Saw this car in person in Valdosta sounds sick on UA-cam shit sounds deadly in person. Cars owner is hella cool gave me great advice on my 92 camaro ls3 build
Check out my channel. There's one idle video. I need to upload some more though, because I've made a few tune changes and it sounds much better now. Not to mention I need a good wide open throttle clip.
2nd SS that I've seen with TSP headers. This is going to be my summer project for my 13 LS3 SS. I will post some videos afterwards. Clean ride. Enjoy and drive safely.
whats dyno numbers? this is good for guys that dont really like taking rpm too high,i just like to baby ls3 cause poor lol but i dont get close to red line so is this more of a setup for guys like us? im in chicago wher u cant even get high rpm cause of traffic n lights
Brian Fructuoso no, but I’ve talked to several guys online and they’re running BTR stage 4s and Texas speed stage 4s with just the valvetrain upgrade package like the springs, rods, etc. it all comes in a kit. No head work required.
Just a few questions, what axle backs were on this Camaro and where can I go to find this camshaft? I already have TSP 1 7/8ths long tube headers with off-road x pipe
I just installed this same cam in a 2015 camaro, we are having a hell of a time getting it tuned properly.
Saw this car in person in Valdosta sounds sick on UA-cam shit sounds deadly in person. Cars owner is hella cool gave me great advice on my 92 camaro ls3 build
I'm running this cam in my G8, but on a 111 LSA. I love it! Great powerband! I'm just trying to tune it to chop a bit more.
Timothy Rose any video of your car with this cam
Check out my channel. There's one idle video. I need to upload some more though, because I've made a few tune changes and it sounds much better now. Not to mention I need a good wide open throttle clip.
It's about time TSP started to build their UA-cam channel... Welcome to 2016! lol
TexasGTO 👌👌👍👍👍😂😂😂
Texas Speed & Performance 👍
2nd SS that I've seen with TSP headers. This is going to be my summer project for my 13 LS3 SS. I will post some videos afterwards. Clean ride. Enjoy and drive safely.
I'm thinking about getting this cam for my 2005 Pontiac GTO M6 ls376 480HP swap. The Camaro sounds great.
Damn that was awesome !!
485hp/450tq with just a cam only?
how much total hp gain after cam, headers, and cai were installed. Sounds great looking to do this to my 1LE
Lookin in to the new stage 2 229/244 what do you think? Im looking a cam i can drive ok and not lot of buckin
whats dyno numbers? this is good for guys that dont really like taking rpm too high,i just like to baby ls3 cause poor lol but i dont get close to red line so is this more of a setup for guys like us? im in chicago wher u cant even get high rpm cause of traffic n lights
Is this your stage 2 LS3 cam?
What is drivability like at low rpm? Could I daily drive with this cam?
Found my cam for my camaro now just got to save for the dod delete
What's the idle rpm and spark correction tables like on this car?
I have a 2010 camaro SS what would I have to purchase with this kit in order for me to install it cleanly as possible and for it to sound like this
I want to add this set up to my G8 GT. I’m trying to see if it’s worth it & so far.... 🤩
Was it worth it?
I have ur 288/288 588/588 112lsa cam in my ls1 Gto would I need heads to get mine to sound more like this
What mufflers does it have? Or is it a muffler delete?
what's PTV clearance on an otherwise stock motor with this cam?
Do you have to do ported/upgraded heads to run this cam safely or is it just for additional gains?
Any info out of them?
Brian Fructuoso no, but I’ve talked to several guys online and they’re running BTR stage 4s and Texas speed stage 4s with just the valvetrain upgrade package like the springs, rods, etc. it all comes in a kit. No head work required.
What exhuast is on that camaro
Quarter Mile times with the tsp cams?
2nd gear❤️🤤
can you make an LSX 750 to 850 horsepower pump gas hydraulic roller cost
can't decide between stage 2 or stage 3 for my 2010 ss camaro m6 car
Robert Strittmatter easy answer just go stage 4
alex salazar I'm worried about how it's going to act at low rpms. it's my daily driver right now and it sees parking lots and traffic everyday
Friend has a stage 4 in an auto Camaro does just fine. Might as well go big or go home, and send it and get those heads ported 😂
Just a few questions, what axle backs were on this Camaro and where can I go to find this camshaft? I already have TSP 1 7/8ths long tube headers with off-road x pipe
I would definitely appreciate a reply!
What pushrod length is best for this cam for ls3 camaro
7.400
i have this same package is going on a 05 silverado single cab jst have to figure out what exhaust i want to run any recommendations?
This will fit a ls2 l76 model motor in a 07 vmax Sierra?
i want this for my ls3 m6 2010 maro
Texas Speed & Performance already have tsp headers and xpipe
Jason Airborne how do you like the headers? I'm gonna purchase a set very soon for my 01 ss and off-road y pipe
Hey Chevrolet love em