How To Change 2021 Hyundai Elantra Headlights To LED ( NEW DAILY)

Поділитися
Вставка
  • Опубліковано 10 вер 2024
  • Tearing into the new daily driver 2021 Hyundai Elantra, updating the stock headlights to Led's.
    Super easy install had to be the first things to change.
    This is the Beginning for the new daily driver on the channel.
    Follow the New INSTAGRAM @dannygzk
    For channel updates.
    Bulbs used: SEALIGHT Scoparc 9005/HB3 LED Headlights Bulb, High Beam LED Bulb, 9145/H10 Fog Light Bulbs, 6000K Bright White, Halogen Replacement, Quick Installation www.amazon.ca/...

КОМЕНТАРІ • 159

  • @MegaHollywood1971
    @MegaHollywood1971 2 роки тому +22

    Very SOLID Install! I've seen numerous others take off the entire bumper and housings just to do it. You did it flawlessly! Nice work 👍

  • @vijaysinghero
    @vijaysinghero Рік тому +8

    Let me tell you the driver's side was the most challenging for me! My hand could barely fit in that little space. I highly recommend taking your time and don't panic if it takes you multiple tries to finish this task. 🙌🏽

  • @sambennet8651
    @sambennet8651 2 роки тому +4

    pure talent here to record with one hand and use the other to do the work

  • @EN_autoblog
    @EN_autoblog 2 роки тому +7

    Awesome vid man. I was hoping that wouldn't have to remove the bumper. Thanks again. Going to do mines soon.

  • @neilb2477
    @neilb2477 2 роки тому +10

    Is it one bulb which includes the highbeam? or two separate bulbs. The yellow bulbs are awful at night... my only complaint.

    • @Lessontobe
      @Lessontobe Рік тому +4

      I have had the car for a month and ironically have to drive a long way to work in a rural area in the middles of the night. The halogen lights are terrible.

    • @yaboibababoey834
      @yaboibababoey834 Рік тому +4

      It’s one bulb. It’s a projector so there is a shutter that covers half of the tunnel the light comes through, then the shutter lifts up when you activate the high beam to allow more light.

  • @marcusdeshazor2078
    @marcusdeshazor2078 2 роки тому +12

    I’m struggling to actually disconnect the wiring harness. When you say push forward then pull down how exactly do you mean?

    • @FernandoGranco
      @FernandoGranco Рік тому +2

      The "lock" is on the harness itself, its similar to those clicky pens that unlock using a side button, so it you put your finger in between the lock and the body of the lamp, and push down, so its basically "out and down"

  • @harman7270
    @harman7270 10 місяців тому +1

    Just did it couple of minutes ago. Thanks for the help brother 🔥

  • @alexcross3286
    @alexcross3286 2 роки тому +4

    Hopefully I’ll get this done successfully. It’s bad enough they put halogen bulbs in a 2021 car, but then they have to make it as tight as possible to reach to change the bulbs

  • @arczi.p5217
    @arczi.p5217 2 роки тому +5

    Hi ! I see you installed this led headlights bulbs 1 year ago ! Can you tell me if they are still working or already replaced! Thank you

  • @julianabarnhart1437
    @julianabarnhart1437 3 місяці тому

    Great detailed explanation of what to feel for! I got it from this video

  • @nathancollins712
    @nathancollins712 2 роки тому +2

    Go through the wheel well is the easiest way

  • @lunabird89
    @lunabird89 2 місяці тому

    Hey my front signal light blew . What kind of bulb does 2021 Elantra take

  • @colpitts350
    @colpitts350 2 роки тому +1

    Hello from New Brunswick. I have the same car same trim. Loving the manual transmission. Thinking of doing this same upgrade.

