i know Im randomly asking but does any of you know a tool to log back into an instagram account? I stupidly lost my account password. I appreciate any help you can offer me.
@Malcolm Casey Thanks for your reply. I found the site through google and im in the hacking process atm. I see it takes a while so I will get back to you later with my results.
Have watched countless videos over at PFI trying to get a better grasp on tuning. In one video you’ve cleared up so many questions I’ve had. Greatly appreciate your transparency in your work 🙏
2:20 lol i know what that means!! i live where snow is a big deal. thats why i own a subaru and an evo x too, but my fully built k24/k20 civic si 8th is a gem on summer only !!
I think the cold weather is what really made the extra power. IMO maybe like 3 hp could be the kpro but the bulk is weather. I'm not a tuner so.... I know kpro is a better tuning tool than ktuner but it works. Ktuner was half the price and half the effort than kpro for me to get. I'm sure ktuner will get better in time. Thanks for the videos bro. Stay safe
Tuning by Nick I’m the guy who’s been emailing you about the button pop and crackle so you know what videos I want buddy! Keep up the good work, one of the most informative tuning videos on UA-cam, great to watch and learn.
@@tuningbynick my first setup was stock rbc stock throttle body stock injectors stock fuel pump header ktuned 2.5 and skunk2 cat back 3" with a short ram intake afdynamic 2.5 with base map y made 229hp after dyno tune the car was on 238 hp after that i put the throttle body j37 and the long air intake 3.5 ktuned give me 250hp and still stock injectors and fuel pump i still have room to grow and i think i can go to 260 hp on porting the rbc thermal gasket and 4" intake by the headlight plus injectors and fuel pump everything on 93 fuel
Hi, I have the same set up in my 93 eg K24a2 08/ Ep3 trans.. Rbc - types tb - PLM header - 2.5 exhaust. Stock internals 25 vtc. Injectors on 93 octane. Could if possible you send me this tuned file 🤔. I've not saved enough $$ to get around on a full tune with 50vtc.
Hey Nick, how safe do you think the basemap for a k24a2 is for circuit racing? My car is a 05 k24a2 swap integra (stock long block, injectors, intake manifold) with a ktuned budget header and 2.5 in straight through exhaust?
I really dont think the basemaps are good enough for circuit use. Nothing is as hard on an engine as circuit use - 100% i would recommend a proper dyno tune before circuit racing.
Hello I have a 2005 Rsx. I’m gonna install a k24a but first I need to find a kpro with the harness that fits with 2005 ( same like yours) where I can get one, thank you
Very inofrmative video! Can you pls explain more on the VTC window. On how to properly tune it.. and how will you know if you need to add more degree or not.
Great video as always. I've been messing around with kpro v4 for a little bit on my ep3 with the k20a3. Your vids are a great help in understanding the software. I want to get familiar with everything before swapping in my k24. If I send you my calibration for the k20a3, would you be able to refine it and maybe setup a crackle tune also,for fun?
I know you don't have this car anymore Nick but, when you eventually went boost did you install a different external wideband like an AEM one? Or is the 02-04 wideband good enough for boosted application (I heard its wideband)?
I have a question. Some on the videos said . Need to turn off the wide band if u have stock o2 sensor or it will blow up the motor .. 😅 thats kinda scary me . Anyone could help ?
Im not exactly sure what youre question is - But if you are using a Kpro V4 there you can make either type of speed sensor work and your speedo will read correctly. You might just need to change some wiring - Check out the VTEC Academy Channel - they just did a video on how to wire it up
Question,I've got a 76mm throttle body and only the opening of my RBC is port matched. How much of a difference will it make to get the manifold fully ported? (Cut open, porting the runners)
Port work like that is super hit or miss - If its not done really well, you can actually loose power by unbalancing the flow of the runners. Its also usually expensive to do. Id maybe consider Drag Cartel DIC cams first, you'll get a lot more power that way - Check out my EP3 Drag cartel cam video if you havent already
That is one of the videos i am going to do in the fall. Ive tuned many K24A2's with 50* and it really depends on the mods. A lot dont need the 50* wheel
Thanks for this video! It looks really scary messing with all those numbers! Quick question if you don't mind: I just have an intake & exhaust and plan to get K Pro soon, will I be fine just using one of their base maps without messing with any of the other configurations? Or would you recommend I get it tuned after K Pro is installed by a tuner? I'm new to K Pro and tuning! Thanks for the time and video!
