Для тех, кто про сварку знает только о "зайчиках"))) С медью варится любой(практически) металл обычным аргоном)) Вид у сварного шва сомнительный - я о том, что под воду, давление и прочее шов "потечёт"(имхо) Итог: сварка для рукоделия)) точно как и чудо термоклей. Как-то аргоном сваривали два лезвия в стык)) вот только жаль тогда ещё не было телефонов и инета, чтобы всё это запечатлеть))
Cold welding is a phenomenon where two flat metallic surfaces join in vacuum or inert atmosphere that prevents oxide layers from forming. This is just tig spot welding. You see the plasma arc.
@@JC-zi5zo buddy, cold welding is when two pieces of the same metal abrade together without oxygen to for a passivating oxide layer. The two pieces fuse together because they are so close and uniform to each other that the electron soup present in metallic bonds doesn’t encounter any barriors and they join as one piece. Argon from tig welding doesn’t remove the oxide layer, it just prevents one from forming after the metal is melted by the arc. This isn’t cold welding. The metal is joined by melting, not galling.
Само интересное , то что ни в одном ролике нет полной картинки аппарата ,для не понимающего зрителя такое ощущение, что это чудо ручка стреляет дугой и красиво варит метал , но на самом деле это не маленький аппарат , оно подходит больше в производстве в цехах , это не маленький и не компактный аппарат !
The only thing I can think of that is practical for this is chainmail and honestly I can probably still do it without a tig welder with a cold setting and get a more reliable weld.
@@Eugen_Mix Быстрее поверю в косяки перевода , либо" маркетинговая терминология". Что "cool welding " исходно задумано как " крутая сварка" ,а не " холодная" ))) Какая " холодная " если всё это аргон и без сварочный ванны не обошлось . Контактная холоднее будет.
Там во всех видосах этого канала не далеко лежит упаковка "холодной сварки" ( двухкомпонентная эпоксидная паста с наполнителем ) , просто в кадр не попала)))
@@user-sb9xe4ri2x глянул английскую версию, там таки cold :) так что все таки это чисто маркетинг, а где он рукой шов трогает, там склейка, посмотрел бы я на него, если бы он сразу схватил бы после сварки
@@Eugen_MixДа, Вы правы . Обидно))) сорвалась гипотеза ,но это ничего , канал всё равно пустой , кроме залипательных видео с презентаций ничего , только время отбирают.
Не важно сколько времени ты смотрел ,есть ещё стастика удержания аудитории и там отображается сколько времени смотрят ,а количество про смотров растёт хоть ты 10 секунд посмотришь.
@@LG-gb4fl Это была шутка - железных труб в природе не существует, все трубы идут из сплава: железо + углерод = сталь, без углерода - железо мягкое как пластилин и быстро окисляется на воздухе.
железо один из редко земельных металлов. Во время ВОВ нашим солдатам выдавали золотые медали (не все и не за любые заслуги естественно), а вот фашисты выдавали медали( кресты) из железа.
Everywhere you start and stop at it creates a crack that's why when tig welding you start and do the entire length of the bead walking or freehand with filler wire this is like pulse fusing won't pass on roll cages or pipe I don't think but it is neat on sheet metal
Реклама получилась супер! Да! Сваривает наглядно и красиво! А дальше.....? Мля ну не о чем.... Может все же продолжения следовало бы сделать? Люди интересуются узнать по подробней про сее устройство. Надо бы подумать Вам над этим. Тем более если есть замашка на комерческие предложения почему бы не сделать расширенный обзор с подробной информацией. Поставил лайк. Понравилась работа аппарата. Иногда ох как не хватает такой сварки для тонких работ, которые обычной сваркой сделать практически не возможно!
This technology is not new, just released to the public now. For the Space Shuttle launch pad they had to ground it to dissipate static electricity, the ground stakes were a stainless pipe with a copper core for conductivity. They developed the technology to bond the two metals to make it work, the stakes were pounded twelve feet into the ground, and replaced after each launch, the discarded stakes were sent to government facilities to cut into very small pieces to deter anyone from decoding the process. We worked at E- cycle, a government approved facility and had the chance to recycle the small peices. Now that the shuttle program is history, that technology is released.
No... it's inferior technology China cooked up to help unskilled workers make pretty weld beads. There are several reputable welding channels that have reviewed these and this process, and they agree that the welds are structurally shit. This would also be useless for welding a core within a pipe. If any of that story is true, then they most likely used friction stir welding. Also, how does a small piece make it harder to discern what welding process was used? A 1mm slice could be polished and etched and give a lovely view of the bead profile.
You can always bond copper to steel! Ever heard of brazing? This isn’t cold welding either, its a high amp spot pulse mode on a tig welder which has poor penetration and weak welds.
Thank you so much for sharing that. I was trying to figure out what I was watching but don’t know enough to find it on the internet. I should have looked down the comments first.
i dont mean to be so offtopic but does any of you know of a method to log back into an Instagram account? I was stupid lost the account password. I love any help you can offer me!
@Julian Jackson thanks for your reply. I got to the site through google and im in the hacking process now. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@@derekhaydon4656 its not brazing .This is cold welding,a new technology in wich materials are attached together similar to the explosion welding wich is another form of cold welding.
