HOW TO STRING DOUBLE-HEADED WEED EATERS

Winding STRING DOUBLE-HEADED WEED EATERS is a simple process, but it can be a bit tricky if you're not familiar with the steps. To start, you'll need to purchase the correct type of trimmer line for your trimmer head, as different models require different types of string.
Once you have the right trimmer line, remove the cap from the trimmer head and locate the spool inside. Unwind any old string that is still on the spool, and clean out any debris or grass clippings that may have accumulated inside.
Next, cut a length of trimmer line that is appropriate for your trimmer head. Most trimmer heads require around 10-15 feet of line. Look for the line-feeding arrows on the spool, and follow them to determine which direction to wind the line.
Insert the end of the line into the hole on the spool, and begin winding it in the direction indicated by the arrows. Be sure to wind the line tightly and evenly, and keep it as level as possible on the spool to prevent tangles.
Once you have wound the line around the spool, leave a few inches of line free and tuck them into the notches on the spool. Then, replace the cap on the trimmer head and tighten it securely.
With the new line in place, your trimmer is ready to tackle your yard work with ease. Be sure to keep extra trimmer line on hand, as it can wear down quickly when in use, and may need to be replaced frequently.

[@kjell-akeapell3285]

I,ve successfully destroyed a trimmer,when I tried to change the cable !😂

🤣how that

[@justusblanco6259]

😂. FROM SPAIN

[@brunoagenhen7743]

@@kjell-akeapell3285 bonjour Madame Monsieur je souhaiterais publier un commentaire et quelques photos comment faire ???

[@jurijschiggyn9064]

how bro xD

[@lloydm2883]

So far best instructions on how to replace a two cable spool. Well done.

Thanx

[@perelozano5525]

Si pero siempre muestran cabezal enorme deberían ensenar cabezal para 2 milímetros que no tiene nada que ver con este

[@MrXcrt]

You know I’m late to the party but Geez I straight up missed the train on this one , wish I knew this 30+ yrs ago !!!! Thank you

[@memminotodini1007]

c'è chi ancora non lo sa fare.

[@jean-claude7258]

Et c'est bien ainsi,
Et c'est mieux comme ça.

[@Fbiking40]

I made one by one and it wasn't easy.
Now, I know the right technic !
Merci beaucoup !!!!
👍👍👍👍👍👍👍👍👍👍👏👏

🙂

[@patrickgo5004]

This solved my problem, and I am grateful for posting this vid. Ty

[@Marg205]

Thank the Lord! It’s not only the best video it’s the only one I have found that tells how to do a double bump with no arrows or holes!!!! Thank You

Thank you for watching

[@ninafrancuzevica4561]

Thank you for this video! It's not just a time but also a life saver 😅💪

[@rebeccastarovich6079]

Thank you! You helped us figure it out.

[@tonymontana4270]

Not even use a word
God bless my men

[@jamest3552]

Good, right to the point, and bonus western quick draw music to boot.

[@moose5.9]

Dude thank you so much lol. I ain't retarded but I was like uhhhh...and there is ZERO instructions in the manual. Been forever since I've threaded a head, I used a separate head for the longest time that didn't thread like normal

Yes. There are many types of heads and coils. BR🙂

[@stevew3947]

The fact they don't put this in the instructions manuals is infuriating and downright moronic

[@jean-claude7258]

Chez les humains il existe aussi beaucoup de têtes différentes, mais tu peux toutes les enfiler de la même manière....

[@jean-claude7258]

Et t'as pas besoin de manuel..

[@jurijschiggyn9064]

Díkec... je více způsobu a já hledal přesně tento .. :)

[@eddieholden8988]

Song is a banger

[@Truckersreloadingbench]

Nice! Finally able to restring. Thanks!

Thank you for watching

[@catwaklbed9217]

Thank you so perfect exactly what I needed!!!! You utter gem!!! ❤

[@guillaumepaquet5116]

You saved my marriage

🤣

[@casaMariaPT]

You didn't say whether that was a good thing or a bad thing

[@JFomo]

Straight to the point! Excellent video.

