Odyssey Harmonic Balancer Pulley Replacement Honda 2005, 2006, 2007, 2008, 2009
Вставка
- Опубліковано 5 лип 2023
- Harmonic Balancer Replacement Pulley
amzn.to/46yGH7z
Pulley Bolt Removal Tool Set
amzn.to/3O314RZ
Long handle Rachet
amzn.to/3pMHMYF
Car Jack
amzn.to/3pCY9qK
Trim Removal Kit
amzn.to/3JOuO3x
Join Amazon Prime
amzn.to/48ImDzK - Авто та транспорт
After changing crank shaft pully on my 2014 crv I noticed much better downshifts, its an important maintenance item!
For sure! Thanks for watching!
Great video. Direct , ti the point. Helpfull insights. Much better than some of these clowns making videos with heavy background noise and no explanations. Good job. Im definitely subscribing to this gals videos.
I appreciate that!
Thanks for the info, and the tool links.
Hope it's helpful! Good luck!
Thank you so much sister
You are most welcome! I hope it helps!
oh and you forgot the Ingersoll Rand w7152 zipped it right out first try no spray nothing ... through this is this...nice video thanks
The Ingersoll rand?? Is that an impact or something? No, my husband was able to break it using a cheater pipe.
What are the tools that you used?
I give an overview of the tools at 0:48 There are also links in the description to parts and tools needed.
Why jack up on the sub frame?
I'm an amateur mechanic. If you have advice to make things safer or better I'm always open to it.
Great video!
Thank you! I hope it was helpful!
So loosen the bolt I have to pull towards the front not going left?
You are still going lefty loosey. I'm pulling to the right bc it's at the bottom of the circle. If my ratchet was straight up it would be going left. Does that make sense? I'm not sure how to describe it better lol but it is left.
@@Sara_The_Feral_Housewife thank you
@@chrisbennyblancogonzalez9119 No problem! Good luck! That bolt can be quite difficult.
@@Sara_The_Feral_Housewife yeah I’m having difficulty but I think i gotta get the adapter for the 19mm socket
@@chrisbennyblancogonzalez9119 if you jack it up your van more you may be able to slide a cheater pipe over your breaker bar to get more leverage. You also can get it off with an impact if you have a decent sized one or an air impact.
never trust a parking brake I have seen so many fail always use wheel chocks
Absolutely agree
This pulley bolt is not as ease to remove as this video shows. The torque on this bolt is over 180 foot pounds . I question validity of this video.
The validity? Like I didn't actually replace it? 😂 I did and it was a pain in the butt let me tell you. Luckily my husband is a hulk and broke it loose. We did it exactly like I showed in the video using a rachet to hit the metal and a breaker bar pulled towards the front. If you're weak just say that.
To put it back on, was there a certain troque for it? It did you Hulk it back on? Lol