Ну процес так и называется холодная сварка, он ближе к конденсаторной точечной сварке, мощный импульс выстреливает сплавляя даже разнородные металы ... ты что в розетке ни когда не замыкал )), пых и приварились провода между собой... много там тепла выделяется? Ну, а в конденсаторной 60.000 микрофарад, щелчек и всё , но как правило оно для мелочи
@@АлександрУльянов-б3ш Да не обычная, а модели из последних с опцией "Cold", т.е. холодная, на самом деле она не холодная а просто короткая по времени поэтому тепло быстро рассеивается и можно потрогать рукой через секунд 5. Популярные модели сегодня это Andeli 250PL, она AC & DC т.е. может варить алюминий. также ANDELI TIG-250PACE. Подешевле также есть это Аndeli 250MPL только DC т.е. для стали. Разница с обычным TIG только в том что для "Cold" не надо особого опыта, новичок сразу может варить любые металлы. Идеально подходит для ювелирки, я имею в виду ремонт по золоту или серебру, но надо специальную поменьше горелку покупать. Недостатки - часто не проварено если детали больше 4-5мм. Но в основном хороший контроль при работе с малыми размерами деталей без охлаждения и всяких подложек. Также есть Итальянские модели с "Cold", но подороже. Уважающие себя компании эту опцию ставить в свои модели не собираются, т.к. считают что любой профессионал может получить тот же результат с обычным Тигом. Кстати модели с пульсацией очень близко к "Cold" режиму. www.aliexpress.com/item/4000917494242.html?spm=a2g0o.detail.1000060.2.d0807f90qeGbk3&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.169870.0&scm_id=1007.13339.169870.0&scm-url=1007.13339.169870.0&pvid=688e2187-44a5-4114-b1f4-125c53cc6832&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.169870.0,pvid:688e2187-44a5-4114-b1f4-125c53cc6832,tpp_buckets:668%230%23131923%2388_668%23888%233325%2320_668%232846%238115%232000_668%232717%237566%23806_668%231000022185%231000066058%230_668%233468%2315618%23916 или www.aliexpress.com/item/4000081071759.html?spm=a2g0o.detail.1000014.21.3baf6719rRwnwP&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.33416.205108.0&scm_id=1007.33416.205108.0&scm-url=1007.33416.205108.0&pvid=ef0eb64c-69a6-462e-87c3-48b7aff9ffb6&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.33416.205108.0,pvid:ef0eb64c-69a6-462e-87c3-48b7aff9ffb6,tpp_buckets:668%230%23131923%2393_668%23888%233325%2320_23416%230%23205108%236_23416%234721%2321967%23533_23416%234722%2321972%238_668%232846%238115%232000_668%232717%237566%23806_668%231000022185%231000066058%230_668%233422%2315392%23847_4452%230%23211409%230_4452%233474%2316498%23776_4452%234862%2322449%23731_4452%233098%239599%234_4452%235108%2323442%23266_4452%233564%2316062%23160 Подешевле, только DC: usa.banggood.com/ANDELI-TIG-250MPL-TIG-Welder-220V-Intelligent-TIG-Welding-Machine-COLD-or-PULSE-or-TIG-Welding-Cold-Welding-Spot-Welding-Tig-Inverter-p-1774622.html?cur_warehouse=CN&rmmds=buy
Yeah you could see the crack forming as the "welding" progress. Nothing structural use for this, joints are weak at best, maybe something ornamental work. Just like engraving, pretty but that's it.
@@MJPilote this process was designed as a micro welding process.. super thin metals, breadboards, joining wires.. the issue with the wled shown is that capacitance dischage blows a hole in the middle.. and thr fast freeze causes the crack with the copper alloy.. Both of which could be overcome with the right filler.. once roooted, cap with a normal process.. but this is would be great for small things..
john Jacob jingle You could do a real world test, on structural resistance, how much force it takes to break the weld on different material. And welding in realtime and not show speedup welding. We want facts not just fiction and pretty results.
@@armansalibayev9853 аппарат новопакс , в настройках от постоянного тока до импульса в секунду . Алюминий не варит . Всё остальное легко . Брали лет пять назад за пол ляма в Ростове . Он для мелких работ . В основном восстановление кромок на литьевых пресформах по пластмассе . Без раковин , поджогов и не нарушая структуры металла .
Старые сопли могут склеивать железные и медные трубы. Ещё первобытные люди запатентовали этот метод. Качество шва соответствует качеству из этого видео ролика.
Buenas tardes disculpe la molestia quizás tal vez usted me pueda ayudar vi su publicación en un vídeo de soldadura yo soy nuevo en el arte de soldar con la tig no sé si tal vez usted me pueda ayudar Qué tipo de parametros se coloca en la máquina para que suele solo por puntos y sin material de aporte yo dispongo de una máquina Miller corriente alterna y corriente continua son de las grandes son las industriales pero digamos que por falta de conocimiento No le he podido sacar al máximo a la máquina no sé si tal vez usted sabrá Qué tipo de parámetros son lo que les coloca para que suelde de esa manera si me puede ayudar Muchísimas gracias
What is the electrode made out of ? It doesn't look like tungsten, is this a process where this is used when very little or no filler rod is needed ? Thanks for the video, very interesting 👍.