  • @2greenedout864
    @2greenedout864 Місяць тому

    If you can’t take them off just take the whole bumper off made everything so much easier for me

  • @scotthudson1000
    @scotthudson1000 Рік тому

    Thanks I did all my interior lights from your videos. All worked great except one map light . I pushed too hard and the housing is behind the plastic. Hyundai said its a warranty thing so that works. Headlights arrive in a few days. Again thanks

  • @dapbubba
    @dapbubba 2 роки тому +2

    Thank you so much for doing the video. Very helpful and plan to do the swap later today.

    • @ClubAmerica92
      @ClubAmerica92 2 роки тому

      How did the swap go? Any suggestions?

    • @dapbubba
      @dapbubba 2 роки тому +1

      @@ClubAmerica92
      Very good. Just followed the video. Order parts from Amazon. Just be patient when replacing. Note, recommend adjusting lens angle after doing it. Good luck.

  • @Marc05761
    @Marc05761 2 місяці тому

    Last step.. mine does not click . Yes I have the right bulb and same car . I don’t hear the click

  • @dhrumitpatel1555
    @dhrumitpatel1555 2 роки тому +2

    I wanted to know that if i change the headlight bulbs than my warranty will be voidable or not ?

  • @sezy4093
    @sezy4093 Рік тому

    Thanks for the help dude! When I got to work on changing my headlights I discovered that I had a Bigfoot hand size, so I think I am going to have to remove the bumper to do it ;( tough life man

  • @Jack.Yi.
    @Jack.Yi. 10 місяців тому

    Hello, thanks for nice instructions. Today, I put one side in and I have a question. When I turned on light for 10 seconds, the whole SEALIGHT Scoparc 9005 bulb(bulb, box) is extremely hot, so I was scared and hold on to put in otherside. Is this normal and safe? LED bulb + wire + black unit together in the small box with cap would not cool down heat from LED.

  • @visualtantrumz7895
    @visualtantrumz7895 4 місяці тому

    was wondering if anyone knows why my left side daytime running lights won't turn on?

  • @erinlorraine1402
    @erinlorraine1402 6 місяців тому

    Thank you for your video!! Seriously, THANK YOU!! 😊

  • @mylezjuco3048
    @mylezjuco3048 Рік тому +1

    I did it as shown in the video but it appears that one of the headlights aren't aligned properly. I don't remember if it was like that prior to installation, but I've confirmed that it's not a bulb issue since I w swapped them and the same side was still aimed lower. Is it possible to realign it myself and how would I do that?

    • @FernandoGranco
      @FernandoGranco Рік тому

      There is a grey "thingy" right next to the where the light goes, you can use a philips screwhead to change align

  • @victoraxieinfinity3417
    @victoraxieinfinity3417 5 місяців тому

    Bro my car same model no working the display , not turn on ,I check the fuse everything looking goods ,you have any details for this problem

  • @srupinderd
    @srupinderd 5 місяців тому

    what did you do to the headlights check signal ⚠️? Because I got this signal on the screen and it's annoying.

  • @redsox77377
    @redsox77377 2 роки тому +4

    Are these led headlights compatible with the 2021 Hyundai Elantra N Line and do these led lights cause any issues within the cars computer system.

  • @FerociousPancake888
    @FerociousPancake888 2 роки тому +2

    Oh gosh I just did this and it was awful. I used to work on cell sites and everything on the top of a tower is extremely compact so I was very good with my hands in super small spaces but this one killed me. Glad it’s done. (2023 Elantra SEL here)

    • @jamespan8027
      @jamespan8027 2 роки тому

      Hey man, I’m trying to twist out the original bulb but it will not twist out for me, am I doing something wrong?

    • @FerociousPancake888
      @FerociousPancake888 2 роки тому

      @@jamespan8027 It’s not a full screw out or anything, just a quarter turn if that. I honestly just fiddled with mine for 30 mins or so.

    • @GamingNarwhal
      @GamingNarwhal Рік тому

      Hey is their any error messages on your dash or no? Im making sure these work on my 2023 Elantra SEL

    • @FernandoGranco
      @FernandoGranco Рік тому

      @@GamingNarwhal It works on the 2023, no error code

    • @IronBran123
      @IronBran123 Рік тому

      @@FernandoGranco what about an N-Line?

