Thank You for this simple but fully explained the gyroscope concept and how it works, No complicated narration, No astronomic physics equations and even no rolling war music! Simply Amazing!..Thank you again
Why is this comment section filled with people who speak poor english and want you to share the exact building instruction via email? It's oddly specific and strange seeing how dead simple the construction is.
I would like to know your concepts so I can understand why you said what you said when you said it. I think a concept is pretty much what you think something would do or how you think something works etc that's your concept of what you see I think that's what it means so now I'm going to Google it 🤣🤜🏾🤛🏿🙏🏾
Yep I was right... con·cept /ˈkänˌsept/ Learn to pronounce See definitions in: All Motoring Philosophy noun an abstract idea; a general notion. "structuralism is a difficult concept" Similar: idea notion conception abstraction conceptualization theory hypothesis postulation belief conviction opinion view image impression picture
Fantastic video! This is really incredible!! I couldn't have spent 4 minutes better than watching this really unbelievable action! It triple worths Discovery!
if you want to slow it down even faster without having to use your fingers then take the clip leads after you've disconnected them from the motor and connect them together (essentially short the motor terminals together). This will in effect turn the motor into a dynamic brake.
I think you did what you want to do. I can imagine that this prototype can be used in two and even one wheeled vehicles in balance without any user help like motorcycles. Maybe this future cars will be smaller, low energy consuming, low friction coefficient, safe and high tech as if from a science fiction film. I support your work guys, congratulations!
@@idk____idk6530 You are right, but tbh I enjoy maths and physics equally. With maths you can make calculations and with physics you can get the intuitive feeling. With both you will become unstoppable.☺️
Next time can you please make another one of these videos where you don't make it stop you give it a countdown to see how long it would take to slow down enough to wear it will fall over on its own please 🙏🏾 TIA much love ❤️🤜🏾🤛🏿
Nice! You could put something like this in a sphere and keep it stable while rotating the sphere so it could actually roll uphill. That would look so weird, especially if the sphere was opaque :)
If you touch both positive and negative wires together because it's a DC motor you can use the motor as a brake but if you want to sell them out again slowly you put a resistor in between the two Leads
Here is a link to a gyroscopically balanced train that had millions spent on it. Brilliant. I messed around trying to balance a scooter, but as my workshop was the spare bedroom I eventually chickened out because if the flywheel had come loose it would have crossed the room to the wall, and burnt it's way through the floor till it got to the kitchen, and my missus would have had a field day! Good fun though. I used steel as it is plenty strong enough. www.absoluteastronomy.com/topics/Gyro_Monorail
how much weight does your gyro have? and how many rpm's your motor provides when loaded? is that a Johnson 73673? thanks for your awesome video so so much!
There was a legit car made in like, the 60s or 70s, that used a gyroscope to do this (two wheel gyroscope stabilized car) the company went bankrupt before perfecting it and ever since then it's been in a retro car museum. It's old tech that could've revolutionized recent year car tech. edit: it's called the gyro-x and it uses 2 trainer wheels or something to keep the car balanced when the gyroscope is turned off and when it's on, the small wheels retract so it's only the two main wheels on the vehicle.
Cool. But the point is to stabilize the gyroscope and time it for 20-30 min to see if it moves on its own accord based on the Earth's rotation. If not we are motionless!
This is Earth Rotation Work With Amechanical UFO part Alien i guess Work Good Excellent is Precise Best Presition Calculation Flatness Two Wheel Front Back Vehicle i guessingg.
Jeee Deee before the universe startet there was no time so it seems like it just appeared out of nowhere But I think there is still something we dont quite understand about other dimensions I mean its even difficult for many people to imagine the 4th dimension and there are probably even more than we can precive or even understand I am pretty sure that we still have a long way ahead of us till we understand the things we cant right now... I still dont belive in an eternal beeing that created us and everything I think "god" or "Allah" or whatever you want to call him is just phsyics we stil have to understand...