Это TIG-сварка с малой частотой импульса. Есть подобные ювелирные аппараты, но здесь сила тока, думаю, 130-150 ампер, а в ювелирных - 30-50, способных варить лишь совсем небольшие элементы.
Isso é solda Tig (tungstênio, inert, gás). Não tem nada de solda a frio. Concentra um feixe de plasma de altíssima temperatura na ponta do eletrodo de tungstênio, sob a proteção de gás argônio puro. Um sistema Tig sai em torno de R$2500,00, o preço pode variar conforme marca/modelo. No Mercado Livre tem.
Yes, but you have SKILLS... The average rice eater making 9cents an hr with no bathroom breaks doesn't. I could teach my dog to run one of these. Big question is how strong are these welds and what kind of penetration are they actually getting?
@@jagboy69 talking about transition welding (i call them in that way) these are mainly used in research area, there are no mechanical sresses to withstand, however it is a full penetrating welding that made a good yoint. It's not my skill, they fuse together by themselves.. 😂😂😂😂
@@alec-s I tig weld myself but really suck at stainless. I wonder if we could up the power to around 500amps if something like this could blast thicker stuff together? This thing is slow as hell, but could be easily automated. I could then drink beer and watch it work.
@@jagboy69 stainless steel is a bad conductor of heat, so to weld it well you need low amperage, because the heat generated by the arc won't flow away easily, resulting in an easy going welding basin. If you melt copper and stainless together you just have to keep in mind to give more heat towards the copper while welding..... As you do when welding joints with very different thickness... What you have to weld with 500amps? I just needed that amp twice when welding big alluminium disc 30mm thick 1 m diameter..... But it's easyer if preheating the metal by oxyacethylene flame...
@@alec-s Interesting... I've tried low amps and it's just resulted in a more heat put into the part because of my wayy slower travel speed. This caused really black and cooked welds. Justin on the fabricator series suggest higher amps, faster travel speed and this results in less heat. What do you suggest for .125" stainless butt weld as a starting point for amps? I'm willing to try anything at this point. Thanks!
It's called cold welding because unlike the standard Tig process where the arc is constant and a puddle of molten metal is moved, this process only makes what I can only describe as tiny instant puddles that don't get "dragged" along the metal
exogator It’s literally just spot welding. Most tig welders can do this. This is not referred to as cold welding and never will be. This is using electrical energy to melt the two metals and fuse them. Cold welding occurs when there is not heat or fusion being introduced. It has only ever been found to happen in space or controlled nano vacuum environments.
Необходимо купить машину, пожалуйста, обратитесь в WhatsApp для получения подробной информации: 86 18156331680 или по электронной почте: 2379277542@qq.com
Я извеняюсь конечно НО... Помоему это просто аргонка, то бишь TIG. Импульсный режим для прихватки , хитрый автор взял держак за керамический колпак и .... о чудо "Новый аппарат холодной сварки может сваривать железные трубы с медными" Так то оно даже газовой сваркой можно медь со сталью сварить а уж аргонкой то.....
На сколько ж хватило ума электро дуговую TIG сварку с вольфрамовым электродом назвать холодной!? Я пробовал на работе ради прикола полуавтоматом в среде аргона сварить алюминевой проволокой стальную пластину с алюминивой. И сварил!даже шов не плохой вышел. Но только прочности никакой! И куча пор в нутри шва когда разломил. Но слепить слепил...! По технологии медь сваривают в среде азота....! А это обыкновенная электродуговая сварка не плавящимся электродом, а не холодная как выразился автор для лохов!
Для тех, кто про сварку знает только о "зайчиках"))) С медью варится любой(практически) металл обычным аргоном)) Вид у сварного шва сомнительный - я о том, что под воду, давление и прочее шов "потечёт"(имхо) Итог: сварка для рукоделия)) точно как и чудо термоклей. Как-то аргоном сваривали два лезвия в стык)) вот только жаль тогда ещё не было телефонов и инета, чтобы всё это запечатлеть))
А для такого оппарата газ балоны всё такое нужно ?
@@Ali-xq8bw конечно нужен, это сварка в защитном газе, в данном случае - аргон
Полное фуфло.Аргон он и в Африке аргон.Автору делать нечего , пусть у кота проконсультирует мы ,что в таком случае делать надо
Cold welding is a phenomenon where two flat metallic surfaces join in vacuum or inert atmosphere that prevents oxide layers from forming. This is just tig spot welding. You see the plasma arc.
@@JC-zi5zo buddy, cold welding is when two pieces of the same metal abrade together without oxygen to for a passivating oxide layer. The two pieces fuse together because they are so close and uniform to each other that the electron soup present in metallic bonds doesn’t encounter any barriors and they join as one piece. Argon from tig welding doesn’t remove the oxide layer, it just prevents one from forming after the metal is melted by the arc. This isn’t cold welding. The metal is joined by melting, not galling.
Yah I agree with you, this video isn't cold welding, it's spot welding with tig.
Обзоров много, а где хотя бы одна ссылка на приобретение этого чудо агрегаты? Если ссылки нет то и нечего засирть Ютуб!