  • @rudytrudel45
    @rudytrudel45 2 роки тому +1

    do you have issues where the high beam barely light up the road but the tip of the trees instead? - tried to adjust the height, but no luck so far

  • @XenoAgar
    @XenoAgar Рік тому

    i’m confused what i’m supposed to do after i unscrew the cover? like what am i grabbing on to to pull the old light out

  • @fatihkose2754
    @fatihkose2754 Рік тому +1

    Do you know if these lights are dot approved?

  • @Thegangsta00711
    @Thegangsta00711 2 роки тому

    Thanks for this video bro It helped a lot!

  • @jaxzian
    @jaxzian Рік тому

    So these led replacements dont through up error codes or anything like that? Also, do i need to position them a certain way so other drivers are not blinded, or does the projector headlight housing make it not matter?

  • @albertdroid9079
    @albertdroid9079 2 роки тому

    Thanks for tutorial, I was able to get the 2nd bulb to twist easier. Waiting for nighttime to check them out. && What did you do with the little rectangular piece attached to bulb, is it ok for it to just dangle in there or did you zip tie it to something. Maybe some double sided 3m tape would do?

  • @TheMrCRISTOF
    @TheMrCRISTOF Рік тому

    My left headlight looks odd and is giving me an error code at times. Any tips?

  • @MrAdrianionescumusic
    @MrAdrianionescumusic 2 роки тому +1

    Pls , put a link with the bulbs model . I tried to find on Amazon but I didn’t find this model bulbs . Thanks !

  • @lanesworld4000
    @lanesworld4000 2 роки тому +2

    Dude, you don't wear the gloves for disassembly. The glove is for handling the new bulb itself.

  • @jamesc5256
    @jamesc5256 2 роки тому

    I bought 2022 elantra hybrid is it same bulb type(9005/HB3) used?

  • @aditsharda8295
    @aditsharda8295 2 роки тому +4

    Hey, any tips on why I'm getting condensation inside both the headlights even though the dust caps are pretty tightly fit? I got the same bulbs in Toronto, and while they work really well, they won't seal.. Your help would be amazing..

    • @RubenTainoAI
      @RubenTainoAI Рік тому +2

      Replace the Silica Bag in the cap. It worked for me.

    • @taichiherov8135
      @taichiherov8135 9 місяців тому

      But condensation still builds up even after doing this

    • @AditSharda
      @AditSharda 4 місяці тому

      @@taichiherov8135 I reinstalled the bulbs, properly installing them in place the 2nd time. It's been 2 years, and there's no condensation anymore. I think there was a slight gap before, that I was able to get sealed up. Didn't need any silica bags.

  • @miamianz
    @miamianz Рік тому +1

    just got a 2023 SEL elantra do you actually have to buy the whole compartment or just the bulb ?

  • @Deltree74
    @Deltree74 2 роки тому +1

    Is there only one way for the bulb to sit in the housing? I have a feeling when I put them in, I forgot to lock them in place? Because the are king of pointing down and not straight. I just want to mention that I tried without removing the bumper, just with my hands and it’s pretty hard to see inside the housing that way…Did you have to twist them in after they were in the hole?

    • @FernandoGranco
      @FernandoGranco Рік тому

      You have to twist them in place, its a very small twist

  • @zekeo1522
    @zekeo1522 Рік тому

    Great tutorial! The drl on one side of my elantra are out. It's not the actual bulb you replaced in this video. It's the drl above that. I can't find the bulb to replace the drl! Do I need to replace the entire headlight for the drl to work again? Please help! Thank you!

    • @WilldaBear
      @WilldaBear Рік тому

      Warranty should cover that.

