Great video and instructions! Love your videos no matter what it is about. How do you get the red and green arch lines and keep them perfectly an inch apart? Are they digitized? Thank you!
The Emboidery looks fresh fresh excellent work. A couple of notes comparing the Wilcom layout with the finished emboidery. In Wilcom you went to a lot of trouble to get the space between the words centered on the seam. On the finished hat it looked like the word Threads started on the seam. The other thing is your base line in Wilcom was directly on the top edge of the hem of the hat and the sew out was 1/4"-3/8" above that. Is that a Ricoma thing where it shifts the file image? The results look great however, some of the trouble you went to, didn't seem to manifest in the end. Cheers Howard Halifax Nova Scotia Canada
Hello and thank you for the great observation. The center of my design is right where the tail of the T begins, thats right on the seam. And I did raise the letters a tad bit up and thats why I have a 1/8" space from the trace line.
Which embroidery software do you use and do you think it is beginner user friendly? I think you mentioned Wilcom but I’m confused when I go to their website because there are several options. Also is hatch and welcome the same? I have a ricoma MT 1501 and have chroma and embrilliance right now.
Hello, I am currently using Wilcom 4.5 Embroidery Studio Designing. I was using Hatch 2 for a long time, which is real good and user friendly but I transitioned to provide digitizing service and teaching classes so I made the jump to a more professional and more feature software. Hatch is part of Wilcom but its way cheaper and super user friendly. Most all software is the same process its just some softwares have different features to make the process faster.
@@RomeroThreads thanks! So when you say teaching classes are you referring to UA-cam videos or do you have other classes. I would really like to talk to you about that.
I am planning on doing both youtubes and paid classes. Its all in the planning stages but I should have the classes up and running in a couple of weeks. You can contact me at 4everromero@gmail.com if you have any questions about the classes, thanks.
Awesome video! Can you provide a link to thr Facebook page? I just embroidered my 2nd hat 🧢 today on my single needle NQ1600E with a curve and didn’t come out 100%, but it was a good try. This template would help immensely.
Excellento stitch and clean too. Well done!
Great, as always! Thanks!
Romero Thank you for your services.. Wow thats awesome
I appreciate that
Is this on the google drive?
Good video thanks
Great video and instructions! Love your videos no matter what it is about. How do you get the red and green arch lines and keep them perfectly an inch apart? Are they digitized? Thank you!
Thank you! The red and green lines, I create them in Adobe Illustrator then I transfer the picture to my digitizing software.
Hello, great video! What hoop are you using ?
Thanks, the hoop is: Hooptech Clamp for Cap Backs
Can you show how you created the curved lines in Photoshop?
where do you get that hoop its capable for the MT1501 ? is it just for the back of the caps only ?
Is the Hooping device for the cap back an additional device you purchased. Does this come with the Gen2, or is it an additional device needed?
Yes its a different device needed.
Where do you get the hoop for doing the cap back? and who makes them
Here’s the info on the hoops: www.hooptechproducts.com/product/back-of-caps/
Always great videos. Can you share the dad hats supplier you recommended?
Thank you, I get my hats at SS Activewear. www.ssactivewear.com
The Emboidery looks fresh fresh excellent work. A couple of notes comparing the Wilcom layout with the finished emboidery. In Wilcom you went to a lot of trouble to get the space between the words centered on the seam. On the finished hat it looked like the word Threads started on the seam. The other thing is your base line in Wilcom was directly on the top edge of the hem of the hat and the sew out was 1/4"-3/8" above that. Is that a Ricoma thing where it shifts the file image? The results look great however, some of the trouble you went to, didn't seem to manifest in the end. Cheers Howard Halifax Nova Scotia Canada
Hello and thank you for the great observation. The center of my design is right where the tail of the T begins, thats right on the seam. And I did raise the letters a tad bit up and thats why I have a 1/8" space from the trace line.
Which embroidery software do you use and do you think it is beginner user friendly? I think you mentioned Wilcom but I’m confused when I go to their website because there are several options. Also is hatch and welcome the same? I have a ricoma MT 1501 and have chroma and embrilliance right now.
Hello, I am currently using Wilcom 4.5 Embroidery Studio Designing.
I was using Hatch 2 for a long time, which is real good and user friendly but I transitioned to provide digitizing service and teaching classes so I made the jump to a more professional and more feature software. Hatch is part of Wilcom but its way cheaper and super user friendly. Most all software is the same process its just some softwares have different features to make the process faster.
@@RomeroThreads thanks! So when you say teaching classes are you referring to UA-cam videos or do you have other classes. I would really like to talk to you about that.
I am planning on doing both youtubes and paid classes. Its all in the planning stages but I should have the classes up and running in a couple of weeks. You can contact me at 4everromero@gmail.com if you have any questions about the classes, thanks.
Awesome video! Can you provide a link to thr Facebook page? I just embroidered my 2nd hat 🧢 today on my single needle NQ1600E with a curve and didn’t come out 100%, but it was a good try. This template would help immensely.
Thanks!! Here's the link, I added it on the description also.
business.facebook.com/RomeroThreads
@@RomeroThreads thank you! I must’ve scrolled too fast in the description box 😉
hallo please add the template
What Hats do you use? Where can I order those type of hats. Can you put the name of them.
I use the Yupoong dad hat. I'll put up links later. Any embroidery service request you can email me at 4everromero@gmail.com
Thanks.
How u do a counter trace
What machine do you have. On mine, its the stitch heart icon on the panel. (not the heart with the needle).
@@RomeroThreads found it