[@leegill7837]

Best video i found. Thank u ❤

[@nelubanesi3343]

Ce frumos explicat și arătat , foarte simplu de pus acel fir , eu merg pe fir de oțel , și este ok 🙋

[@jawnlaughlin5]

Nice edit!

[@bogdankarpinski4515]

Nigdy sznurka nie nawijałem,tylko żyłkę.😅😅😅

[@Marg205]

Change the title to how to string double headed weed eaters. Everything on UA-cam about Hyper Tough weed eaters only explains about single strings. I accidentally found this good video.

I listened to you and changed the title. Thanks for watching.

[@Sky-Lan3]

What’s the song?

[@treadhead]

WELL DONE & SPOT ON ,
THANKS FOR THE VIDEO !!!!!!!!!

Thank you for waching🙂

[@BSS22193]

Thank you so much for this video! 👍 Now i understand how i should do this on my trimmer if its the same method on all trimmers? By the way, what's the song called?

Song is from AI, and yes, theres are many diferent ways.

[@Neilhouse5]

This was the video that helped me finally get it right

[@Speedy9797-]

Thanks! Makes it so simple

[@albertoquintanaescalante4688]

Sin una palabra pero bien claro 👍🏽

[@Baum1000]

Hat er fein gemacht.😅😅

[@barbelvolzke5453]

Thanks!!!!

[@user-vy4gl3nc5d]

Bruh that’s so much faster. Thanks so much🙏🙏🙏

[@thierrycouffinhal6961]

Depuis le temps que je le faisait mal ! Merci !

[@virginiagonzalez3044]

Thanks for such an easy short video. Helped put jaja.

[@josejose-td7ni]

Thank you so much!!!
It was very stressful.
Not any more

[@williamcarl4200]

Once upon a time...before bump heads...stringing was easy and one manually advanced the string. Today, I remove the cutter and manually advance the string. I have learned nothing...

[@seanvillegas9442]

Appreciate the video. Thank you!

[@lakedog3616]

Wonder what is the biggest diameter line that would work in this trimmer ?

I think 1.3mm

[@jessepoe6488]

thank you

[@user-fn9cs4dv8r]

thank you sir, you saved me so much time!

[@Wishitwasnttrue.]

Your a wizard 🧙‍♂️ harry !

[@burtonabel2419]

Did you cut the notch in the center rib?

No, the notch already exists.

[@bQLStudio]

Thank you

[@stevebowman421]

Excellent video

[@emiliopucci9208]

Bravo. chissà se ci riuscirò. non ho manualità.

[@arturderb-engel7202]

Wieder etwas gelernt, danke !

Thank you for waching

[@chrissaprano2834]

Thank you!

[@robbrenton9438]

Great line music 👏

[@azmgbbb]

I did it 😅 Thank you so much

[@Leon-ki5uj]

Très bien montré😊😊

[@dawwall1225]

👍👍👍 Merci pour se bon rappel bien utile✅ 🤝👋

Thank you for watching

[@abaddon0932]

Oh my God thank you so much. I felt dumb for not knowing 😂

[@simsational...]

Thanks, you just saved me hours

[@AlexC80]

Husqvarna heads are the best
Hate stihl ones
I put a t35 universal on my stihl fs110. Works really good

[@jean-claude7258]

Moi je déteste les gens qui déteste et qui ne savent pas pourquoi ils détestent, c'est juste pour faire leurs intéressants,
Ca se trouve ils n'ont jamais eu une tête rotofils dans les mains.

[@natkemp-tousant4211]

Winding line on THAT trimmer head lots of different kinds and ways

Yes, crazy

[@yankis.]

Keeps flying out...

[@DamonMUSICCo]

Wrap it tighter

[@melissasmolinski6389]

So satisfying,

[@kangsodchannel2210]

Belinya dimana

[@marekziokowski6107]

Łał to mi nowość

[@kokopeds8588]

thanks

[@giovanellosiriacoherrero]

ocupa 1 modificación,x ke la bobina del enrrollado suelta el nylon cuando el bottón recibe algún golpe😢,y atraza el trabajo😮

[@frasercrone3838]

That is one type of head unit, what about all the others?