  • @davidyoung456
    @davidyoung456 2 роки тому

    Hi there, I’m having some serious trouble putting in one of the bulbs. The bulb on one side went in smoothly and was tight, but the other bulb is simply not getting set in place. It remains loose when I push it all the way in, and doesn’t respond to clockwise twisting. Could this be an issue with the bulb? It didn’t look any different than the first one I put in.

  • @micway71
    @micway71 2 роки тому +1

    Dan, when you put the LED light as shown, did it go into the desired 3 & 9 o’clock position without having to play with it, and looking at it from the front?

    • @FernandoGranco
      @FernandoGranco Рік тому

      It only fits this way, so you don't need to check it

  • @BabyAbarth
    @BabyAbarth 2 роки тому +1

    My hands can't fit where yours do unfortunately.. Can I not just remove the headlight to change out the headlight bulb?

    • @WilldaBear
      @WilldaBear 2 роки тому +1

      I've seen others turn the wheel completely and access the headlight compartment from underneath the fender.

    • @nathancollins712
      @nathancollins712 2 роки тому +1

      Going through the wheel well is the easiest

  • @Blankmomment92
    @Blankmomment92 Рік тому

    Bro i bought the same ones and on the street they seem hella dim are yours like that?

  • @horebcity
    @horebcity 8 місяців тому

    Did you have "check headlight" warning after installing these?

  • @govroomvroom
    @govroomvroom 8 місяців тому

    Do you get any "Check headlight" code when you installed them?

  • @Merrilsbank
    @Merrilsbank 4 місяці тому

    I wanna do this to mine but it looks so f difficult

  • @FernandoGranco
    @FernandoGranco Рік тому +1

    Thanks, just installed on the Elantra 2023 Prefered, it was exactly like the tutorial. How are the lights after one year?

    • @RevTheoryWPG
      @RevTheoryWPG Рік тому

      I literally just tried to do this on my 23 preferred Elantra and just couldn’t do it. I’ve got somewhat big hands so it’s almost impossible to do that driver side for me. Any tips?

    • @FernandoGranco
      @FernandoGranco Рік тому +1

      @@RevTheoryWPG I got some good scratches on my wrist at the drivers side, but my hand could fit all the way down there, I think the best to do is to get someone with smaller hands to help 🥲

    • @RevTheoryWPG
      @RevTheoryWPG Рік тому +1

      @@FernandoGranco i managed to get the LED bulb in, but because of how tight the area is I could t for the life of me twist it into place. I think I’m just gonna take the front wheels off and the wheel liners. I’ve seen lots of people doing it that way

    • @FernandoGranco
      @FernandoGranco Рік тому

      @@RevTheoryWPG This side is awful, check to make sure you are putting it with the tabs on the right place, check the ones you took out to see the right way. I had more trouble twisting out the one that came with the car than the new one 😄

  • @DiscLBY
    @DiscLBY 2 роки тому

    Will these lights fit 2023 Elantra Hybrid Blue?

  • @mohammedafzalhossain6394
    @mohammedafzalhossain6394 Рік тому

    i put my car and now just coming check headlights now how to i fixed

  • @antoniofrancisco3018
    @antoniofrancisco3018 3 місяці тому

    Pls show us tue product next time,nerded to see if it needed an anti flicker device which most ppl say it is not necessary

  • @TSB1408
    @TSB1408 2 роки тому

    Do the lights have to be adjusted ?

  • @JEWHOBO
    @JEWHOBO 2 роки тому

    how do you disconnect the wiring harness what do you mean by push forward and pull?

    • @DANNYGZK
      @DANNYGZK  2 роки тому +2

      Push down on the tab on back of the light and pull out

  • @Enrique_Dt
    @Enrique_Dt 6 місяців тому

    Muchas gracias lo pude lograr te agradezco muchísimo

  • @nabaddame5726
    @nabaddame5726 2 роки тому

    Is this the same for 2022 Elantra or did the bulbs change? Can't find much on Google.

