Craft a DIY Metal Hinge Bender Following My Simple Tutorial
Вставка
- Опубліковано 28 вер 2024
- Do you need to bend metal hinges but don't have the right tools? Making DIY benders can be a game changer. This homemade hinge bender tutorial walks you through a simple way to make your own metal bending tool on a budget.
In this video, I show you how to make a DIY bender specifically for bending metal hinges. It's easy to make at home with basic supplies and requires no welding or power tools. All you need is some simple tools I’m going to tell you about in the video!.
I provide a step-by-step tutorial that shows you exactly how to construct the bender so you can make your own in no time. I also demonstrate how to properly use the bender so you can start bending hinges for doors, gates, and other projects. No need to keep struggling with inadequate tools - this homemade hinge bender gets the job done!
This DIY bender is designed to be highly adjustable so you can customize it to your specific metal bending needs. I show simple modifications you can make to upgrade its leverage and capacity.
This DIY metal bending project is perfect for hobbyists, DIYers, and anyone who works with metal and needs an affordable solution for bending hinges. The full tutorial teaches you everything you need to know. Check out the video now to learn how to make your own metal hinge bender!
Liking and subscribing lets me know you enjoy these tutorials and want to see more DIY! It only takes a second but means the world.
#hingeBender
#DIYTools
#WireCrafts
#diyideas
#MetalBender
Excellent job good looking hinges.
Waw..bikin engsel sangt bagus 👍🤝 indonesia 🇮🇩
Very nice, thanks for sharing.
Facil y eficiente ,excelente
Hi thx for a very informative vid. ❤❤
Buen trabajo pero yo protegería mejor mis manos al trabajar con chapa y taladro es facil que la broca se trabe y provoque una lesion en dedos mano
I love the simplicity of this die and process: Angle grinder, drill press, hammer, and bench vice. Welder is not strictly needed.
No se observa, pero antes de doblar la pieza se debe lubricar.
Show!!!
better to buy
🇮🇹🇮🇹👍
Очень классно, но купить наверное будет всё же дешевле.
Подскажите, где купить такую матрицу?
@@roman_le я имел ввиду, что проще купить готовые петли.
@@kapa6776 Если вы живете где-нибудь в США - то, пожалуй, да. Там приличный выбор разных типов и размеров.
@@roman_le да ладно... я не знаю как у вас в городе, у нас вполне свободно практически в одном магазине можно купить петли любых размеров, начиная от маленьких для шкатулок ,кончая кованными для амбарных ворот.
@@kapa6776 Если нужны "какие угодно, примерно подходящие по размеру" - то да. А если у вас авторское изделие и вы хотите, к примеру, латунные петли вместо жестяных - то очень сомневаюсь.
Next step: make your own wood screws
Great work here. I'm not comparing but, in the following video, I like the way he folds the hinges: ua-cam.com/video/BvK3Dsvgk_g/v-deo.html
Hadir nyimak boss ku suksesselalu buatbossku 👍👍👍
Measure with micrometer, cut with angle grinder.
10like untuk temanku ini...video keren😎
Q alizadonos ferro. Nããã
Volta...
For light-duty hinges, ready -cut, I reckon the metal leaves from a dismantled transformer core could be used (the thin stacked pieces each shaped like E or similar)
How did you make the round surface to start the bend? Angle grinder? Very impressive.
A very simple and wonderful idea for you
Nice and easy idea bro 👍
Very good just needs some hardening to be preventing it from bending and broken.
Thank you poor man can do with less tools
แจ๋วเลยครับ👍👍👍
😅😅
Perfectly made door hinge👍👍👍
Eu gostei muito sobre mim daqui de Recife
That song rocks!!!!
Muy bien, pero ya las venden hechas!🤷♂️
بس كم الريشة الذي خزق الفرمة
Well I thought that was clever, good job..........
👍👍👍luar biasa. Mantab. ( Indonesia)
tu l acheter c est moins cher
I would have 3D printed the dies. You can reinforce them with sheet metal pieces if needed. Way easier than carving a solid steel block
Takes to long
@@tannerlane9669 Hmm well it depends. While my printing is working I can do something else in the meantime. Also ich can print multiple iteration with quick changes, in the end when I am happy with the result I can still cut it out. It´s way more messy.
@@sierraecho884 printing parts is cute for small projects & demonstrations but I’m talking a bit more heavy duty , that little electroplated pla plastic would last maybe 1 day😂
@@tannerlane9669 That´s why i´s called rapid prototyping, you create 1-5 prototypes until you get the geometry and all the parameters right, cheap and quick and if you like the result you can still carve it into steel. Also depending on the amount of parts needed you can use and break your prototypes and simply print new ones. If you only need 3 parts or so this is not an issue at all. Sometimes I only needed 2 parts I printed out some tools used them and threw them away, I still have the 3D file but I don´t the stuff lying around here where it takes place, if I need a new one I just print one out. As I said, it depends on multiple parameters and personal preference. Many times it is more economical to simply print out some parts.
@@sierraecho884 Sir I literally just sumed everything up, that’s why I would use steel instead of 3D print, no need for a test run, plastic vs steel no comparison
💙❤Nice and Hard Work❤💗💜
The sander almost worked. 🤣🤣🤣
Congratulation from Brazil!!👏👏👏
hello sr mujhe phon nabar do
jadi insfirasi
Cool, but...
Metal hinges are cheap enough to buy at the local hardware store that it's not worth my time and effort, materials and tooling to fabricate them myself.
I agree same thoughts here wasting time when you can buy them cheap made in China😁😁😁
Maybe you need something right now. Maybe what you need isn't available or is really expensive. Maybe you just like making things from scratch.
very. usefull
Glad you think so!
Todo bien pero no usa guantes
벤딩기 철사 1.0mm 2.0mm
caliper is not for scracing
Goodworuksir
👌❤️❤️❤️
Deberías colocar las medidas de los cortes
Stainless steel material
А если тоже самое только петли бабочки
ञञञञ
good 👍
Gret
Why?
Спасибо за видео. Россия.
best so far
💯
VERY GOOD WORK
👍👌👏👏👏👏
brilliant, just brilliant.
What is the angle grinder attachment at 5:20?
It is just a angle grinder sandpaper attachment (LOL) It screwed over the cutting disc
Perfeito parabéns
Nota 10 belissima ideia obrigado pela aula
do you sale them