Echizen32k Media you can get by by using the base maps on the kpro theirs maps specifically for basic bolt ons , but base maps are usually not to accurate depending on set up wise but you shud be fine
Agreed - the kpro base maps are a great starting point and you can usually drive around on them with no issue. However doing so really sells your setup sort, this video is a perfect example, nearly 30 hp difference between the basemap and final tune
Do you have any map for a stock k20a2 with rbc mani and rdx injectors 1320 headers? Need one to drive it to the shop any help please appreciated me f u can help
Mr360allday - best thing you can do is just use your original tune and chance the injector size to 440. That should be plenty good so you can get it to the shoo
So you need the 02-04 o2 sensor for kpro if it’s a 05-06, correct? how about the fuel ratio sensor, doesn’t matter if it’s an 05-06? or does it have to be 02-04 as well?
Im working on my tune and about the part where you copy all the maps, which map to you recommend copying them from? Im only street tuning with no dyno in my area.
The best way to do it would copy the the corresponding section of the maps that line up with the VTC settings. Problem with that is there usually requires a lot of smoothing Usually the safest option is to use to use the zero VTC maps. But there are so many basemaps out there that is not always the case. Best rule of thumb is use the least aggressive map as your starting point
Do you happen to know what k24 would be easiest to swap into a 2003 rsx type s? I have a hondata Ecu with kpro that was in the car when I got it and the stock k20 with about 185k miles. Just looking for options as I get into the higher miles.
Hey Nick, I just started watching your videos. They're very informative and I'm truly enjoying them. Keep up the good work! I have a '04 RSX Type S and I installed a K24A2 from a '04 TSX. It has Skunk2 Stage 1 cams, 50 deg VTC, DC Sports race header, Yonaka 2.5" exhaust, RBC intake, stock RSX throttle body and an AEM V2 intake. This is all managed by a KPro2. Unfortunately, I'm only running on a base map. I'd definitely be interested in having you possibly tune my car (when this covid business is over). I was debating on upsizing to a 70mm throttle body (from stock) and switching to a Hybrid Racing cold air intake (from an AEM V2 intake). What are your thoughts? Do you think I'd realize decent gains (after a proper tune of course)? Thank you. Andy
Quick question im going k24a soon on my 06 rsx type S will my skunk2 header fit I've ask a few people some say it does some says it don't, and what motor mounts are u using for the k24? is there anything I need before going k24a? Beside crv post mount? Sorry for all the questions lol
My header hit the sway bar so i just removed the sway bar - I never tracked the car, but i realistically felt no difference on the street - You'll want to swap over thermostat housing and thermostat from your K20 to the K24 and the K24 crank position sensor has a different pinout then your K20 - But thats about it - the K20A.org forum is a wealth of information on this stuff
Hey Nick, I just installed the modified 02-04 rsx kpro that’s designed for the 05-06 as I have the stock k20z1 in my 05 type-s. I was curious if I would have to swap my kpro out for an 02-04 normal kpro once I put in my k24/20 build? Is the 05-06 kpro what you are currently running just with a different calibration/map?
You wont have to change the kpro for your new engine - the thing to keep in mind with ECU's is you usually just have to match them to the specific year or model of your car because the wiring pinouts is what usually changes from year to year but the engines will stay the same - That is why the 05-06 Kpro has a jumper harness
Hi nick what’s you catalytic converter setup? My catalytic is probably getting to hot and leaks, and breaks. Do you use the k24 header or rsx header? I have k24/k20
If i have a converted kpro for my 0506, can i use my friends tune from his 02 rsx? exact same setup, injectors and all. I have the 0204 primary sensor as well
You can definitely give it a try - You'll need to change the speed sensor settings - But, even if there are similar builds no 2 setups run exactly the same. Im sure it will still need some tuning
@@tuningbynick thanks. Btw i have friend in calgary who wants to swap his 05 civic SIR facelifted model with a k24. I have a few questions. 1. Is the jdm k24a 3 lobes the same as the 06-08 acura tsx k24a2? If not which on is better and easier to swap in the ep3 2. Is it worth it to get the kpro ( 699 usd) vs ktuner ecu (450 usd) for this build? It will be a mild all motor build only. 3. Do you offer etune service?
@@tuningbynick thank you. Is the jdm k24a 3 lobes the same as the acura tsx k24a2 06-08? He is still shopping for an engine. Whats your suggestion for a k24 build ep3?