Need to buy a machine, please consult whatsapp for details: 86 18156331680 or email: 2379277542@qq.com
Ссылки есть, только цена этого товара космическая, вы не купите его))
@@LG-gb4fl так же как лазерного пескоструй.
Как по мне вот такие комменты и засирают UA-cam
Andelli делает аппараты импульсной сварки, ток щас ценник подрос из-за обвала рубля.
Хуль вы процесс??
Аппарат,обзор..
Щелкает криворукий.
Импульсная сварка в среде аргона холодная? Диз за заголовок.
По любому..
Что за идиотизм! Где комментарий, где характеристики условия применения?
Канал тупее не бывает )))!
Он стоит бешеные деньги и плюс балон аргона, импульсная, сварка.
@@user-wm5fh5ii1x бешеные это сколько? Чем отличается от полуавтомата?
@@user-wm5fh5ii1x . Бешеные, это сколько?
@@user-vx9jk8bs4m самый хуевый 70
Когда две трубы сваривл посередине шва трещина шла.
Да я тоже заметил. Либо это трещина или линия состава разных материалов метала и медью
@@dzhambulatshixamirov7432 они меж собой не сварились, ударь и отвалятся.
@@dzhambulatshixamirov7432 они слиплись.
А я думал мне показалось...
@@sergeyshurakov4788 не показалось, как цветмет с простым металлом сварить при помощи электричества, разные составы, лажа все это.
This look perfect for the small spot welds needed in craft work/model engineering
Magkano ang halaga ng weldingnayan
Само интересное , то что ни в одном ролике нет полной картинки аппарата ,для не понимающего зрителя такое ощущение, что это чудо ручка стреляет дугой и красиво варит метал , но на самом деле это не маленький аппарат , оно подходит больше в производстве в цехах , это не маленький и не компактный аппарат !
Открою секрет, ток никому... Есть уже компактные, по размеру с бытовой полуавтомат...
Onde comprar essa máquina? Mostra mais detalhes dela.
Tu já viu que tem pouco comentários em português
If you need to buy or understand the cold welding machine, you can consult whatsapp: 8618156331680, or email me: 2379277542@qq.com
The only thing I can think of that is practical for this is chainmail and honestly I can probably still do it without a tig welder with a cold setting and get a more reliable weld.
Só faltou mostrar a máquina ...
TIG....
Onde comprar?
Qual o valor?
Já existe em lojas " fízicas", aqui no Rio de Janeiro?
If you need to buy or understand the cold welding machine, you can consult whatsapp: 8618156331680, or email me: 2379277542@qq.com
@@crazywelding8123 good afternoon....I'am Brazilian man...i like
А вот ТРЕЩИНУ при сварке металла с медью ЕПТ ВИДНО.*!!! ЛАПУХ ВЫЛОЖИЛ ВИДЕО. Обычная ТИГ сварка, клацает выключателем.
I typed in "Zap welding" and this video showed up lol.
Причём здесь аппарат холодной сварки?! На видео показана аргонодуговая сварка
у него все видосы про эту "холодную" сварку
@@Eugen_Mix Быстрее поверю в косяки перевода , либо" маркетинговая терминология". Что "cool welding " исходно задумано как " крутая сварка" ,а не " холодная" ))) Какая " холодная " если всё это аргон и без сварочный ванны не обошлось . Контактная холоднее будет.
Там во всех видосах этого канала не далеко лежит упаковка "холодной сварки" ( двухкомпонентная эпоксидная паста с наполнителем ) , просто в кадр не попала)))
@@user-sb9xe4ri2x глянул английскую версию, там таки cold :) так что все таки это чисто маркетинг, а где он рукой шов трогает, там склейка, посмотрел бы я на него, если бы он сразу схватил бы после сварки
@@Eugen_MixДа, Вы правы . Обидно))) сорвалась гипотеза ,но это ничего , канал всё равно пустой , кроме залипательных видео с презентаций ничего , только время отбирают.
Wow 10 point ball show, I need one of those!
Да, для ювелирки самый то 👍
Если до конца не досмотреть то ролик не сситается просмотреным , что я и сделал, а такой аппарат у меня 50 лет
Не важно сколько времени ты смотрел ,есть ещё стастика удержания аудитории и там отображается сколько времени смотрят ,а количество про смотров растёт хоть ты 10 секунд посмотришь.
Это же TIG сварка, для нержавейки и цветных металлов, что в ней нового я не знаю, она появилась еще в прошлом веке...
А где же объяснение и характеристика данного аппарата , что же вы нам яйца морочите , ждём объяснений
Nice to know this new technology. Can you tell us the price and where to buy it from
If you need to buy or understand the cold welding machine, you can consult whatsapp: 8618156331680, or email me: 2379277542@qq.com
"Железные трубы" и безграмотный канал сразу фтопку с дизлайком
Твою мать ! Молодцы американцы !!!
I do the same with my Tig welder 200 amps quick squeeze of the trigger
@Gabriel Wilkerson some have a button remote instead of a foot pedal. Thats what I use
Сварочный аппарат купить не проблема, проблема купить железную трубу, ищу уже несколько лет, везде предлагают из стали.
Какую железную трубу вы ищите,не понятно?
