If you guys had been in that "Flight of the Phoenix" movie, they would have never made it home safely. But morale would have been higher. Great work! Keep it coming!
Imagine what a showstopper it would be if both halves were joined together in some way, then flip a switch on the transmitter then both halves separate in flight one goes left the other goes right and both carry on flying, just imagine the shock and the oohs and ah's of a crowed of people when they separate.
Imagine the shock when you turn on the news to see 3 dead and many injured because a plane separated in half and crashed into a crowed of Ooing people…
Build a Bi-Plane out of a mono-plane kit and separate in flight the smaller of the 2 wings. The CG will probably need moving, in flight, which would be the easy part, and the plane should continue to fly, and land safely with probably some additional speed. This is all theory, but I am a retired Engineer, and a real pilot from 1978. Good Luck! Interesting problem!
I know this is probably impossible in practice, but imagine putting really strong magnets on the missing halves of the planes and making them re-connect mid flight
Another fun video😂 My Twimber split into many halves when the elevator servo horn snapped. How about an electromagnetic coupling to allow the Twim and the Ber to separate and then rejoin in flight??? 🤓🤣
Thank you SO MUCH for providing an HONEST review. I was seriously considering this plane as the next addition to my hangar. I've only met one person who has one, and they fly like old people drive, barely moving, so of course he loves it. I'll be passing on this plane, thanks to your detailed review. Thanks again!
This channels content is the funniest and maybe the most interest of it's kind since you guys took the leash off of it. Would like to see it go up as one aircraft inly to separate then kamakzi both. Cheers fellars love ya work👏👏👍
Hmmmm..........Now I wonder if an old kit I have that is half built will fly? You guys are on the edge, of what I am not sure, but on the edge. Keep it up, can't wait for the next one.
Hey, i designed a 3d printed system that can hold those two halves very well and release them in flight. and it's almost weightless. you should try it.
A guy I used to fly with tried this years ago and got it working pretty well. He had the two planes joined with some super strong magnets so they could take off as one, split, then rejoin for landing(if both pilots could fly close and steady enough lol)
Can we conclude that? 1. Half a Twinber results in exponential worse control 2. Half a Twinber results in exponential more fun 3. Two half Twinbers flying in formation ì😊😊s AWESOME¹⁰
That is awesome! I'm truly impressed you got it er them to fly at all. I like the Idea of putting them together and then separating them in midair. I'd also like to see you add a random section of wing (from some crashed plane or other project) in between the two haves P38 style. If that's not strange enough for you, put the two halves back together wing tip to wingtip. I think I'd remove the about 6's from both wing tips.
This video was so great I didn't watch it in 2x speed. 🤣 I'd like to see this attached together by something like a few servos. See you guys take off and fly a few laps with dual pilot cooperation and then separate mid-air. I don't see it going well which is the point and our entertainment. Might not be a good idea. That video might be too short. 😄
in the time span it took me to watch this video 9:57 it started with 20 views. when i was done it was at 650.......how are 525 people watching this faster then minutes move..... it is now 700 and only took me 10 seconds to type this out
Don't know what you should do with the remaining halves but keep that attitude up! Screw the system, screw the concepts of traditional aerodynamics and keep the chimeras coming - whenever you feel the need!
This is maybe your funniest video yet! You should glue them back together and revisit the "two pilots one plane" idea you did when you taped the two cubs together. Great content and great flying! 😁
Haha awesome, so did they sell, I see the listing says sold now , if not I definitely vote try to re attach them dual control take off then split in air somehow
Loved this one. Awesome you guys got them to fly!! Definitely need a few more flights then maybe test their durability with a full throttle dive into the ground 😂
A rough landing with my control line Sig Banshee damaged the right (outboard) wing. Thought I fixed it with some Hot Stuff. A flight or two later, pulling out of a vertical 8, the wing departed. The plane stayed in the air! But, some control line speed planes were asymmetrical, having only the inboard wing.