Das Sahnebrot there is nothing logical in what you believe the logic is there is nothing can be create without creater , written without writer i suppose you to search about islam and knowing about it from muslims themselves look in islam there is no god but Allah ( in fact there is non relegion belives in one god today like islam) and i think thats why Athiests running from other religions because of contradictions in it and complicated things like multi gods or 3 gods in one that our mind cant belive it! but in islam there is one creater who create us and will brought us to life after death to punishment who dont belive and and rewards the beliver islamqa.info/en/45529
To Fix all these Defective Free energy Designs you need to put super large capacitors in parallel, put the motors in series, use balanced flywheel with precision bearings, use magnetic shielding around the generator, use sound absorption and use a spreadsheet with all readings of current and voltages charted.
Actually I did but I did not make video of it. I can even move it forward and backward. The platform is stable as long as the front wheel does not turn. I think I have to implement some kind of active gymbal controlling in order to make that platform steerable but I don't have the components right now. At the moment I'm busy with my other projects. These other projects cost me much time and money. I have to be patient until I can continue this gyro-project. Anyway thanks for your comment.
Hi! Great video man! For scientific studies, I was interested to know how you managed to fix the wheel to the motor. In first place I was thinking about glue but it appeared to me that it was to weak. Then I thought about welding but the small size of the parts can be tricky to attach. Thx for your answer.
The simple minded people in the comments going off about the materials used have no clue why the wheel needs to have mass in the first place... "I pity your stupidity."
Hi John, yes I have tried different gimbal pivot positions. This position works best for me. The other 2 positions make the gimbal deviates in wider angle very quickly, thus the car will not stand up long. Thanks for your comment.
Or is it the case that the heaviest part of the gyro, in this case the rotor, must still be on top? Will your gyrocar self-balance with the rotor running on the bottom?
+Jimmy Demello Hi, thanks for your comments. You are passing correct information. The gyro has to be top heavy. In my case the wheel is heaviest part of the gyro. I have tried to put heavier part at the bottom (motor on top) but it won't work. I think we can observe the natural movement of a free gyroscope like children´s toy (the gyro will make some kind of rotational movement/precession). In our case we lock the movement on 2 axis (one front-rear wheel axis and the other ist the gyro bearing). The gyro precession stays the same (it just splits the movement into 2 axis). It is a compliment for me that you commented on my video. Actually I got the idea to build this thing from your videos. Have you tried to regulate the gyro directly, instead of putting counterweight and move it from side to side? Thanks again for your comments.
Thanks Okki for the clarification. I always worry I'm putting out the wrong info. Your gyrocar looks great - very professional and the rotor is fantastic - very smooth. I am working on using a servo to control the gimbal. I did it once before but the gyroscope was so unbalanced and vibrated so badly that the sensor was useless so I was unsuccessful. I had a rotor machined but left it in the US - am now in Shangluo, China and have to play with whatever stuff I can come up with here. Hope yours works as planned. You probably saw my final gyrobike project - just to let you know, it would turn left but usually fell over if I turned sharp right - I guess like the C-1 they have to use two gyroscopes. But it was still a kick to get it working.
+Jimmy Demello Don't worry. You do a great job. About this gyrocar: I don't think that I can finish this soon as I have another project which has higher priority. I'm trying to finish my gasoline vapor system for car, so that I can save money on gas. Anyway, I was wondering why C-1 has two gyros and gyro-x has only one (maybe I'm wrong here). And why gyro-x can turn both directions without any stability problem (according some UA-cam Videos). What I would like to know is how sharp C-1 and gyro-x can turn. And also if it is possible to do sharp turn at high speed. Are you planning to come back to US or will you settle down in Shangluo? Regards, Okki.
Gas vapor system sounds like a cool project. Yes, I wondered about the gyro-x car too and I think because it had a much larger rotor it was able to compensate a bit but I seem to remember that the builder of the car says there were unspecified problems at high speed. I would have to find that reference and will look for it. Also, I have never seen the C-1 at speed yet - they always seem to be going slow or in a straight line. I plan to stay in china as long as I can because I really love being here and working with my university students. Life for me, at 62, in America is pretty boring. I hope you continue your gyrocar work as it looks like a real winner - especially using active gimbal control as there are no projects out there that really give the details of how to build one other than patents - I can't read patentese. There are a couple guys out there with their self-balance monorails but they seem pretty tight-lipped about the details - hope that is not unfair to say. Anyway, good luck with your projects.
