switch, esc, or at the motor solder points. Might be a cool video for you to open the drill up and fix it.
I have ordered a few things from Temu and the only thing I would say is to read the description for the sizes. Some of the things I bought were way too small to be what they said they were. Other then that really have had no issues with Temu.
U will get what u pay for...mostly not bad for the money on certain tools.. flashlight batteries dont last too long ..but they definitely have some usefull stuff..
I've purchased #2 phillips bits, bit holders, pliers, wire cutters, tool bags. Drill bits and various other items. I've had great luck with everything so far with the exception of one of the drill bits that broke on the first try and an angle grinder socket wrench pressure plate remover. It was too small.
Good to hear i had issues witht he blue impact it was wired backwards so i tore it apart and rewired it. works like its should now still need to do a follow up video of them in action just been so busy
Chuck - look for some 18gauage and 16gauge brad nailers that use Dewalt batteries from TEMU. If they cost less than Ryobi I'd like to see em. THNX & great vidz!!
only see 18 gauge and they take makita batteries www.temu.com/1-set-18-gauge-cordless-rechargeable-air-impact-nail-gun-and-staple-gun-stright-nail-u-nail-to-match-18v-makita-battery-body-only-g-601099532867784.html?top_gallery_url=https%3A%2F%2Fimg.kwcdn.com%2Fproduct%2FFancyalgo%2FVirtualModelMatting%2F6028d755db3b1d896b1159f7ec415e6a.jpg&spec_gallery_id=2053036536&refer_page_sn=10009&refer_source=0&freesia_scene=2&_oak_freesia_scene=2&_oak_rec_ext_1=MTMxMDM&search_key=framing%20nailer%20cordless&refer_page_el_sn=200049&_x_ads_csite=pc_bottom&_x_ads_channel=kol_affiliate&_x_cid=kol_affiliate&_x_vst_scene=adg&_x_campaign=affiliate&_x_sessn_id=bimvzqs9uo&refer_page_name=search_result&refer_page_id=10009_1707354006818_3iezoft9fq
The angle grinder sounds like it was about to fall apart. Did the Temu contract say you had to say good things about the products. We need to see some testing against better tools.
no contracts lol i dont work that way. As you see the blue impact didn't work properly out of the box quality issue of course was an easy fix though but still something that shouldn't of happened
Hand tool clones are killer got some wera clones that are out of this world for 15 bucks, 10 of them. Speciality tools too got a 35$ cordless heat gun that accepts M18 batteries. Badass deal. But yeah don't write it off, half the name brand shit you buy is manufactured in the same Chinese factories lol
@kowiz920 Ryobi, milwaukee, makita, kobalt. not really a fan boy of any company what ever works for what I need it for at an affordable price. Very rarely do I buy tools at Full price. Usually wait till I find a deal.. I'm just a diyer so not pressed to have the best. my money maker is my full time job (work for UPS as a driver)
I still haven't bought from them. They are too greedy when it comes to your information. The Chinese government owns a chunk of them too. I'll stick to Aliexpress and Amazon for now
understandable... I'm a UPS driver and lately I deliver so many temu packages.. everyone Ive asked if they are happy with temu products and every person so far said yes ....kinda surprised me
Want to try out Temu Download Temu App to get $100 Coupon Bundle FOR FREE!!!temu.to/m/uyukl2l6sef
⚡Or search my code【dky2238】on Temu App to claim
You can change the rotational direction of a brushless motor by swapping any two of the three wires on the brushless motor. My guess is it was wired wrong in the factory either at the switch, esc, or at the motor solder points.
Might be a cool video for you to open the drill up and fix it.
OPEN IT UP
I was thinking the same thing
Might as well
Well you motivated me I took it apart had to swap the white and blue wire coming off of the motor works like it should now!
@Soggy-Soy-Toy took your advice opened it up swapped the white and blue wire coming from motor works like it should now!