It really more depends on the power level the engine is making - The stock B series injectors are small. They are usually at max duty cycle at just a bit over 200WHP
Nice.. I have a question for you.. I have a 05 rsx s with k24 bottom end and I notice they sell an 02 sensor thats required for k tuner.. What is that primary 02 sensor for and do I really need it? Thanks
Bruh, you can't just tune a car to have 500 hp without all kinds of changes. It only has 150 hp to start with. How are you gonna jump from 150 to 500 without almost changing the entire engine out.
Final run was 25° for the whole rpm range, its still a stock gear, so 25° is the max. I will be swapping in a RBC 50° wheel and yes you can run yup to 40°
4 роки тому
I have a custom 40* VTC.. works like a charm.. Had some nightmare scenarios with the 50 on a stock K24.. I feel much more comfortable with a physical limiter over a 50* with an electronic limiter that cannot account for all circumstances.
Its one of those universal stick on lips you can get on amazon/eBay
4 роки тому
Seems your peak torque is coming in really late compared to alot of k24's I see(past 6K).. Most see max torque by about 4600-5000rpm.. And in doing so, they seem to get better torque numbers as well. Most people I see get 185-195tq on a k24 with full bolt ons.. When is Vtec engagement?
How much HP are they making tho? If they are making that much TQ down low they would be making 250+ Wheel HP - That is realistically not accurate for an internally stock TSX engine. Its possible that other dyno has a higher correction factor setting which adds free HP - Mine is set at Zero. No free HP here on my dyno
4 роки тому
@@tuningbynick .. They are usually making similar numbers(I made 233whp, 193tq) The torque starts to fall off earlier, but the HP still climbs up to 7500.. And unless you are running a k20 head or a 50 degree VTC you dont need power climbing past 7500 really. And for the street especially, having max torque so early is really nice rather than having to rev out the motor. Most people like the K24 for its early torque so you dont need to hit 6K just to find power like in the k20. Dont get me wrong, I am not a tuner, but most of the Dyno sheets I have seen from my tune, and some of the best Honda Tuners in the World (Jeff Evans) seem to always have max torque early as well as earlier Vtec for stock K24A tunes for the street. I made max torque by 4800rpm, but still made 233whp.. There was not large falloff, but yes, with the torque starting to fall off, you would not be able to make much power past 7500rpm, but you dont need to with a 25 degree vtc and 7800 redline. I can send you my dyno sheet and video if you want. Jeff Evans tuned my car.
4 роки тому
@@tuningbynick .. remember, the K24 head doesnt breathe as well as a K20 head, so at higher RPM with limited timing, even though I made earlier Torque, My power did not climb like in a K20 at high RPM. Due to the earlier max torque, my power fell off earlier(saw power dip right around 7500rpm and while your max torque being so late seemed to stabilize power more up top, but for me, HP numbers are not as significant as max torque number. And seeing early torque is ideal for most street cars who daily their cars. I dont know about you, but most people rarely ever see 6-8K rpm on the street. Having such good torque down low is a really nice change over the K20. If I was building for the track, then yeah, maybe I would want power distribution to be different, but I would also prob just throw on a k20 head with cams if that was the case and I needed more RPM and more power up top.
This is a great discussion, i honestly wish i had more time to put into it. All i can really say is every setup is slightly different and every dyno reads slightly different so unless the car was tuned on the same dyno its hard to do a direct comparison of the 2 setups. That being said, what i am hoping to be able to do here with my this car and these videos is to show as i modify the setup and change the up the parts. I hope to be able to show what kind of benefits/gains you can expect to get from each part. Some of the mods planned for the near future are a RBC 50* VTC gear, K20 Type S oil pump, RDX injectors. After that, the turbo kit and AWD conversion. Thanks for contributing with the comments, im glad you and others are participating in the discussions
4 роки тому
@@tuningbynick That's great man and I am really enjoying the vids and the different views from all different people. Looking forward to more content on this awesome car! K-series builds are always so enjoyable for me. Personally, I was just curious why your torque came in later, or if this was the power delivery you were looking to have from the beginning and why? I am not a tuner, so I do wonder why some people decide to engage Vtec earlier or later depending on setups and why some tuners choose certain power curves over others. From what I see here in the NE, the common K24A with bolt ons tune seems so have early peak torque around 4800rpm and earlier Vtec engagement. Why this is, I do not know, but I am curious as to why.
Could you send me your tune??? I have a 06 type s with a bone stock k24a2, rbc intake manifold, stock throttle body, short ram intake, full exhaust. Same exact setup as yours. I’m currently running a k24a2 base map I calibrated into the Kpro.