  • @Mr.Worf63
    @Mr.Worf63 2 роки тому

    Check out Precision LED for an in interior package for your car . I’ve used them since 2016 . 2016 Elantra GT. Good video 👍🇨🇦

  • @dennycannon8410
    @dennycannon8410 2 роки тому +1

    Is this for both the high and low beam?

  • @mikem5759
    @mikem5759 7 місяців тому

    Show the passenger side smart guy

  • @richieyuukyou
    @richieyuukyou 2 роки тому

    so instead of a nasty yellow it’s a bright white? I need

  • @ttibsen82
    @ttibsen82 Рік тому

    You must have the tiniest hands in the world.

  • @deathman9236
    @deathman9236 2 роки тому

    its fit on ioniq ?

  • @baobaluza2823
    @baobaluza2823 2 роки тому

    It doesn't work for my 2022 Elantra SE

  • @circlecitychamp317
    @circlecitychamp317 2 роки тому +2

    Now I imagine this would work for my ‘22, but Amazon says these do not fit.

    • @Duskrr
      @Duskrr 2 роки тому

      That’s what I’m trying to figure out, I have the 22 also

    • @qkrwlduf
      @qkrwlduf 2 роки тому

      Have you guys figured this out yet? XD

    • @grahambradshaw6590
      @grahambradshaw6590 2 роки тому +3

      It works, I just installed them on my '22 SEL

    • @joshuaanderson2336
      @joshuaanderson2336 2 роки тому

      @@grahambradshaw6590 have they thrown any codes or “check headlights”? I have a 22 as well

    • @Edwin-xs3fb
      @Edwin-xs3fb 2 роки тому

      @@grahambradshaw6590 yeah how is it now that it’s been 1 month? Also do you know the name of the bulb??

  • @jamiebalidiong7491
    @jamiebalidiong7491 Рік тому

    is it hi/low function the one you replaced ?

  • @adamsharabi7728
    @adamsharabi7728 2 роки тому +1

    i keep getting check headlight warning

  • @Edwin-xs3fb
    @Edwin-xs3fb 2 роки тому +1

    Idk if it was there before but when I change from low beams to high beams it makes a noise…. Is that normal???

    • @DANNYGZK
      @DANNYGZK  2 роки тому +3

      Mine does the same thing noticed after but couldn’t remember from before

    • @LegendSlayer30000
      @LegendSlayer30000 2 роки тому +1

      Its prob from fans of the leds. Leds usually come with mini fans attached to help cool them down while on. Since led is working harder since high beams are on it requires more energy in turn, it heats up faster so fans move faster to dissipate the heat so thats prob the noise u hear

    • @LegendSlayer30000
      @LegendSlayer30000 2 роки тому

      @@jamesmoon3345 ahh okay yeah could simply be how it is. My leds make noise & they come factory from hyundai . I have a sonata n line

    • @hasantugkanbilginar9755
      @hasantugkanbilginar9755 10 місяців тому

      Mine does the same thing noticed after I changed. Did you go to the mechanic to check everything okey, or that is just normal sound when you change to high beams ?

  • @youling1997
    @youling1997 2 роки тому

    Does the stock bulb have one or two filaments?

    • @FernandoGranco
      @FernandoGranco Рік тому

      One, but its the low and high in the same bulb

  • @theman_himself
    @theman_himself 3 роки тому +2

    Did you install the led headlight for high beams as well?

    • @eddrafter
      @eddrafter 3 роки тому +8

      One bulb does both . . .

  • @sadsad9609
    @sadsad9609 2 роки тому

    Hey bro i just followed what you did they fit turn on but the lights are so weak :(

    • @Edwin-xs3fb
      @Edwin-xs3fb 2 роки тому

      For the Elantra too!??

    • @Edwin-xs3fb
      @Edwin-xs3fb 2 роки тому

      I just changed mine out but it’s day time right now so idk how well they work… I hope it’s worth it 😩😩 I spent so much time on this

  • @MOJUNKIE89
    @MOJUNKIE89 3 роки тому

    Hi! Can you PLEASE give a link for which lights you used for this upgrade.