+Jimmy Demello Thank you for your support and friendly conversation. This gives me motivation to push my gyro project forward. I will post my progress about this project. Now I'm wondering how beautiful this life would be if everybody in this world can have or make this kind of dialog. Everybody respect each other, talking honestly with open mind, supporting each other and so on... but I think I'm just dreaming.
Guess I have been passing wrong information out there about gyro balancing. I was only able to make mine balance if the motor was on top and top heavy. Seems though in your case that as long as the flywheel is massive enough, it does not have to be top heavy.
Honda self-balancing bike goes electric. Honda will unveil an electric version of its Riding Assist self-balancing motorcycle at the Tokyo Motor Show in October 2018indicating they could be the first to market with this technology. Salute
you need two counter spinning gyro discs, able to instantly turn 90 degrees, or even 4 counter spinning gyro discs mounted on a flat circular holder, then have them all counter spinning and then flip the orientation from horizontal to vertical, see how fast it wants to go straight up :D the ufo disc shaped craft code is cracked, i have a few perfect disc shaped craft on my channel if there is any interest at all.
Thank You for this simple but fully explained the gyroscope concept and how it works, No complicated narration, No astronomic physics equations and even no rolling war music! Simply Amazing!..Thank you again
You are welcome. Thank you for watching and commenting.
Why is this comment section filled with people who speak poor english and want you to share the exact building instruction via email? It's oddly specific and strange seeing how dead simple the construction is.
What is that horrible noise?
@@Gunzee é o barulho dá água da torneira da cozinha 🙂
Ah, the gyrocar, now in toy versions
Who is the culprit?
This design sucks if you ask me
Because of some people like him my love towards physics is increasing day by day
you have put great effect for this model that no one shouldn't question you, GREAT JOB
Thameen Ansari, thanks for your comment. Some people just don't realize how difficult it is to build this toy. This simple look doesn't equal easy.
this video cleared all my conpects..thank you
+abhijith alolickal You are welcome.
@@OkkiMoeljadi I think he is a great joker 😂😂
I would like to know your concepts so I can understand why you said what you said when you said it. I think a concept is pretty much what you think something would do or how you think something works etc that's your concept of what you see I think that's what it means so now I'm going to Google it 🤣🤜🏾🤛🏿🙏🏾
Yep I was right...
con·cept
/ˈkänˌsept/
Learn to pronounce
See definitions in:
All
Motoring
Philosophy
noun
an abstract idea; a general notion.
"structuralism is a difficult concept"
Similar:
idea
notion
conception
abstraction
conceptualization
theory
hypothesis
postulation
belief
conviction
opinion
view
image
impression
picture
Nice build. A super demonstration of Gyro Stability and precession.
Thanks!
Fantastic video! This is really incredible!! I couldn't have spent 4 minutes better than watching this really unbelievable action! It triple worths Discovery!
Parabéns pela construção deste giroscópio. Obrigado pela postagem.
if you want to slow it down even faster without having to use your fingers then take the clip leads after you've disconnected them from the motor and connect them together (essentially short the motor terminals together). This will in effect turn the motor into a dynamic brake.
regenerative brake
Or reverse the terminals
Its too risky for the electro motor, it should to give a little driver circuit to avoid roasted motor.
Finally I see a homemade gyroscope that isnt a CD rom hotglued to a motor shaft. Nice job!
Haha,
A car with 2 wheels is not a car. Its a bike.
any thin that is balanced is a car4
very nice demonstration. added to my playlist (scavourites) = science+favorites.
Thank you Ankit Arya.