@@tuningbynick i got 2011 si with s2 alpha and s2 mega power rr j35 tb and a takada SR intake clutch and a light flywheel rest is stock. Datalogging every day becomes a pain.
Hey man, not sure if I posted before but looking to learn more on tuning and get my rsx tuned, I'm also located in Toronto. I believe I have everything I need to get a tune/basemap made. Whats the best way to reach you. IG? or email
Have watched countless videos over at PFI trying to get a better grasp on tuning. In one video you’ve cleared up so many questions I’ve had. Greatly appreciate your transparency in your work 🙏
we appreciate you being honest about tuning. Its such a secret with everyone and I respect honest people like yourself. keep it up
Thanks - Im glad you guys like the videos, i am happy to share the info, this info really shouldn't be a secret
i know Im randomly asking but does any of you know a tool to log back into an instagram account?
I stupidly lost my account password. I appreciate any help you can offer me.
@Diego Calvin instablaster :)
@Malcolm Casey Thanks for your reply. I found the site through google and im in the hacking process atm.
I see it takes a while so I will get back to you later with my results.
@Malcolm Casey it worked and I finally got access to my account again. Im so happy:D
Thanks so much you saved my account !
Have watched countless videos over at PFI trying to get a better grasp on tuning. In one video you’ve cleared up so many questions I’ve had. Greatly appreciate your transparency in your work 🙏
2:20 lol i know what that means!! i live where snow is a big deal. thats why i own a subaru and an evo x too, but my fully built k24/k20 civic si 8th is a gem on summer only !!
I’ve been waiting for a video exactly like this man thanks!
I think the cold weather is what really made the extra power. IMO maybe like 3 hp could be the kpro but the bulk is weather. I'm not a tuner so.... I know kpro is a better tuning tool than ktuner but it works. Ktuner was half the price and half the effort than kpro for me to get. I'm sure ktuner will get better in time. Thanks for the videos bro. Stay safe
You’re the best man! You really do keep to ya word! Cant wait for more
Thanks - Im glad you guys are liking the vids - If you have other requests, please let me know
@@tuningbynick 4 years later and I still come back to this video haha 🙌🏾
Better video thanks👍
love these vids keep me coming
Thanks, will do - If you guys have any requests to see other stuff just lmk
tthank you for video i ll wait for other video
I have a 05 k20z1 swap in my 97 hatch using Kpro. I use that same ecu on my 03 Rsx (a2) just have to swap/cut 2-3wires.
The vids I’ve been waiting for 😊 keep them coming dude
Thanks! If there is other stuff you want to see, please let me know
Tuning by Nick I’m the guy who’s been emailing you about the button pop and crackle so you know what videos I want buddy! Keep up the good work, one of the most informative tuning videos on UA-cam, great to watch and learn.
Not to worry - I havent forgotten about that, im going to be getting to that next i hope
I would love to get a tune by you one day !
Id be more then happy to help!
Keep it coming
Will do - If there is other things you guys want to see, just let me know
That was my first setup like yours after that i put the throttle body j37 and long intake 3.5 and get 250 hp with 199tq
J37 is DBW - was your setup in a 8th gen civic?
@@tuningbynick my first setup was stock rbc stock throttle body stock injectors stock fuel pump header ktuned 2.5 and skunk2 cat back 3" with a short ram intake afdynamic 2.5 with base map y made 229hp after dyno tune the car was on 238 hp after that i put the throttle body j37 and the long air intake 3.5 ktuned give me 250hp and still stock injectors and fuel pump i still have room to grow and i think i can go to 260 hp on porting the rbc thermal gasket and 4" intake by the headlight plus injectors and fuel pump everything on 93 fuel
By the way im full k24 nothing from k20 just the vtc
@@kevinpagan9168 Sounds like a good setup - You should a do a video and show everyone the results of the next dyno visit
Just lost my pwp Rsx 😞 this vid makes me smile again when I get another one I want you to tune it bro
I would be happy to tune your next one!
Man you are great …
Hi, I have the same set up in my 93 eg K24a2 08/ Ep3 trans.. Rbc - types tb - PLM header - 2.5 exhaust. Stock internals 25 vtc. Injectors on 93 octane. Could if possible you send me this tuned file 🤔. I've not saved enough $$ to get around on a full tune with 50vtc.
Shoot me an email and we can figure something out - nick@tuningbynick.com
Sure thing bro Thanks much appreciate.
