great hinge Vince. these are so handy...you could use them on lots of things...doors, bifold gates, normal gates, flaps, shutters, and even rv hob covers ( heavy duty ones..you know the sort :)
I’m supposed to make a hinge for articulated jewelry and this helped me understand what to do and where, with what lol we only get a 10 min vague in-class demonstration, and that was 1 week ago so I need a refresher thanks so much!! You use those big boy toys though, but I get the idea lol
Deliciousness Yumyum glad it helped you . If you need any other type of hinge just message me . I’m sure I can show you various way of making them . They aren’t complicated ,,they just take some thinking . Thanks for stopping in 👍
Huey Lionsheart a heavy small hinge like that would set me back about 10 bucks each here if you can find one for your application . Often I can’t ,so I just make them . This one is simple and not terribly accurate because of pin slop ,but if I need it to be I just make lift off types and turn the pin on the lathe to about .040
I hear you mate. I bought some 'fairly heavy duty hinges' for a job a couple of years ago and they cost me £15 for two, only to have to nut and bolt one a few months ago because the pivot rusted and dropped out on it. I'm thinking when they need attention again I might just use a solution like this. I saw Robert make some heavy duty ones which I liked too...so I guess that should have made me think about it sooner. :)
That's work well mate. Now I'll tell you of an easier way to make a hinge. Nut and bolt. Weld nut to bench, or the static bit. Weld the folding bit to the bolt. Yes if you have 2 make sure they face the same way.
NICE hinge that should do the trick proper beefy, funny I did not see a Bee in the drawing until you said that then it was all I could see from that point on. :)
Normal metal supplier . Can’t recall the size at this time but measure the id of your pipe or tubing and size the pin accordingly. A few thou play works fine
Bagot Corner I don’t like the snoring either. If only I could mute you,so far though I can only fast forward. I did like the train whistle though at 0:28.
great hinge Vince. these are so handy...you could use them on lots of things...doors, bifold gates, normal gates, flaps, shutters, and even rv hob covers ( heavy duty ones..you know the sort :)
Talented people you welders. Great job and enjoyed watching you make this hinge.
super solid hinge heavy duty forsure thumbs up and shared
DriveShaft Drew thanks Drew and thanks for swinging by 👍😊
Very good video.
I’m supposed to make a hinge for articulated jewelry and this helped me understand what to do and where, with what lol we only get a 10 min vague in-class demonstration, and that was 1 week ago so I need a refresher thanks so much!! You use those big boy toys though, but I get the idea lol
Deliciousness Yumyum glad it helped you .
If you need any other type of hinge just message me .
I’m sure I can show you various way of making them .
They aren’t complicated ,,they just take some thinking .
Thanks for stopping in 👍
Well done.
Nice, simple hinge that stores often charge exorbitant prices for. Nice Bike lift and great upload 👍
Huey Lionsheart a heavy small hinge like that would set me back about 10 bucks each here if you can find one for your application .
Often I can’t ,so I just make them .
This one is simple and not terribly accurate because of pin slop ,but if I need it to be I just make lift off types and turn the pin on the lathe to about .040
I hear you mate. I bought some 'fairly heavy duty hinges' for a job a couple of years ago and they cost me £15 for two, only to have to nut and bolt one a few months ago because the pivot rusted and dropped out on it. I'm thinking when they need attention again I might just use a solution like this. I saw Robert make some heavy duty ones which I liked too...so I guess that should have made me think about it sooner. :)
That's work well mate. Now I'll tell you of an easier way to make a hinge. Nut and bolt. Weld nut to bench, or the static bit. Weld the folding bit to the bolt. Yes if you have 2 make sure they face the same way.
MalcOfLincoln lol I know that way 👍
Thanks buddy 😊
NICE hinge that should do the trick proper beefy, funny I did not see a Bee in the drawing until you said that then it was all I could see from that point on. :)
MidwestMotoRider lol and now when I look at it it reminds me of a satellite floating above the earth !
Oh great now that is what I see, and I can't unsee it thanks!
great job
That it? thought you were showing us how you were extending it lol :P
Nice hinge Nephew.
lol
Great video once I'd skipped all the waffle :) many thanks
SimpleAs Liam thanks for stopping by 😊👍
Seems you and Robert made 'heavy metal' hinges. You could could name it the bumble bee which doesn't suppose to be able to fly.
Jason Andrews.... would these have worked for the RV cover???
Kim T no ,, I only just invented them
Kim...do you mean a "heavy duty" RV cover?..if so then yes these would just about hold the weight of one of those :)
jason andrews Very heavy duty, I had to get a new vehicle to pull the RV since adding the stove cover
Where do you get the tube? Very thick wall
Normal metal supplier .
Can’t recall the size at this time but measure the id of your pipe or tubing and size the pin accordingly.
A few thou play works fine
great vid - but just one question - where's herman?
paulcam67 lol thanks buddy ,he’s actually away for a bit working on his rental house
Wear globes brother
Bruh where the sound
UA-cam yanked it
You need gloves my Friends
Oscar NMontenegro nah I’m tougher than you might think , but thanks 🙏
Why are you speaking? Couldn’t make it to the end....
Kim T better then snoring no ? 💤
Bagot Corner I don’t like the snoring either. If only I could mute you,so far though I can only fast forward.
I did like the train whistle though at 0:28.
I put the audio in a loop that puts me to sleep each night. Ahhhhhhhh dulcet Vinman tones. !!!!! Good night moon
hahahahaha