I have ordered a few things from Temu and the only thing I would say is to read the description for the sizes. Some of the things I bought were way too small to be what they said they were. Other then that really have had no issues with Temu.
U will get what u pay for...mostly not bad for the money on certain tools.. flashlight batteries dont last too long ..but they definitely have some usefull stuff..
I've purchased #2 phillips bits, bit holders, pliers, wire cutters, tool bags. Drill bits and various other items. I've had great luck with everything so far with the exception of one of the drill bits that broke on the first try and an angle grinder socket wrench pressure plate remover. It was too small.
Good to hear i had issues witht he blue impact it was wired backwards so i tore it apart and rewired it. works like its should now still need to do a follow up video of them in action just been so busy
Yes I got some things from temu .I got the impact bits, the handwelder, hardware also everything works good prices are great.
@@moseshancock3336 how's the hand welder
@AllThingsCool it works good for the product.
I think there’s no reason for the grinder to have speed modes because the only mode you need is full power
How much is the Makita battery.
Maybe a not good deal😢
You should compare that drill charger and battery to DeWalt. It might be a DeWalt clone. Very interesting 🤔
good idea
Chuck - look for some 18gauage and 16gauge brad nailers that use Dewalt batteries from TEMU. If they cost less than Ryobi I'd like to see em. THNX & great vidz!!
I'll look into it
only see 18 gauge and they take makita batteries
www.temu.com/1-set-18-gauge-cordless-rechargeable-air-impact-nail-gun-and-staple-gun-stright-nail-u-nail-to-match-18v-makita-battery-body-only-g-601099532867784.html?top_gallery_url=https%3A%2F%2Fimg.kwcdn.com%2Fproduct%2FFancyalgo%2FVirtualModelMatting%2F6028d755db3b1d896b1159f7ec415e6a.jpg&spec_gallery_id=2053036536&refer_page_sn=10009&refer_source=0&freesia_scene=2&_oak_freesia_scene=2&_oak_rec_ext_1=MTMxMDM&search_key=framing%20nailer%20cordless&refer_page_el_sn=200049&_x_ads_csite=pc_bottom&_x_ads_channel=kol_affiliate&_x_cid=kol_affiliate&_x_vst_scene=adg&_x_campaign=affiliate&_x_sessn_id=bimvzqs9uo&refer_page_name=search_result&refer_page_id=10009_1707354006818_3iezoft9fq
The angle grinder sounds like it was about to fall apart. Did the Temu contract say you had to say good things about the products. We need to see some testing against better tools.
no contracts lol i dont work that way. As you see the blue impact didn't work properly out of the box quality issue of course was an easy fix though but still something that shouldn't of happened
@@AllThingsCoolYou need to test them to know if they are good or bad
Hand tool clones are killer got some wera clones that are out of this world for 15 bucks, 10 of them. Speciality tools too got a 35$ cordless heat gun that accepts M18 batteries. Badass deal. But yeah don't write it off, half the name brand shit you buy is manufactured in the same Chinese factories lol
That sure looks like Dewalt
Oh yea 🤣
@@AllThingsCool I wonder what is under the dewalt sticker 🤔
@nelsoninman3678 oh boy now your stirring up some curiosity
I can’t trust you when you have Ryobi in the background you probably work in your house and it’s about it
@kowiz920 Ryobi, milwaukee, makita, kobalt. not really a fan boy of any company what ever works for what I need it for at an affordable price. Very rarely do I buy tools at Full price. Usually wait till I find a deal.. I'm just a diyer so not pressed to have the best. my money maker is my full time job (work for UPS as a driver)
I still haven't bought from them. They are too greedy when it comes to your information. The Chinese government owns a chunk of them too. I'll stick to Aliexpress and Amazon for now
understandable... I'm a UPS driver and lately I deliver so many temu packages.. everyone Ive asked if they are happy with temu products and every person so far said yes ....kinda surprised me
Hey Chuck
hey bud
@@AllThingsCool how are you
@@jeremynguyen2346 good 👍
@@AllThingsCool good 👍