DISLIKE! BECAUSE YOU STOPPED THE GYRO BY FORCE AND DID NOT LET US SEE HOW THE TOY FALLS ON ITS OWN! >:)
:P
@@OkkiMoeljadi please could you tell me the weight and dia meter of flywheel
Thanx...for such a wonderful demonstration.
You are welcome. Thanks for commenting.
I didn't know balance could be achieved without roll... I see you have yaw and pitch but no roll and it's still standing. Nice!
now i got the logic behind self balanced bike....superb man
I find it really disturbing that you did not push the cart with the battery placed on the chassis for the purpose of this demonstration.
I did. Have you checked my second gyro-video?
Me too, but found this video: ua-cam.com/video/BWKCImS8mVI/v-deo.html&ab_channel=OkkiMoeljadi
I think you did what you want to do. I can imagine that this prototype can be used in two and even one wheeled vehicles in balance without any user help like motorcycles. Maybe this future cars will be smaller, low energy consuming, low friction coefficient, safe and high tech as if from a science fiction film. I support your work guys, congratulations!
Thanks!
HOW BEAUTIFUL IS PHYSICS!
Untill and unless You won't know the mathematical equations and Proof of gyroscope 😂😂 . Then tell physic is beautiful 😔😕
@@idk____idk6530 You are right, but tbh I enjoy maths and physics equally. With maths you can make calculations and with physics you can get the intuitive feeling. With both you will become unstoppable.☺️
@@DanyalShabirr math is not for everyone bro . I hate math .
Realy Nice build and demonstration !!!
Thanks!
If I come back from the pub with this spinning on my head , will it help me make it in a straight line ? :p lol
I want a scooter with that system.
The self balancing when parked would be really cool.
@Robert Green
Cool !!
Would have enjoyed seeing your gyro toy running down a long smooth road
Next time can you please make another one of these videos where you don't make it stop you give it a countdown to see how long it would take to slow down enough to wear it will fall over on its own please 🙏🏾 TIA much love ❤️🤜🏾🤛🏿
I want to make a food van version of a gyro car and use it to sell gyros just to confuse people.
😅
@@AltamashMusaShaikh they can buy the gyros from a euro?
Nice! You could put something like this in a sphere and keep it stable while rotating the sphere so it could actually roll uphill. That would look so weird, especially if the sphere was opaque :)
Thanks! Airplanes have that already.
Allen Smith .
Add another gyroscope, but turning in the opposite direction, and you will have much more balance.
Amazing self balance
Every tray of waiter should have one of those.
If you touch both positive and negative wires together because it's a DC motor you can use the motor as a brake but if you want to sell them out again slowly you put a resistor in between the two Leads
amazing good job
Thank you!
hello and welcome to a science magic called precession
Центр тяжести лучше опускать. Колесо соответственно не стоило поднимать вверх
Gyro bike more like. Cool AF.
excellent , congratulations !
Thanks!
Nice concept demo, thanks!
My pleasure!
Battery on the platform and push
the battery's surface looks so smooth and shiny I thought it to be a folded phone.
Hmm, I wonder if you could make a bigger one for a boat and save the $100k you would have spent on a Seakeeper? 😁
Wow, thanks for this demonstration. I had no idea the principle was so simple.
You're welcome. Yes, this looks so simple. But I prefer to call this "the simplicity of complexity".
Did it stabilize the planet or what
Pavel Prokhanov ist called a gyroscope
Look it up
It is amazing. We are going to make it now, but there is something I want to know.
I am wondering how to connect the gyro wheel to the motor shaft.
Thank you. The wheel is pressed fit directly to the shaft of the motor.
Why you don't build a battery box and put it in and push the cart around ? Would have been a better video to watch how the x car work ?
Why don't you just watch my other gyro-videos? That would have been better for you to understand my work.
A qwality build ! Good job!
Thank you!
*Gyro-X Car* Search for it here on UA-cam !
You should have mounted the battery to it so you could roll it.
I love the simplicity of this. Very cool!
I did that. Check out my other gyro videos.