  • @mc-ri2zp
    @mc-ri2zp 2 роки тому

    Hey is it possible to show where the leveler is ? I have a dead spot after I installed my LEDs

    • @WilldaBear
      @WilldaBear 2 роки тому +2

      It's a gray circular funnel. Can't miss it.

    • @mc-ri2zp
      @mc-ri2zp 2 роки тому +1

      @@WilldaBear BRUH it was in my face the whole time 🤣 thanks man i’ll try that tonight

    • @WilldaBear
      @WilldaBear 2 роки тому

      @@mc-ri2zp No problem, I had the same issue.

  • @johnmarston3583
    @johnmarston3583 2 роки тому +1

    Hey bro can you humbly also do the led tail/trunk lights? You’d get a shit ton of views I’ve seen so many people requesting that vid on other peoples channels and reddit etc.

    • @DANNYGZK
      @DANNYGZK  2 роки тому +2

      I have a bunch of led’s on order should be here in a few days upgrading everything

  • @sahilchaudhary2154
    @sahilchaudhary2154 3 роки тому

    From where did you order the led lights?

  • @BillLAnthony
    @BillLAnthony 2 роки тому

    So I just got a 2022 SEL 3 days ago, tint done today too. Does anyone flash their brights at ya when the low beams are on? Just ordered some today. I'm over halogens. Didn't splurge on the Limited like my other half. 😂

    • @scottstewart9786
      @scottstewart9786 2 роки тому

      Funny because my other half got the limited in black and I got the SEL in red. How did changing the bulbs go for you

  • @MasterofPuppetts0
    @MasterofPuppetts0 2 роки тому +2

    FFS, nice going Hyundai, we dont all have tiny Korean hands 🤬

  • @turkiyecumhuriyetim.k.a9086
    @turkiyecumhuriyetim.k.a9086 3 роки тому +1

    👍 süper

  • @barackputin
    @barackputin 2 роки тому

    5:01 no pun intended

  • @kyawlinhtoo
    @kyawlinhtoo 3 роки тому

    Links for the bulbs?

    • @DANNYGZK
      @DANNYGZK  3 роки тому

      SEALIGHT Scoparc 9005/HB3 LED Headlights Bulb, High Beam LED Bulb, 9145/H10 Fog Light Bulbs, 6000K Bright White, Halogen Replacement, Quick Installation www.amazon.ca/dp/B079KB8J98/ref=cm_sw_r_cp_api_glt_i_2P6GTTX767KWY1VBN8AH?_encoding=UTF8&psc=1

    • @kyawlinhtoo
      @kyawlinhtoo 3 роки тому

      @@DANNYGZK this is for low beam? How about high beam

    • @DANNYGZK
      @DANNYGZK  3 роки тому +1

      @@kyawlinhtoo low and high in same bulb

    • @redtarectecan7921
      @redtarectecan7921 2 роки тому

      Any plans on upgrading the turn signals??

    • @nayazekhan6031
      @nayazekhan6031 2 роки тому

      @@DANNYGZK when I follow the link to Amazon, it says it does not fit my 2021 Elantra?

  • @GoatsVagina
    @GoatsVagina Рік тому

    The dealership said installing these would void the warranty on the assembly. They said they get too hot but I wasn't really sure it was true. Do they get hot? Seems like that's a really old led problem in cars

    • @Lessontobe
      @Lessontobe Рік тому

      I think LED's run cooler than halogen but I could be wrong. You should investigate this random dealership statement!

    • @jaxzian
      @jaxzian Рік тому

      @@Lessontobe the lights themselves run cooler that halogen, however, led run way hotter at the connection. so if you get led they need a heatsink or it will damage things.

  • @gerardomartinez1016
    @gerardomartinez1016 Рік тому +1

    Does the auto headlight feature still work when switching to LED lights?