KMiata sells a 50vtc for $198.00 and they have pin kits if you want to stay on the safe side and not jump past 40degrees.
Love it man!! What kind of wheels??
Are u telling me, that you live where it snows and don’t own a shovel?
Very informative video 👌
Hey Nick, how safe do you think the basemap for a k24a2 is for circuit racing? My car is a 05 k24a2 swap integra (stock long block, injectors, intake manifold) with a ktuned budget header and 2.5 in straight through exhaust?
I really dont think the basemaps are good enough for circuit use. Nothing is as hard on an engine as circuit use - 100% i would recommend a proper dyno tune before circuit racing.
Nick, all the power measurements in your videos from the wheels? Or from the flywheel , adjusted. Thanks!
Hello I have a 2005 Rsx. I’m gonna install a k24a but first I need to find a kpro with the harness that fits with 2005 ( same like yours) where I can get one, thank you
Hondata
Man I'd love to have you tune my Kswapped S2K
Very inofrmative video!
Can you pls explain more on the VTC window. On how to properly tune it.. and how will you know if you need to add more degree or not.
I can definitely make a more detailed video just on VTC - But check out my K24 RSX Swap video i go into more detail on VTC angles
That would be very helpful!! 🙂
Appreciate it if you’ll make a vid on it.and walking it through..
Thanks a lot!
Great video as always. I've been messing around with kpro v4 for a little bit on my ep3 with the k20a3. Your vids are a great help in understanding the software. I want to get familiar with everything before swapping in my k24. If I send you my calibration for the k20a3, would you be able to refine it and maybe setup a crackle tune also,for fun?
Shoot me an email, im sure we can figure something out - nick@tuningbynick.com
Thanks for the quick reply. I'll be emailing you when I get out of work.
Add a ton of fuel with negative ignition at the rpm you have your two step at
thank you!
I know you don't have this car anymore Nick but, when you eventually went boost did you install a different external wideband like an AEM one? Or is the 02-04 wideband good enough for boosted application (I heard its wideband)?
I have a question.
Some on the videos said . Need to turn off the wide band if u have stock o2 sensor or it will blow up the motor .. 😅 thats kinda scary me . Anyone could help ?
Please elaborate on the speed sensor gear issue, not worrying about cruise control, but will the speedo read correct?
Im not exactly sure what youre question is - But if you are using a Kpro V4 there you can make either type of speed sensor work and your speedo will read correctly. You might just need to change some wiring - Check out the VTEC Academy Channel - they just did a video on how to wire it up
Question,I've got a 76mm throttle body and only the opening of my RBC is port matched. How much of a difference will it make to get the manifold fully ported? (Cut open, porting the runners)
Port work like that is super hit or miss - If its not done really well, you can actually loose power by unbalancing the flow of the runners. Its also usually expensive to do. Id maybe consider Drag Cartel DIC cams first, you'll get a lot more power that way - Check out my EP3 Drag cartel cam video if you havent already
@@tuningbynick ok thanks man
Anyway you can compare kpro to ktuner? Which one is most preferred from your standpoint?
Great video, just a quick question.
Should you be disabling secondary o2 if you have a hiflow cat?
You can, technically you dont have to if you have a hiflow cat
Hi Nick, love the videos. Im currently enjoying a k24a2 in a dc5. Have you ever done a dyno comparison with a 50 degree VTC vs stock?
That is one of the videos i am going to do in the fall. Ive tuned many K24A2's with 50* and it really depends on the mods. A lot dont need the 50* wheel
Thanks for this video! It looks really scary messing with all those numbers! Quick question if you don't mind: I just have an intake & exhaust and plan to get K Pro soon, will I be fine just using one of their base maps without messing with any of the other configurations? Or would you recommend I get it tuned after K Pro is installed by a tuner? I'm new to K Pro and tuning! Thanks for the time and video!
Echizen32k Media you can get by by using the base maps on the kpro theirs maps specifically for basic bolt ons , but base maps are usually not to accurate depending on set up wise but you shud be fine
Agreed - the kpro base maps are a great starting point and you can usually drive around on them with no issue. However doing so really sells your setup sort, this video is a perfect example, nearly 30 hp difference between the basemap and final tune
you are best
Hey check it out you said you've done a bunch of tuning for K24 I need a base map for a K24 Turbo if you happen to have one shoot me a message
Hey Nick, what's your wheel set up with those Konigs? Really digging it
Thanks - they are Konig Hypergram 17x8 - I'm not sure on the offset tho, they came with the car
hey i have a rsx 2003 base, i need help building it up man, you can help? Im in toronto!!!!