Here is a link to a gyroscopically balanced train that had millions spent on it. Brilliant. I messed around trying to balance a scooter, but as my workshop was the spare bedroom I eventually chickened out because if the flywheel had come loose it would have crossed the room to the wall, and burnt it's way through the floor till it got to the kitchen, and my missus would have had a field day! Good fun though. I used steel as it is plenty strong enough.
www.absoluteastronomy.com/topics/Gyro_Monorail
Hi Roger, thanks for the link. And how is your scooter going? Have you managed to stabilize it?
excuse me sir...can u please explain the dimensions of the flywheel and the precision providing clamp...what's the exact price of the flywheel sir??
Now it’s time to build a flying saucer
I have a question, for a small car do it needs to be horizontal or vertical to keep it falling on its side?
You can mount it either way but the more important thing is to control it correctly.
how much weight does your gyro have? and how many rpm's your motor provides when loaded? is that a Johnson 73673?
thanks for your awesome video so so much!
+Beto Ávila You are welcome. The gyro-wheel weighs 0.8 kilograms and the motor is Johnson 64823, it is rated at 18000 rpm.
+Okki Moeljadi thank you soooooo much
This is the future tech..
There was a legit car made in like, the 60s or 70s, that used a gyroscope to do this (two wheel gyroscope stabilized car)
the company went bankrupt before perfecting it and ever since then it's been in a retro car museum.
It's old tech that could've revolutionized recent year car tech.
edit: it's called the gyro-x and it uses 2 trainer wheels or something to keep the car balanced when the gyroscope is turned off and when it's on, the small wheels retract so it's only the two main wheels on the vehicle.
ua-cam.com/video/epvEyiVby9A/v-deo.html
Now, this is what science is all about.. cakep!
R.I.P motor windings :P, they looked glowing red, all tho that couldve just been the brushes.
Cool. But the point is to stabilize the gyroscope and time it for 20-30 min to see if it moves on its own accord based on the Earth's rotation. If not we are motionless!
It was originally named the gyroscope because it was used to see Earth's rotation.
Nothing new....there exist a car from the 1960 who exactly use this technique...its running with 2 wheels 😎
This is amazing!
How to calculate between:
Body mass weight / weight of flying wheel, To gain equal / more inertia to balance the object.
I did not do any calculation. I just use materials I already have.
@@OkkiMoeljadi I will simulate this digitally and record the data.
This is Earth Rotation Work With Amechanical UFO part Alien i guess Work Good Excellent is Precise Best Presition Calculation Flatness Two Wheel Front Back Vehicle i guessingg.
Nyc great explanation
the gyroscope would have worked just fine upside down...
Azmeri Liza yeah but the cables would touch the rotating part
Are you used any software for this project like Auto-CAD,CATIA,Solid work.
No, I did not use any CAD-Software to build this.
You stil don't get it
Like the video. Did you cast the gyro wheel?
Thanks. No, I bought the wheel. Please read my video description.
Ok thankyou.
I got to remember to read the description.
We are amazing creatures
Flying Solo
thanks for Allah
Jeee Deee 😒 im sorry but there is no god...
Atleast not in the form you believe...
Das Sahnebrot
There is no book with words and sentences that written and printed with itself
Jeee Deee before the universe startet there was no time so it seems like it just appeared out of nowhere
But
I think there is still something we dont quite understand about other dimensions
I mean its even difficult for many people to imagine the 4th dimension and there are probably even more than we can precive or even understand
I am pretty sure that we still have a long way ahead of us till we understand the things we cant right now...
I still dont belive in an eternal beeing that created us and everything
I think "god" or "Allah" or whatever you want to call him is just phsyics we stil have to understand...
Das Sahnebrot
there is nothing logical in what you believe
the logic is there is nothing can be create without creater
, written without writer
i suppose you to search about islam and knowing about it from muslims themselves
look in islam there is no god but Allah ( in fact there is non relegion belives in one god today like islam)
and i think thats why Athiests running from other religions because of contradictions in it and complicated things
like multi gods
or 3 gods in one that our mind cant belive it!
but in islam there is one creater who create us and will brought us to life after death to punishment who dont belive and and rewards the beliver
islamqa.info/en/45529
Really neat and non-intuitive. Great demonstration!