You have video on channel with 2 diferent types

[@jules-bz5vc]

Thanks a lot . I got mine 2nd hand and didn't know how to load a double. Thanks to you, know I do!

[@user-kk3nc5od8b]

After watching this video I think I know how to do it now because after I string that it started using it that a line kept on coming out without bumping it only Allah videos did not tell you nothing besides this one

[@Summerfairy81]

Omg tyvm

[@GlenHyden]

Has anyone had the bump actually work?

[@tobeywitak47]

Can someone please tell me why the string of my string trimmer keeps coming off and also it all goes all the way in as well !??

You may have lost the spring inside🙂

[@mshum538]

@12 feet of line ?

[@LukasHartl-ei2od]

Nic novýho

[@pawwir]

Nie sznurke tylko żyłkę

[@Youtubeparolee]

T35 trimmer line for dummies.

[@nonorobo]

merci

[@pascalboucher8215]

Merci, c'est vrai que c'est galère, mais Il faut trouver une autre solution pour les coupes bordures, on répand du plastique partout

Thank you for waching

[@modoverkill7066]

So that’s how you do it… huh

[@ax4jarmory664]

What is the song?

AI

AI

[@ax4jarmory664]

Any chance that you can upload the song please? Thank you!

[@bollockchops]

Thought it was commonly known

[@g.j.2204]

To jest film ,,Jak nie nawijać linki do koszenia na bęben"

[@faustodefendenti6888]

Ci voleva un genio per capire come avvolgere il filo?

Many peoples dont know😜

[@faustodefendenti6888]

Nobody teached me how to load the wire.
I loaded this wire on a few type of sistem.

[@marcincarbonbike1746]

Husqvarna😊

[@bialywoj71]

Co to jest "sznurka"?

What is zmurka?

[@zeljkoljiljak1984]

Tako ja namotavam strunu na glavu od Denzel trimera,Stihl malo drugačije

Zalosno da postoji ko zna koliko vrsta, isto ka i punjaca za mob prije.

[@zeljkoljiljak1984]

Imam tri trimera Denzel,vilager,stihl svi drugačije glave

[@Ben-ve2fp]

Pluh 🗣️

[@miroslav1964]

PAN MAREK PEKNY SLNECNY DEN 🇨🇿🤝🇸🇰

[@aaronjcarpenter-uv7xi]

Pluhh

[@dowtingtomas.695]

Danke sehr!!!!👉🍻🍻🍻

[@dozw112]

Следующее видео будет... Как подойти к триммеру...

Hahhaah, thank you🙂

[@dozw112]

🤝

[@soltroy7928]

И что? Все 15 метров намотал? 😂😂😂

3 max

[@Orlando_63s]

👍🏼

[@PYGARGUE95]

J'ai un enrouleur automatique.

[@Unmaleable]

Just get a speed feed head lmao

[@user-xo2yi7wx8o]

Храни Господь этого мужчину!!!! Спасибо!!!!

[@jean-claude7258]

Qu'est-ce que Dieu vient faire la dedans ???

[@starwalkerone4496]

Mahalo

[@Cello69.]

Kind of unrelated question but how on earth can they charge tax on rain water drainage.

Simple🙂

[@kytsunman8592]

Sweet video, but man get some better string. Life is too short for bullshit trimmer string lol

[@ivankrmpotic3022]

Lako je na husqarni namotat

[@MR-zh9cb]

das weis jeder der mit Freischneidern zu tun hat,.

[@shukcubi8760]

Ho vent'anni che lo lo uso 😂

[@gunreble1683]

Gibt schon längst bessere Fadenköpfe die man nicht zerlegen muss zum Faden nachfüllen.

[@andreyshelest2408]

Ума хватило!

[@user-gn4ql5ll6g]

Сенсей, епта

[@davidinnis6796]

Throw it in the garbage & buy a speed feed head. Thank me later.

[@ruggeheilsam1802]

.....falscher Faden......

[@user-nj7sm3tu4p]

Катушка морально устарела у меня ничего разбирать не надо

[@jean-claude7258]

Peut-être,,,,
Mais elle fonctionne,,,,
Elle.