@@LG-gb4fl Это была шутка - железных труб в природе не существует, все трубы идут из сплава: железо + углерод = сталь, без углерода - железо мягкое как пластилин и быстро окисляется на воздухе.
железо один из редко земельных металлов.
Во время ВОВ нашим солдатам выдавали золотые медали (не все и не за любые заслуги естественно), а вот фашисты выдавали медали( кресты) из железа.
@@user-n730 Надеюсь это шутка? Если нет, то видимо вы жертва ЕГЭ?
@@Igor_Belousov666 по-моему у кого-то мозги как пластилин
Deve ser uma maquina facil de fabricar caseiramente, porque ele nunca apresenta a maquina, só o serviço que ela faz
Eu quero ver a maquina ele so mostra a porcelana
Tambem acho. Facil de fazer em casa. Tem treta ai . Nunca mostram a maquina.😃😃
С такой сваркой нужно быть очень аккуратным, что бы ногти не приварить к трубе
Everywhere you start and stop at it creates a crack that's why when tig welding you start and do the entire length of the bead walking or freehand with filler wire this is like pulse fusing won't pass on roll cages or pipe I don't think but it is neat on sheet metal
Good job my friend.
Здравствуйте подскажите пожалуйста если можно как собрать такой аппарат. Спасибо большое заранее.
Реклама получилась супер! Да! Сваривает наглядно и красиво! А дальше.....? Мля ну не о чем....
Может все же продолжения следовало бы сделать? Люди интересуются узнать по подробней про сее устройство. Надо бы подумать Вам над этим. Тем более если есть замашка на комерческие предложения почему бы не сделать расширенный обзор с подробной информацией.
Поставил лайк. Понравилась работа аппарата. Иногда ох как не хватает такой сварки для тонких работ, которые обычной сваркой сделать практически не возможно!
This technology is not new, just released to the public now. For the Space Shuttle launch pad they had to ground it to dissipate static electricity, the ground stakes were a stainless pipe with a copper core for conductivity. They developed the technology to bond the two metals to make it work, the stakes were pounded twelve feet into the ground, and replaced after each launch, the discarded stakes were sent to government facilities to cut into very small pieces to deter anyone from decoding the process. We worked at E- cycle, a government approved facility and had the chance to recycle the small peices. Now that the shuttle program is history, that technology is released.
No... it's inferior technology China cooked up to help unskilled workers make pretty weld beads. There are several reputable welding channels that have reviewed these and this process, and they agree that the welds are structurally shit.
This would also be useless for welding a core within a pipe. If any of that story is true, then they most likely used friction stir welding. Also, how does a small piece make it harder to discern what welding process was used? A 1mm slice could be polished and etched and give a lovely view of the bead profile.
Onde comprar essa máquina de solda e qual é o preço ?
Gostaria de saber disso.
Também quero uma
Cara ta usando uma inversora com cachimbo de tig, com elétrodo 1.6mm.
Tu faz essa solda aí irmão?
Estoy interesado en una máquina de estás me puedes dar más información gracias
Você obteve resposta sobre a máquina de solda
@@AntonioOliveira-eu4ts parece ser uma ponteadeira , feita com trafo de micro ondas e um interruptor
acabei de var é uma soldagem TiG
If you need to buy or understand the cold welding machine, you can consult whatsapp: 8618156331680, or email me: 2379277542@qq.com
@@crazywelding8123 boa noite, vocês sabem onde compro essa máquina?
Why not show the machine to people to see??
Хоороший аппарат,при сварке механизма в наручных часах.
Железо с медью варить нет смысла ,съест.Школьная химия.
Только хотел написать. Нельзя варить разнородные металлы. Электрокоррозия. Разваливаются в труху.
Всё правильно,поэтому пользуемся " американками"
А как в холодильниках алюминий с медью? И ничего. Все новые холодильники такие.
@@user-ci4zs9jk4k Григорий в школу надо было ходить и переодияекую систему Дмитрия Иваныча учить.
@@user-ci4zs9jk4k в деталях типа C00031162 там спецпайка, спецприпой.
What kind of a welding machine is that?? Thank you.
tig welding
Looks like a light surface weld.
You can always bond copper to steel! Ever heard of brazing? This isn’t cold welding either, its a high amp spot pulse mode on a tig welder which has poor penetration and weak welds.
Thank you so much for sharing that. I was trying to figure out what I was watching but don’t know enough to find it on the internet. I should have looked down the comments first.
Wher can i buy a welding machine like this?
AMIGOS diganme que tipo de soldadura al oxigeno es, y cual es la maquina.Por favor.
This is not welding it is fusing metal together it's only suitable for very thin metal about 1mm thick. I am a mig and tig welder.
Ok thankyou where can I buy one of them ,thankyou
Mrpipspopper sv - me too, looks like spot welding with tig. Microscopic welds
A lot like me tack welding the seams of sheet metal boxes.
Um belo truque, truque de mestre!
больше всего нравится когда вольфрам залипает, а он его кусочками отрывает :) (БОЖЕСТВЕННО)!
Потом точить электроды!!
i dont mean to be so offtopic but does any of you know of a method to log back into an Instagram account?
I was stupid lost the account password. I love any help you can offer me!