I am always happy to help, best way to reach me is email - nick@tuningbynick.com
Nick, im gonna start my EM2 k-swap soon, but i need a parts car! Like a crashed rsx or ep3, where do you recommend i look or can get one?
I found this car on FB marketplace. If youre are local tho, email me, i can set you up with a friend that gets auction cars
Tuning by Nick I’m from the east coast, any way to get one back here, or one more local?
@@WelshyAutomotive Like he said, facebook marketplace or Craigslist.
Do you have any map for a stock k20a2 with rbc mani and rdx injectors 1320 headers? Need one to drive it to the shop any help please appreciated me f u can help
Mr360allday - best thing you can do is just use your original tune and chance the injector size to 440. That should be plenty good so you can get it to the shoo
Dumb question but would tuning the A/F ratio be the same way with Ktuner ?
So you need the 02-04 o2 sensor for kpro if it’s a 05-06, correct? how about the fuel ratio sensor, doesn’t matter if it’s an 05-06? or does it have to be 02-04 as well?
Im working on my tune and about the part where you copy all the maps, which map to you recommend copying them from? Im only street tuning with no dyno in my area.
The best way to do it would copy the the corresponding section of the maps that line up with the VTC settings. Problem with that is there usually requires a lot of smoothing
Usually the safest option is to use to use the zero VTC maps.
But there are so many basemaps out there that is not always the case.
Best rule of thumb is use the least aggressive map as your starting point
Do you happen to know what k24 would be easiest to swap into a 2003 rsx type s? I have a hondata Ecu with kpro that was in the car when I got it and the stock k20 with about 185k miles. Just looking for options as I get into the higher miles.
There are a lot of options for K24, but The easiest and best bang for buck would be the 2006-2008 Acura TSX K24A2
@@tuningbynick does the stock k20 manifold fit on the k24 head? have you done any k20 heads on k24 blocks? sorry for so many questions haha
Hey Nick, I just started watching your videos. They're very informative and I'm truly enjoying them. Keep up the good work!
I have a '04 RSX Type S and I installed a K24A2 from a '04 TSX. It has Skunk2 Stage 1 cams, 50 deg VTC, DC Sports race header, Yonaka 2.5" exhaust, RBC intake, stock RSX throttle body and an AEM V2 intake. This is all managed by a KPro2. Unfortunately, I'm only running on a base map. I'd definitely be interested in having you possibly tune my car (when this covid business is over).
I was debating on upsizing to a 70mm throttle body (from stock) and switching to a Hybrid Racing cold air intake (from an AEM V2 intake). What are your thoughts? Do you think I'd realize decent gains (after a proper tune of course)?
Thank you.
Andy
Quick question im going k24a soon on my 06 rsx type S will my skunk2 header fit I've ask a few people some say it does some says it don't, and what motor mounts are u using for the k24? is there anything I need before going k24a? Beside crv post mount? Sorry for all the questions lol
My header hit the sway bar so i just removed the sway bar - I never tracked the car, but i realistically felt no difference on the street - You'll want to swap over thermostat housing and thermostat from your K20 to the K24 and the K24 crank position sensor has a different pinout then your K20 - But thats about it - the K20A.org forum is a wealth of information on this stuff
@@tuningbynick Awsome thank you for your reply !
Hey Nick, I just installed the modified 02-04 rsx kpro that’s designed for the 05-06 as I have the stock k20z1 in my 05 type-s. I was curious if I would have to swap my kpro out for an 02-04 normal kpro once I put in my k24/20 build? Is the 05-06 kpro what you are currently running just with a different calibration/map?
You wont have to change the kpro for your new engine - the thing to keep in mind with ECU's is you usually just have to match them to the specific year or model of your car because the wiring pinouts is what usually changes from year to year but the engines will stay the same - That is why the 05-06 Kpro has a jumper harness
Hi nick what’s you catalytic converter setup? My catalytic is probably getting to hot and leaks, and breaks. Do you use the k24 header or rsx header? I have k24/k20
Sir Holmes this car has no CAT.
If i have a converted kpro for my 0506, can i use my friends tune from his 02 rsx? exact same setup, injectors and all. I have the 0204 primary sensor as well
You can definitely give it a try - You'll need to change the speed sensor settings - But, even if there are similar builds no 2 setups run exactly the same. Im sure it will still need some tuning
Why did you change from ktuner ecu to hondata kpro?