Idk, it flies better than a lot of those tail-heavy planes we see waffling around on UA-cam, and that makes me wonder how it would fly if you put back half of the steel nose blob.
this'd make for an interesting challenge video thingy saw a plane in half give each half to a builder person within a time limit, make it work fly eachother's planes, see who did better
very yes must add locking servo to join them fly normal and separate them mid air just before emanate impact flying full speed at your hovering camera drone ... please ... thank you
So how would it fly if the outboard landing gear was removed? I suspect the weight of that gear had something to do with lateral balance of the airframe.
Ive been waiting on this video!! ever since he showed the lil sneak peak of the half timber while back i looked thru all the videos thinking maybe i missed it or maybe tailheavy gave up on the half plane idea or maybe it just didnt fly. My twin timber is also in two pieces just not perfectly down the center lmao
The hype was so high on this video and it did a great justice. Great editting, great script and amazing videography. @Tail heavy Productions Heart this video if you're gonna buy another twimber or if you like toy airplanes =)
I appreciate the all the uranus jokes as much as the next guy, but scientists changed the name of that silly plant a year ago. It was changed to your rectum.
The problem with your asymmetrical aircraft is that the moment of inertia is highly coupled. That Ixy term inherently couples your roll and pitch responses which makes it extremely unintuitive to fly, even if it’s “stable” in the traditional sense.
Now we are getting back to the content that made you guys famous. Frankenstein builds! Here is the next challenge for you guys. Build a Twin Habu jet by fusing the wings together. It could be side by side like the twin mustang or top and bottom like a biplane. 2 planes must use one receiver and one battery to control both planes. And GO....
I would be stoked to see the two halves mated and separate in flight. Both landing on their own. Sick idea
You stole my idea.
Agreed!
Yeah like with magnets so it locks on
Like a 007 movie.😊
we did it in 2021 :ua-cam.com/video/SvWCEdgOxiM/v-deo.html
If you guys had been in that "Flight of the Phoenix" movie, they would have never made it home safely. But morale would have been higher. Great work! Keep it coming!
Lmao
I've been waiting for more than a week for this one.
Imagine what a showstopper it would be if both halves were joined together in some way, then flip a switch on the transmitter then both halves separate in flight one goes left the other goes right and both carry on flying, just imagine the shock and the oohs and ah's of a crowed of people when they separate.
Imagine the shock of having a crowd of people available to ooh and ah...
Imagine the shock when you turn on the news to see 3 dead and many injured because a plane separated in half and crashed into a crowed of Ooing people…
@@maxbouchard2241just give the crowd some tennis rackets.
Build a Bi-Plane out of a mono-plane kit and separate in flight the smaller of the 2 wings. The CG will probably need moving, in flight, which would be the easy part, and the plane should continue to fly, and land safely with probably some additional speed. This is all theory, but I am a retired Engineer, and a real pilot from 1978. Good Luck! Interesting problem!
'Starving children in Africa could have eaten it' .....😂
Mam I need a airplane
These two flew so well that I am embarrassed about the stuff I build that doesn't fly.
the description of how this thing flies is on point
Great commentary as usual! Clever and funny!
Blohm and Voss would be proud of you guys.
I know this is probably impossible in practice, but imagine putting really strong magnets on the missing halves of the planes and making them re-connect mid flight
no way i was about to comment that
Love it!! Thanks for delivering fun and laughs at the expense of your suffering & frustrations!! You Guys are awesome!! ✌
Another fun video😂 My Twimber split into many halves when the elevator servo horn snapped. How about an electromagnetic coupling to allow the Twim and the Ber to separate and then rejoin in flight??? 🤓🤣
I'm very impressed that they put in the hard work to finish this project - and it actually worked.
So nice to have you guys and thnx to Jon(TwoBrothers) for recommending this channel!
This is what happens when you cast dark necromantic rituals over a pile of polystyrene trash.
Thank you SO MUCH for providing an HONEST review. I was seriously considering this plane as the next addition to my hangar. I've only met one person who has one, and they fly like old people drive, barely moving, so of course he loves it. I'll be passing on this plane, thanks to your detailed review. Thanks again!
This channels content is the funniest and maybe the most interest of it's kind since you guys took the leash off of it. Would like to see it go up as one aircraft inly to separate then kamakzi both. Cheers fellars love ya work👏👏👍
Loved it!! hahah lot's of good one liners in here. Great engineering TH!