@Darwin Idris Instablaster ;)
@Julian Jackson thanks for your reply. I got to the site through google and im in the hacking process now.
Seems to take quite some time so I will reply here later when my account password hopefully is recovered.
@Julian Jackson It worked and I actually got access to my account again. I'm so happy!
Thank you so much you saved my account !
Thanks a lot. Большое спасибо.
Does it work for CR sheet welding
I don't think a crack around the whole weld means it's welded.. Cold welding, LOL!!!!!
Glad I was not the only one to notice the cracks. Copper to STEEL is not welding, it's brazing. No filler and it's fusing, and not very strong.
@@derekhaydon4656 its not brazing .This is cold welding,a new technology in wich materials are attached together similar to the explosion welding wich is another form of cold welding.
Qual Marca e Modelo dessa máquina?
Молодец, показал. А что дальше?
Может *ИМПУЛЬСНО-ДУГОВАЯ СВАРКА ВОЛЬФРАМОВЫМ ЭЛЕКТРОДОМ?* Не ? Холодная сварка это полимерный хим состав .
Ну процес так и называется холодная сварка, он ближе к конденсаторной точечной сварке, мощный импульс выстреливает сплавляя даже разнородные металы ... ты что в розетке ни когда не замыкал )), пых и приварились провода между собой... много там тепла выделяется? Ну, а в конденсаторной 60.000 микрофарад, щелчек и всё , но как правило оно для мелочи
Ролик в подземном переходе снимали? 😁 А аппарат у циган для съёмки позаимствовали.
Цыган без работы оставил)))
Как же я отстал от научнотехнического прогресса, оказывается мона сваривать металлы не расплавляя их т.е. холодной сваркой 😯
Где купить такой сварка
Такой сварка нихде ни купишь.
Медь со сталью прекрасно варится и в постоянно нагруженной дуге ,в чём проблема ???!!!
Обычной мма медным электродом чугун варят👍
Бля , с января не сказал что за аппарат такой прикольный. Ну не по человечески, товарищ.
Обычная аргонно-дуговая сварка
Некоторые товарищи нам вообще не товарищи
@@АлександрУльянов-б3ш Да не обычная, а модели из последних с опцией "Cold", т.е. холодная, на самом деле она не холодная а просто короткая по времени поэтому тепло быстро рассеивается и можно потрогать рукой через секунд 5.
Популярные модели сегодня это Andeli 250PL, она AC & DC т.е. может варить алюминий. также ANDELI TIG-250PACE. Подешевле также есть это Аndeli 250MPL только DC т.е. для стали.
Разница с обычным TIG только в том что для "Cold" не надо особого опыта, новичок сразу может варить любые металлы.
Идеально подходит для ювелирки, я имею в виду ремонт по золоту или серебру, но надо специальную поменьше горелку покупать.
Недостатки - часто не проварено если детали больше 4-5мм. Но в основном хороший контроль при работе с малыми размерами деталей без охлаждения и всяких подложек.
Также есть Итальянские модели с "Cold", но подороже.
Уважающие себя компании эту опцию ставить в свои модели не собираются, т.к. считают что любой профессионал может получить тот же результат с обычным Тигом. Кстати модели с пульсацией очень близко к "Cold" режиму.
www.aliexpress.com/item/4000917494242.html?spm=a2g0o.detail.1000060.2.d0807f90qeGbk3&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.169870.0&scm_id=1007.13339.169870.0&scm-url=1007.13339.169870.0&pvid=688e2187-44a5-4114-b1f4-125c53cc6832&_t=gps-id:pcDetailBottomMoreThisSeller,scm-url:1007.13339.169870.0,pvid:688e2187-44a5-4114-b1f4-125c53cc6832,tpp_buckets:668%230%23131923%2388_668%23888%233325%2320_668%232846%238115%232000_668%232717%237566%23806_668%231000022185%231000066058%230_668%233468%2315618%23916
или
www.aliexpress.com/item/4000081071759.html?spm=a2g0o.detail.1000014.21.3baf6719rRwnwP&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.33416.205108.0&scm_id=1007.33416.205108.0&scm-url=1007.33416.205108.0&pvid=ef0eb64c-69a6-462e-87c3-48b7aff9ffb6&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.33416.205108.0,pvid:ef0eb64c-69a6-462e-87c3-48b7aff9ffb6,tpp_buckets:668%230%23131923%2393_668%23888%233325%2320_23416%230%23205108%236_23416%234721%2321967%23533_23416%234722%2321972%238_668%232846%238115%232000_668%232717%237566%23806_668%231000022185%231000066058%230_668%233422%2315392%23847_4452%230%23211409%230_4452%233474%2316498%23776_4452%234862%2322449%23731_4452%233098%239599%234_4452%235108%2323442%23266_4452%233564%2316062%23160
Подешевле, только DC:
usa.banggood.com/ANDELI-TIG-250MPL-TIG-Welder-220V-Intelligent-TIG-Welding-Machine-COLD-or-PULSE-or-TIG-Welding-Cold-Welding-Spot-Welding-Tig-Inverter-p-1774622.html?cur_warehouse=CN&rmmds=buy
I was inspired to see this
Your dissimilar metal pipe weld was cracked down the middle.. enjoy..