Ronald San Pedro - I like the software way more.
@@tuningbynick thanks. Btw i have friend in calgary who wants to swap his 05 civic SIR facelifted model with a k24. I have a few questions.
1. Is the jdm k24a 3 lobes the same as the 06-08 acura tsx k24a2? If not which on is better and easier to swap in the ep3
2. Is it worth it to get the kpro ( 699 usd) vs ktuner ecu (450 usd) for this build? It will be a mild all motor build only.
3. Do you offer etune service?
Personally I would choose Kpro and yes I do offer etuning - Shoot me an email and I’d be happy to help
nick@tuningbynick.com
@@tuningbynick thank you. Is the jdm k24a 3 lobes the same as the acura tsx k24a2 06-08? He is still shopping for an engine. Whats your suggestion for a k24 build ep3?
Good info!
Thanks!
Does this car have a check engine light?
question, not related to the this video tho, whats the usual duty cycle u get on b16 or b18 engines ? stock injectors 240cc, and preferably not stock.
It really more depends on the power level the engine is making - The stock B series injectors are small. They are usually at max duty cycle at just a bit over 200WHP
@@tuningbynick i currently have around 165 whp and am aiming at around 180ish
Nice so I don't need AFR gauge. Didn't know rsx runs wideband and can read on kpro
Are the base maps included in kmanager exactly the same as their flash tunes?
there are a lot of basemaps, i dont know if they are are the same as their flash tunes tho. I am not a Flash Tuner so i cant compare unfortunately
Are you familiar with tuning k tuner software as well ?
Yes I am - I am a ktuner dealer
Nice.. I have a question for you.. I have a 05 rsx s with k24 bottom end and I notice they sell an 02 sensor thats required for k tuner.. What is that primary 02 sensor for and do I really need it? Thanks
Where are you located ? And where are you getting you're swaps from ?
Troy Sanchez I’m in Toronto. I deal with a bunch of wreckers. That know I’m always looking for engines.
What's the wheel horse power with this set up?
These results are wheel HP
Hey man one question, what stage clutch?
Im not sure exactly what clutch - I got the car with it. It was some sort of 6 puck clutch
So I’m currently running a k20/24 with stock z3 cams would it be worth it to swap in my k24 cams?
If they are 06+ TSX cams it would be worth the swap
Where are you located at nick? I'm interested in getting a tune!
Great - I am in Toronto, its best to email me directly and id be happy to discuss - nick@tuningbynick.com
Can you tune my RSX friend? I want my 05 type S to have 500 hp please. And set mt VTec to engage at 1000 rpm.
Bruh, you can't just tune a car to have 500 hp without all kinds of changes. It only has 150 hp to start with. How are you gonna jump from 150 to 500 without almost changing the entire engine out.
@@destinseese34 pretty sure it's a joke tbh lol hope so
Damn... not bad at all...
Final run how many degrees of vtc? 🤔 can u run up to 40° of vtc on k24a2?
Final run was 25° for the whole rpm range, its still a stock gear, so 25° is the max. I will be swapping in a RBC 50° wheel and yes you can run yup to 40°
I have a custom 40* VTC.. works like a charm.. Had some nightmare scenarios with the 50 on a stock K24.. I feel much more comfortable with a physical limiter over a 50* with an electronic limiter that cannot account for all circumstances.
What front lip is that?
Its one of those universal stick on lips you can get on amazon/eBay
Seems your peak torque is coming in really late compared to alot of k24's I see(past 6K).. Most see max torque by about 4600-5000rpm.. And in doing so, they seem to get better torque numbers as well. Most people I see get 185-195tq on a k24 with full bolt ons.. When is Vtec engagement?
How much HP are they making tho? If they are making that much TQ down low they would be making 250+ Wheel HP - That is realistically not accurate for an internally stock TSX engine. Its possible that other dyno has a higher correction factor setting which adds free HP - Mine is set at Zero. No free HP here on my dyno
@@tuningbynick .. They are usually making similar numbers(I made 233whp, 193tq) The torque starts to fall off earlier, but the HP still climbs up to 7500.. And unless you are running a k20 head or a 50 degree VTC you dont need power climbing past 7500 really. And for the street especially, having max torque so early is really nice rather than having to rev out the motor. Most people like the K24 for its early torque so you dont need to hit 6K just to find power like in the k20. Dont get me wrong, I am not a tuner, but most of the Dyno sheets I have seen from my tune, and some of the best Honda Tuners in the World (Jeff Evans) seem to always have max torque early as well as earlier Vtec for stock K24A tunes for the street. I made max torque by 4800rpm, but still made 233whp.. There was not large falloff, but yes, with the torque starting to fall off, you would not be able to make much power past 7500rpm, but you dont need to with a 25 degree vtc and 7800 redline. I can send you my dyno sheet and video if you want. Jeff Evans tuned my car.
