If I’m installing the RELX base does the blue line on the car seat need to be level at the end? How many degrees off of perfectly level are acceptable? Making it perfectly level is very difficult.
My pipa does not leg and it does not have a rebound bar neither. Branded as Klik, it is not even seen on the corporate website. So my version is not protected agains the backward/forward rotation then?
Hi there, it is not possible to use the PIPA urbn on a base. It delivers a secure installation in seconds using an integrated ISOFIX system and does not require a base. Best wishes, Maya from Nuna
Hello Kayla, thank you for your message! The PIPA series doesn't have a recline position. However, in connection with the RELX base, you have 4 recline positions. Have a nice day! Mary from Nuna
Hello Maung, thank you for your message! Please refer to the car's user manual or ask the manufacturer to find the LATCH points, in order to be 100% sure. Best wishes, Mary from Nuna
Hello Laura! Thank you for your message :) The PIPA rx is also compatible with the PIPA base. Let us know if you have any other question, you can also follow us on Instagram and send us a DM. Have a nice day! Mary from Nuna
After the base has been installed using ISOFIX, can the load leg be.... sort of... loose? I mean, in my case - it sits on the car floor, but the front of the base can be lifted a bit together with the leg. Is this OK?
Hi there! Thank you for your message. If your base is installed correctly, the load leg moves if you are lifting the base at the opposite end from the latch or belt path. The location to check for movement is ONLY at the path where the belt or latch connects the base to the vehicle. There should be no left to right OR up and down motion greater than an inch at the belt path or Isofix (rigid latch). You can always contact our US customer service team to review if you would like to send us a picture or you can also contact a local car seat technician to review the installation with you if you are unsure about the installation. Best wishes, Mary from Nuna
When I use the recline adjustment block on the pipa base my bubble indicator is in the middle of the line instead of touching the line. Is that okay? Thanks
Hi TJay! That's ok, the bubble just has to touch the line so if the bubble is in the center of that line it is still touching and it is good. Best wishes, Mary from Nuna
i guess Im randomly asking but does any of you know a tool to get back into an instagram account..? I was dumb forgot the login password. I would appreciate any tricks you can offer me.
@Marley Gus Thanks for your reply. I found the site on google and I'm in the hacking process atm. I see it takes a while so I will reply here later with my results.
For the 1-2 recline position, how do I know which one to use? Please specify 😢
If I’m installing the RELX base does the blue line on the car seat need to be level at the end? How many degrees off of perfectly level are acceptable? Making it perfectly level is very difficult.
Is the Nuna next 360 iso fix base not sold in the US?
Just installed mine and it also makes a loud rattle noise any time I drive over any rough road patches
Same it's so annoying and Luna gives no response to all the comments about this
My pipa does not leg and it does not have a rebound bar neither. Branded as Klik, it is not even seen on the corporate website. So my version is not protected agains the backward/forward rotation then?
Does the Pipa urbn have a car seat base?
Hi there, it is not possible to use the PIPA urbn on a base. It delivers a secure installation in seconds using an integrated ISOFIX system and does not require a base. Best wishes, Maya from Nuna
Should an all weather mat be removed when installing the RELX base leg load? Or, is it safe with the all weather mats?
Can I purchase the combination of the Nuna PIPA Lite LX with the RELAX Base? They are compatible correct?
Yes! Our RELX base is compatible with our entire line of infant car seats in the PIPA series.
@@Nuna-Baby thank you! Is there a way that I can purchase the PIPA Lite LX and have it come with a RELAX Base instead of the regular base?
How to you change the recline angle as baby grows in the pipa series?
Hello Kayla, thank you for your message! The PIPA series doesn't have a recline position. However, in connection with the RELX base, you have 4 recline positions. Have a nice day! Mary from Nuna
Does Nuna intend to bring the Arra to the US or to offer a near lie-flat Pipa option?
Hello Jaenbow, thank you for your message! Kindly follow @nuna_usa on Instagram to follow all product news! Have a nice day, Mary from Nuna
Do US cars have the latch system? I could not find them on my newly purchased crv.
Hello Maung, thank you for your message! Please refer to the car's user manual or ask the manufacturer to find the LATCH points, in order to be 100% sure. Best wishes, Mary from Nuna
Can you buy the original Nuna Base as second option for the Nuna RX?
Hello Laura! Thank you for your message :) The PIPA rx is also compatible with the PIPA base. Let us know if you have any other question, you can also follow us on Instagram and send us a DM. Have a nice day! Mary from Nuna
After the base has been installed using ISOFIX, can the load leg be.... sort of... loose? I mean, in my case - it sits on the car floor, but the front of the base can be lifted a bit together with the leg. Is this OK?
Hi there! Thank you for your message. If your base is installed correctly, the load leg moves if you are lifting the base at the opposite end from the latch or belt path. The location to check for movement is ONLY at the path where the belt or latch connects the base to the vehicle. There should be no left to right OR up and down motion greater than an inch at the belt path or Isofix (rigid latch). You can always contact our US customer service team to review if you would like to send us a picture or you can also contact a local car seat technician to review the installation with you if you are unsure about the installation. Best wishes, Mary from Nuna
My Pipa car seat base that I recently bought looks different. Mine does not have the stability leg neither the balance bubble bars. Is it normal?
Hello Jaehyeok, thank you for your message! May we ask where are you based? 🌎 and exactly which base did you buy? Thanks :) Mary from Nuna
When I use the recline adjustment block on the pipa base my bubble indicator is in the middle of the line instead of touching the line. Is that okay? Thanks
Hi TJay! That's ok, the bubble just has to touch the line so if the bubble is in the center of that line it is still touching and it is good. Best wishes, Mary from Nuna
i guess Im randomly asking but does any of you know a tool to get back into an instagram account..?
I was dumb forgot the login password. I would appreciate any tricks you can offer me.
@Elian Leo instablaster :)
@Marley Gus Thanks for your reply. I found the site on google and I'm in the hacking process atm.
I see it takes a while so I will reply here later with my results.
@Marley Gus It worked and I finally got access to my account again. Im so happy!
Thank you so much, you saved my ass!
My nuna base always moves the front leg....always...IT SUCKSSSS... a lot, is very expensive and it doesn't works how supose to work.. bad 👎