Thanks!
More like fingerbreaker 9000
Thats crazy how the gyro knows were to be to stay up
BLACK MAGIC
BURN THE WITCH
no, it is gyro!
if you mounted the gyro vertically it could be used as a reaction wheel.
Right now it is basically a top.
Short the leads together for a regenerative brake
To Fix all these Defective Free energy Designs you need to put super
large capacitors in parallel, put the motors in series, use balanced
flywheel with precision bearings, use magnetic shielding around the
generator, use sound absorption and use a spreadsheet with all readings
of current and voltages charted.
Grease the Metals a bit
Why you didn't put the battery onto the kick scooter and push it to move forward? How stable in motion would it be? How it behaves when turning?
Actually I did but I did not make video of it. I can even move it forward and backward. The platform is stable as long as the front wheel does not turn. I think I have to implement some kind of active gymbal controlling in order to make that platform steerable but I don't have the components right now. At the moment I'm busy with my other projects. These other projects cost me much time and money. I have to be patient until I can continue this gyro-project. Anyway thanks for your comment.
May be it's called "Time Machine"
Which is very useful to waste others time..
Hi! Great video man!
For scientific studies, I was interested to know how you managed to fix the wheel to the motor.
In first place I was thinking about glue but it appeared to me that it was to weak. Then I thought about welding but the small size of the parts can be tricky to attach.
Thx for your answer.
The wheel is attached directly to the motor shaft.
make it levitate...
Cool demo! Thanks bruv
You are welcome.
Four minutes wasted looking at a "car" that doesn't move ...
HI, Great experiment.
where did you get the flywheel from ?
Thanks. Please read the description completely. I have put that info with link a long time ago.
How did I miss that!
Thanks for doing that, it's very useful.
Thank you.
Keep making experiment.
You have very good skills.
You are welcome. Thanks for your nice compliment. I don't have good skills, I'm just trying not to give up. ;)
Надо было поставить аккум на самокат и катнуть.
Could you tell me, what is the wait of gyroscopic disc?
I'm doing a project so I need information.
The simple minded people in the comments going off about the materials used have no clue why the wheel needs to have mass in the first place... "I pity your stupidity."
hi mate, you have three holes on either side of your gimbal - what difference did changing the mounting position make? it runs better than my attempt!
Hi John, yes I have tried different gimbal pivot positions. This position works best for me. The other 2 positions make the gimbal deviates in wider angle very quickly, thus the car will not stand up long. Thanks for your comment.
This is lame who even cares
Tso this is how those modern bikes works... Now I know. I think this is also what is used in the boat to stabilize.
Yes, you are absolutely correct. Cheers!
Yes this is used un boat stabilizers
Gyronya dipasang vertikal seperti ban depan om. Terus dikasi push rod buat counter roda duanya.
fantastic !
孝子野村 Thank you.
เยี่ยมเลย ...อนาคตก็ทำติดมอเตอร์ไซด์คงไม่มีวันล้มแน่ๆ
Or is it the case that the heaviest part of the gyro, in this case the rotor, must still be on top? Will your gyrocar self-balance with the rotor running on the bottom?
+Jimmy Demello Hi, thanks for your comments. You are passing correct information. The gyro has to be top heavy. In my case the wheel is heaviest part of the gyro. I have tried to put heavier part at the bottom (motor on top) but it won't work. I think we can observe the natural movement of a free gyroscope like children´s toy (the gyro will make some kind of rotational movement/precession). In our case we lock the movement on 2 axis (one front-rear wheel axis and the other ist the gyro bearing). The gyro precession stays the same (it just splits the movement into 2 axis). It is a compliment for me that you commented on my video. Actually I got the idea to build this thing from your videos. Have you tried to regulate the gyro directly, instead of putting counterweight and move it from side to side? Thanks again for your comments.