Yeah you could see the crack forming as the "welding" progress. Nothing structural use for this, joints are weak at best, maybe something ornamental work. Just like engraving, pretty but that's it.
@@MJPilote this process was designed as a micro welding process.. super thin metals, breadboards, joining wires.. the issue with the wled shown is that capacitance dischage blows a hole in the middle.. and thr fast freeze causes the crack with the copper alloy..
Both of which could be overcome with the right filler.. once roooted, cap with a normal process.. but this is would be great for small things..
john Jacob jingle You could do a real world test, on structural resistance, how much force it takes to break the weld on different material. And welding in realtime and not show speedup welding. We want facts not just fiction and pretty results.
what does the device look like ??? I want to buy
На моем аппарате есть подобный режим , очень удобно . Аппарат Novarax SE-V01.
А что за аппарат название сварки
@@armansalibayev9853 аппарат новопакс , в настройках от постоянного тока до импульса в секунду . Алюминий не варит . Всё остальное легко . Брали лет пять назад за пол ляма в Ростове . Он для мелких работ . В основном восстановление кромок на литьевых пресформах по пластмассе . Без раковин , поджогов и не нарушая структуры
металла .
есть ТИГ сварка мой тоже не варит алюминь но что там настраивать ? подскажи
Parabéns pelo vídeo, muito show ! Você pode me dizer o nome desta máquina e onde posso adquiri-la? Muito obrigado!
Tig tunston inert gas se clama em inglés
@@stevenmonson5149 isso é o nome da máquina
If you need to buy or understand the cold welding machine, you can consult whatsapp: 8618156331680, or email me: 2379277542@qq.com
ชอบคะ ใช้แก็สเชื่อมด้วยหรือเปล่า ราคาแพงน่าดู
Старые сопли могут склеивать железные и медные трубы. Ещё первобытные люди запатентовали этот метод. Качество шва соответствует качеству из этого видео ролика.
Se ve genial y simple...me gusta.
What is the parameters have u set?
Pulse current-
Pulse frequency
Como se hace para que la tig ...suelde de esa manera .. por punto.... o es una máquina tig con alguna función distinta
Buenas tardes disculpe la molestia quizás tal vez usted me pueda ayudar vi su publicación en un vídeo de soldadura yo soy nuevo en el arte de soldar con la tig no sé si tal vez usted me pueda ayudar Qué tipo de parametros se coloca en la máquina para que suele solo por puntos y sin material de aporte yo dispongo de una máquina Miller corriente alterna y corriente continua son de las grandes son las industriales pero digamos que por falta de conocimiento No le he podido sacar al máximo a la máquina no sé si tal vez usted sabrá Qué tipo de parámetros son lo que les coloca para que suelde de esa manera si me puede ayudar Muchísimas gracias
Да ну,что за чудо сварка отлично!
Какой аппарат холодной сварки? Что за бред? Это аргонно дуговая сварка
Точно так! Там просто низкотемпературная дуга....после сварки сразу можно трогать голыми руками!(от сюда и название)
@@user-bc8fx2pp6u низкотемпературная дуга?) Температуры плавления стали, нержавейки и т.д. обычно одни и не снизить их никак))
Да это аргонно дуговая.
@@user-yg8yr2xd1i Совершенно верно. Низкоамперная дуга в импульсном режиме.Способная расплавить только тонкий(верхний)слой металла.
@@user-bc8fx2pp6u до того низкотемпературная дуга что от короткого импульса сплавляется металл
Ok. Onde vendem esta máquina ? Não encontro. Como se chama ?
Can you give a brand of this cold weld machine? I want to buy it
If you need to buy or understand the cold welding machine, you can consult whatsapp: 8618156331680, or email me: 2379277542@qq.com
@@crazywelding8123 Hi
Абсолютно любой аргонник на это способен, все можно настроить под себя, ничего удивительного тут нет.....
😳😳😳😳 show de bola 👏👏👏👏👏😍😍😍 eu quero ima dessa, como fazemos para comprar?
eu não tenho certeza se tem.
Boa tarde qto custa está maquina
Bom dia como faço para conseguir uma máquina desta?
essa máquina é uma tig ou mig ?
aparentemente é tig!
@@bisnetodeportugues essa e a tig leizer
Tig arco pulsado solda fria...
What is the electrode made out of ? It doesn't look like tungsten, is this a process where this is used when very little or no filler rod is needed ? Thanks for the video, very interesting 👍.
how could that two metals fuse into each other?
Different metals
Gostaria de ver o modelo da má quina e o valor ou uma loja de vendas no Brasil
Бред. Какашки ещё коровьи с козьими сварить можно попробовать🤔
Se ve genial y simple...buena herramienta para mi taller.
Я когдато собирал авиамодельный реактивный двигатель ,вот тогда мне бы эту сварку.
Хоть бы когти подстрик!)
😂😂😂😂
Он орёл
@@РамзанИсаев-з8ы Только не то что летает ,а тот что горы обсирает.)))
Когти для отбивания шлака😀
Это TIG-сварка с малой частотой импульса. Есть подобные ювелирные аппараты, но здесь сила тока, думаю, 130-150 ампер, а в ювелирных - 30-50, способных варить лишь совсем небольшие элементы.