@@tuningbynick .. remember, the K24 head doesnt breathe as well as a K20 head, so at higher RPM with limited timing, even though I made earlier Torque, My power did not climb like in a K20 at high RPM. Due to the earlier max torque, my power fell off earlier(saw power dip right around 7500rpm and while your max torque being so late seemed to stabilize power more up top, but for me, HP numbers are not as significant as max torque number. And seeing early torque is ideal for most street cars who daily their cars. I dont know about you, but most people rarely ever see 6-8K rpm on the street. Having such good torque down low is a really nice change over the K20. If I was building for the track, then yeah, maybe I would want power distribution to be different, but I would also prob just throw on a k20 head with cams if that was the case and I needed more RPM and more power up top.
This is a great discussion, i honestly wish i had more time to put into it. All i can really say is every setup is slightly different and every dyno reads slightly different so unless the car was tuned on the same dyno its hard to do a direct comparison of the 2 setups. That being said, what i am hoping to be able to do here with my this car and these videos is to show as i modify the setup and change the up the parts. I hope to be able to show what kind of benefits/gains you can expect to get from each part. Some of the mods planned for the near future are a RBC 50* VTC gear, K20 Type S oil pump, RDX injectors. After that, the turbo kit and AWD conversion. Thanks for contributing with the comments, im glad you and others are participating in the discussions
@@tuningbynick That's great man and I am really enjoying the vids and the different views from all different people. Looking forward to more content on this awesome car! K-series builds are always so enjoyable for me. Personally, I was just curious why your torque came in later, or if this was the power delivery you were looking to have from the beginning and why? I am not a tuner, so I do wonder why some people decide to engage Vtec earlier or later depending on setups and why some tuners choose certain power curves over others. From what I see here in the NE, the common K24A with bolt ons tune seems so have early peak torque around 4800rpm and earlier Vtec engagement. Why this is, I do not know, but I am curious as to why.
Hey where are you located
Im in Toronto
Tuning by Nick sweet perfect
Do u offer one on one lessons
I do. Shoot me an email and I would be happy to discuss. nick@tuningbynick.com
What VTC you used?
Could you send me your tune??? I have a 06 type s with a bone stock k24a2, rbc intake manifold, stock throttle body, short ram intake, full exhaust. Same exact setup as yours. I’m currently running a k24a2 base map I calibrated into the Kpro.
Need to get it tuned but waiting a month or so for the money
I do sell basemaps - Shoot me an email and i would be happy to discuss - nick@tuningbynick.com
Tuning by Nick sweet I’ll shoot you a email
Tuning by Nick I’m having trouble finding the email... tried sending you one.
Manny Sand - sorry. Autocorrect messed up the email in my reply. It’s nick@tuningbynick.com
Got any 8th gen flashpro maps lol?
I have lots
@@tuningbynick i got 2011 si with s2 alpha and s2 mega power rr j35 tb and a takada SR intake clutch and a light flywheel rest is stock. Datalogging every day becomes a pain.
What wheels are those
connor quiring Konig Hypergram I believe. They actually came with the car.
Hey man, not sure if I posted before but looking to learn more on tuning and get my rsx tuned, I'm also located in Toronto. I believe I have everything I need to get a tune/basemap made. Whats the best way to reach you. IG? or email
either one is good - shoot me a msg of email, id be happy to discuss
What wheels are those?
I believe they are Konig hypergram. They actually came with the car.
Have you ever heard of a shovel?
Great video... Although I couldn't help but face palm after what you
Went through... Why didn't you just shovel the snow before pulling out 😅🤦🏻♂️
i honestly didnt think that little bit of snow was going to be an issue
lol guy lives in Ontario with a snow shovel
Cool video. But not to be an azz. Ever heard of a shovel?
watching you trying to get unstuck in 4 inches of snow made me cringe, especially with a fwd car.
Have watched countless videos over at PFI trying to get a better grasp on tuning. In one video you’ve cleared up so many questions I’ve had. Greatly appreciate your transparency in your work 🙏