Thanks Okki for the clarification. I always worry I'm putting out the wrong info. Your gyrocar looks great - very professional and the rotor is fantastic - very smooth. I am working on using a servo to control the gimbal. I did it once before but the gyroscope was so unbalanced and vibrated so badly that the sensor was useless so I was unsuccessful. I had a rotor machined but left it in the US - am now in Shangluo, China and have to play with whatever stuff I can come up with here. Hope yours works as planned. You probably saw my final gyrobike project - just to let you know, it would turn left but usually fell over if I turned sharp right - I guess like the C-1 they have to use two gyroscopes. But it was still a kick to get it working.
+Jimmy Demello Don't worry. You do a great job. About this gyrocar: I don't think that I can finish this soon as I have another project which has higher priority. I'm trying to finish my gasoline vapor system for car, so that I can save money on gas. Anyway, I was wondering why C-1 has two gyros and gyro-x has only one (maybe I'm wrong here). And why gyro-x can turn both directions without any stability problem (according some UA-cam Videos). What I would like to know is how sharp C-1 and gyro-x can turn. And also if it is possible to do sharp turn at high speed. Are you planning to come back to US or will you settle down in Shangluo? Regards, Okki.
Gas vapor system sounds like a cool project. Yes, I wondered about the gyro-x car too and I think because it had a much larger rotor it was able to compensate a bit but I seem to remember that the builder of the car says there were unspecified problems at high speed. I would have to find that reference and will look for it. Also, I have never seen the C-1 at speed yet - they always seem to be going slow or in a straight line. I plan to stay in china as long as I can because I really love being here and working with my university students. Life for me, at 62, in America is pretty boring. I hope you continue your gyrocar work as it looks like a real winner - especially using active gimbal control as there are no projects out there that really give the details of how to build one other than patents - I can't read patentese. There are a couple guys out there with their self-balance monorails but they seem pretty tight-lipped about the details - hope that is not unfair to say. Anyway, good luck with your projects.
+Jimmy Demello Thank you for your support and friendly conversation. This gives me motivation to push my gyro project forward. I will post my progress about this project. Now I'm wondering how beautiful this life would be if everybody in this world can have or make this kind of dialog. Everybody respect each other, talking honestly with open mind, supporting each other and so on... but I think I'm just dreaming.
Thanks for sharing, uploading a video takes time and dedication, greetings.Gracias por compartir,subir un video lleva tiempo y dedicación,un saludo.
Thanks for watching and your kind comment.
see you!happy easter.
Guess I have been passing wrong information out there about gyro balancing. I was only able to make mine balance if the motor was on top and top heavy. Seems though in your case that as long as the flywheel is massive enough, it does not have to be top heavy.
what is use of gyrocar
basavaraj duddagi u can make big 2 wheel vehicles
I hope you did some rough calcutations and measurements to see how close or far you were to blowing that sand cast India/China steel/iron flywheel.
Future bikes will have this for stability.
Hi
Honda self-balancing bike goes electric. Honda will unveil an electric version of its Riding Assist self-balancing motorcycle at the Tokyo Motor Show in October 2018indicating they could be the first to market with this technology. Salute
you need two counter spinning gyro discs, able to instantly turn 90 degrees, or even 4 counter spinning gyro discs mounted on a flat circular holder, then have them all counter spinning and then flip the orientation from horizontal to vertical, see how fast it wants to go straight up :D the ufo disc shaped craft code is cracked, i have a few perfect disc shaped craft on my channel if there is any interest at all.
How did you couple the motor shaft to the wheel? Thx, Mark
Hi Mark. I just pressed the motor shaft directly into the wheel.
Why not start at the static position?
Very good work!
Thanks!
Hi,
Could you tell us where did you buy your equipment?
I would like to make one me too.
^^
I have added this information in the description. Good luck with your project!
感謝你，讓我啓發了另外一種靈感的構想
。 ~非常的感謝~
Can anyone explain why the gyro only pivots on one axis perpendicular to the stabilized axis? I've seen the same thing on boat gyros and curious.