Join the wings together with the bodies on each side of the wing.... like a reverse twin turbo?
5:13 that’s the face that reads: I’ve done good things or, this gonna be a good internet meme.
I think it must evolve into a good old Trimotor!
Hmmmm..........Now I wonder if an old kit I have that is half built will fly? You guys are on the edge, of what I am not sure, but on the edge. Keep it up, can't wait for the next one.
You guys should make a bush flying plank
Such a fun video! Keep them coming!
The most impressive thing in this video is at 58 seconds you somehow got a grinder to make sparks fly out of them Styrofoam plain my head hurts
Hey, i designed a 3d printed system that can hold those two halves very well and release them in flight. and it's almost weightless. you should try it.
Electromagnets, anyone?
You could put a few weak magnets on them and a servo to push them apart in the air. That would be fun
I have no idea how I got here, but the whole vid was incredibly rad.
A guy I used to fly with tried this years ago and got it working pretty well. He had the two planes joined with some super strong magnets so they could take off as one, split, then rejoin for landing(if both pilots could fly close and steady enough lol)
The x files music with the t28 wing and gear was my favorite part 😂
"dumbass technology" had me dying
Wow..I'm glade I watched your video..
My next plane I was going to buy was the Turbo Timber Twin....NOT NOW...
"I bet it's another Timber, a Timber with 4 motors, a Timber with 8 EDFs"
The Timber:
Can we conclude that?
1. Half a Twinber results in exponential worse control
2. Half a Twinber results in exponential more fun
3. Two half Twinbers flying in formation ì😊😊s AWESOME¹⁰
Art
I felt like you were getting somewhere with flying both of them in formation. Bring the halves a little closer and it's back to one airplane!
Noooooo!! My beloved twinber!! Im kidding lol, great video.
That is awesome! I'm truly impressed you got it er them to fly at all.
I like the Idea of putting them together and then separating them in midair. I'd also like to see you add a random section of wing (from some crashed plane or other project) in between the two haves P38 style. If that's not strange enough for you, put the two halves back together wing tip to wingtip. I think I'd remove the about 6's from both wing tips.
The gravitational pull of uranus -tail heavy productions 2023
The gravitational pull of Uranus!!!! Hilarious!
This video was so great I didn't watch it in 2x speed. 🤣
I'd like to see this attached together by something like a few servos. See you guys take off and fly a few laps with dual pilot cooperation and then separate mid-air. I don't see it going well which is the point and our entertainment. Might not be a good idea. That video might be too short. 😄
You should use magnets and stick them together for takeoff and then split in flight!
Nice addition of the HQ prop btw
Definitely didnt think they would fly that good. ha
in the time span it took me to watch this video 9:57 it started with 20 views. when i was done it was at 650.......how are 525 people watching this faster then minutes move..... it is now 700 and only took me 10 seconds to type this out
Hands down the BEST video ever and wit jokes are sublime
*magnets. Connect them in flight.
You and Cody have way too much fun 🤣 super enjoyable watch
1:47 😂
Good bye to rolling moment
Don't know what you should do with the remaining halves but keep that attitude up!
Screw the system, screw the concepts of traditional aerodynamics and keep the chimeras coming - whenever you feel the need!
Fly outside the box! 📦✈
WEE WAAANT GAAAASSEEERRRRSSSSSSS⛽️🔥🔥🔥🔥
This is maybe your funniest video yet! You should glue them back together and revisit the "two pilots one plane" idea you did when you taped the two cubs together.
Great content and great flying! 😁
Haha awesome, so did they sell, I see the listing says sold now , if not I definitely vote try to re attach them dual control take off then split in air somehow
A challenging docking manoeuvre that would be.
That was a fun project!
thats a great video man, love it
Well done
Loved this one. Awesome you guys got them to fly!! Definitely need a few more flights then maybe test their durability with a full throttle dive into the ground 😂
When they are airborne, you can almost hear the halves whispering: "kill me".
Ahh super trooper references 😅
AWESOME.