пипец пока посмотрел зайцев нахватался
will you please specify the machine and the technology you are using in this video?
Ela queima a peça é já faz a junção da peça. Interessante. 🇧🇷
Você sabe qual o nome dessa máquina de solda?
Как называется такое чудесное изобретение? Наверное засекреченное?
Guys got Parkinson’s or something man 😂
Isso é solda Tig (tungstênio, inert, gás).
Não tem nada de solda a frio. Concentra um feixe de plasma de altíssima temperatura na ponta do eletrodo de tungstênio, sob a proteção de gás argônio puro. Um sistema Tig sai em torno de R$2500,00, o preço pode variar conforme marca/modelo. No Mercado Livre tem.
Valeu irmão boa explicação !
Ela solda em profundidade ? Só vi solda rasa....
It's 16 years i weld copper and stainless steel together with a simple tig welder, no problem at all...
Yes, but you have SKILLS... The average rice eater making 9cents an hr with no bathroom breaks doesn't. I could teach my dog to run one of these. Big question is how strong are these welds and what kind of penetration are they actually getting?
@@jagboy69 talking about transition welding (i call them in that way) these are mainly used in research area, there are no mechanical sresses to withstand, however it is a full penetrating welding that made a good yoint.
It's not my skill, they fuse together by themselves.. 😂😂😂😂
@@alec-s I tig weld myself but really suck at stainless. I wonder if we could up the power to around 500amps if something like this could blast thicker stuff together? This thing is slow as hell, but could be easily automated. I could then drink beer and watch it work.
@@jagboy69 stainless steel is a bad conductor of heat, so to weld it well you need low amperage, because the heat generated by the arc won't flow away easily, resulting in an easy going welding basin.
If you melt copper and stainless together you just have to keep in mind to give more heat towards the copper while welding..... As you do when welding joints with very different thickness...
What you have to weld with 500amps?
I just needed that amp twice when welding big alluminium disc 30mm thick 1 m diameter..... But it's easyer if preheating the metal by oxyacethylene flame...
@@alec-s Interesting... I've tried low amps and it's just resulted in a more heat put into the part because of my wayy slower travel speed. This caused really black and cooked welds. Justin on the fabricator series suggest higher amps, faster travel speed and this results in less heat. What do you suggest for .125" stainless butt weld as a starting point for amps? I'm willing to try anything at this point. Thanks!
Just wanna ask if what kind of machine is used on this video.
Где купить эту сварки и сколько стоить
Это Аргоннодугавая сварка ,режим микро тек.
@@user-sw7vi7pq3o Добрый день. можно модели таких аппаратов написать.
@@Master.of.the.Negroes я так понял это на переменном токе?на постоянном так не получится?
@@Master.of.the.Negroes спс завтра попробую.
@@Master.of.the.Negroes Благодарю за ответ
can this be used if you have a Heart Peacemaker
I thought cold welding is done in a vacuum or under pressure. This doesn't look cold.
It's called cold welding because unlike the standard Tig process where the arc is constant and a puddle of molten metal is moved, this process only makes what I can only describe as tiny instant puddles that don't get "dragged" along the metal
exogator It’s literally just spot welding. Most tig welders can do this. This is not referred to as cold welding and never will be. This is using electrical energy to melt the two metals and fuse them. Cold welding occurs when there is not heat or fusion being introduced. It has only ever been found to happen in space or controlled nano vacuum environments.
Why didn't they explain the process? What welder was used and what settings?
exogator It is a spot welder
@michael timmer steel can also be welded with AC
Como hago para consequir esa herramienta
Сдраствуте какая цена и где можно купить
Необходимо купить машину, пожалуйста, обратитесь в WhatsApp для получения подробной информации: 86 18156331680 или по электронной почте: 2379277542@qq.com
Холодной сварки, говориш? Шутник.)))
Полтос ТИГ стоит, можно и дешевле найти, и 3 в 1
Looks like short quick burst of a tig. Saw it done before.
Damn I want one of these
Обычный современный апарат с импульсным режимом. Кого хотел удивить?
Чего стоит сия машинка?
Недешево. Аргонно-дуговая сварка. И не холодная.
За 9000$ видел
@@tv2.055 упсс,понял!
Я извеняюсь конечно НО... Помоему это просто аргонка, то бишь TIG. Импульсный режим для прихватки , хитрый автор взял держак за керамический колпак и .... о чудо "Новый аппарат холодной сварки может сваривать железные трубы с медными"
Так то оно даже газовой сваркой можно медь со сталью сварить а уж аргонкой то.....
На сколько ж хватило ума электро дуговую TIG сварку с вольфрамовым электродом назвать холодной!? Я пробовал на работе ради прикола полуавтоматом в среде аргона сварить алюминевой проволокой стальную пластину с алюминивой. И сварил!даже шов не плохой вышел. Но только прочности никакой! И куча пор в нутри шва когда разломил. Но слепить слепил...! По технологии медь сваривают в среде азота....!
А это обыкновенная электродуговая сварка не плавящимся электродом, а не холодная как выразился автор для лохов!
подскажи как настроить ТИГ сварку под работу как на видео ? что там накрутить - алюминь не варит уменя
@@Fan-gz5he без аргона не сваришь алюминий.