$20 if you cut a quadcopter in half and make it fly.
I wonder if you could hover with the tail facing upwards using reverse thrust?
Separate in mid air!😂
Real
Yes seperate in flight🥳
I've got a delta wing that has been crashed and rebuilt so many times, amazed it's still symmetrical 🤣🤣🤣
Yes! separation I'm mid air!
Classic!
A rough landing with my control line Sig Banshee damaged the right (outboard) wing. Thought I fixed it with some Hot Stuff. A flight or two later, pulling out of a vertical 8, the wing departed. The plane stayed in the air! But, some control line speed planes were asymmetrical, having only the inboard wing.
lets now try putting both half's together with Velcro, taking off from the ground and then splitting them apart in the air while in flight...lol
m.ua-cam.com/video/SvWCEdgOxiM/v-deo.html
That‘s so Cool😂😂😂 love from Germany
I saw this on discord thanks for the video
Great experiment. But that’s a waste of time doing a mitosis on a bad plane 😂
Idk, it flies better than a lot of those tail-heavy planes we see waffling around on UA-cam, and that makes me wonder how it would fly if you put back half of the steel nose blob.
THIS is a straight 'FYou' to Horror-izon sloppy if I've seen it!!!!
😂😂😂👍😂👍👍👍
you should try putting a flight controller in it and look if it can make it fly morr like a normal plane
Put magnets on each half and join them in the air. 👀 let them heal and be one again, the perfect Timber.
kool video enjoyed it
I am crying I'm laughing so hard about the descriptions once you guys got it flying. Aaaaand rewind..
this'd make for an interesting challenge video thingy
saw a plane in half
give each half to a builder person
within a time limit, make it work
fly eachother's planes, see who did better
Finally!!!
3:12 I gotta say I'm tired of being the butt of all jokes, regards, your friendly neighbor planet Uranus
I say Join them wingtip to wingtip like the stratolaunch or add la few carbon tubes between the fuselages and try to make it fly
Awesome!-
very yes must add locking servo to join them fly normal and separate them mid air just before emanate impact flying full speed at your hovering camera drone ... please ... thank you
So how would it fly if the outboard landing gear was removed? I suspect the weight of that gear had something to do with lateral balance of the airframe.
If the weight of the gear and battery weren’t at the wingtip there’d be massive problems
Ive been waiting on this video!! ever since he showed the lil sneak peak of the half timber while back i looked thru all the videos thinking maybe i missed it or maybe tailheavy gave up on the half plane idea or maybe it just didnt fly. My twin timber is also in two pieces just not perfectly down the center lmao
A wheel you can barely notice ? where did you put it ?
Too funny :-) and your voice-over script is excellent as always!
The hype was so high on this video and it did a great justice. Great editting, great script and amazing videography. @Tail heavy Productions Heart this video if you're gonna buy another twimber or if you like toy airplanes =)
Go 'Hawks!!!!
This was a half-baked idea. And, no, I won't cut them some slack.
@@ernie5229 😂 You’re right. It was an idea split in HALF. 😝
How about a servo system to hook both half’s together. Then take off and fire the servo to separate them that would be a show!!
I appreciate the all the uranus jokes as much as the next guy, but scientists changed the name of that silly plant a year ago. It was changed to your rectum.
All of the rc crack heads coming back for their fix 😂😭✌🏼 HAHAHAH
Can ya get'em to tow two or more gliders off the deck with some mid-wing expanded re-join? Or do some glider or mailbag snatch up mid-hook wench line?
The problem with your asymmetrical aircraft is that the moment of inertia is highly coupled. That Ixy term inherently couples your roll and pitch responses which makes it extremely unintuitive to fly, even if it’s “stable” in the traditional sense.
Magnets on each side and try to join them midair
Wauw. Two advanced trainers 😅
PS. Your script writing is on par with your flying. Both are perfection of a skill.
Now we are getting back to the content that made you guys famous. Frankenstein builds! Here is the next challenge for you guys. Build a Twin Habu jet by fusing the wings together. It could be side by side like the twin mustang or top and bottom like a biplane. 2 planes must use one receiver and one battery to control both planes. And GO....