Master class in cylinders! After watching your set I am fully prepared to disassemble the FEL dump cylinder on my Kubota BX23. At full extension, the gland offers little support yi the shaft. I can now diagnose if it only needs new soft parts, or if it has a deficient design that would benefit from being longer with some sort of improved shaft support. Many thanks for taking the time to show the details, as that is where the knowledge is.
OMG You did a GREAT Job there! I have done tons of these but never had option to machine any of it. It just shows me the skill of all rebuilders is still going strong. Very good!
You do good work. I worked in an ultra precision machine shop fo many, many years and am retired now. I cut my teeth on Pratt 2e jig borers working to a tenth tolerance. Watching you made me miss my younger days when I had good eyes and could eyeball things close enough to put a one tenth interapid on it and not run out of travel.
Excellent work! It is a pleasure to watch you. I like how you explain each step in detail and show us the machining and welding. You are an excellent teacher too. keep up the good work!
I have been involved in your type of work in my career at General Motors Euclid (Terex) Division before retirement, and it is a true pleasure to watch you work!
I watched both parts. Good stuff, I love all things mechanical, I'm of an age that we were shown the basics of all the things you did here. Young men need this stuff. Thanks
We do tons of cylinder repair at my work and I have been there 16 years..... Usually turn a "pin" on the end of the rod and drill a "socket" in the eye for alignment. The drill and tap idea is AWESOME thank you! PS I work in another department but will pass this on.
+gentharris I use that trick sometimes too but find the thread is even better. Holds the eye and you don't have to press it on, or hold it if the fit is too loose.
I almost didn't watch this because I see and have done this kind of work for a long time, but I love to learn and you do a great job of teaching! Thanks again!
I thoroughly enjoyed sitting on your shoulder while you did your very good work. Excellent video, I like the way you talk in a normal tone, and I like the way you explain what you are doing to where it's easy to follow. Better than anything on tv that's for sure.
What can I say...? About the best video on UA-cam regarding hydraulic cylinder rebuild!! Super excellent ABOM79!! I am one of your dedicated fans! Thanks for your expertise and posting!!
This was a fun video to watch, not that the others are not. I learned a few things on this, as I typically do. Thank you for the time and effort to show this one. Drew
Just subscribed today. I'm not a machinist, but I love watching creative people like you do your magic. I learned about you through Keith Rucker's channel. Keep up the excellent work!
Just started watching you, love your channel! As a new high school graduate who's had a bit of experience with milling machines and lathes in shop class it's amazing to learn all your tricks, and everything I've been doing wrong lol
You remind me of my High School metal shop teacher in a few ways . Nice memory and the fun part is everything you do I understand it . Welding well thats my next learning project
Man this brought back memories of when I used to machine. I worked in a machine shop where we repaired and built these completely from scratch. It's actually a lot of fun. Loved the video. Keep up the great work.
Nice job on finishing the cylinder up. I caught the 1/4-28 thing a moment before you pointed it out, good catch! Wish I could catch myself like that more often, learning process I guess! Thanks!!
As will all jobs Adam certainly makes it look easy! With the right tools and a bit of knowledge gained from these videos I am sure that I can do the same for my friends old BobCat. Thanks Adam!
I appreciate your level of detail, thorough explanation of every step, tool recommendations and all without any cursing/ swearing or weird background music!! Trading time with your friends also neat!! Keep up the GREAT work!!
After watching both videos I learned a lot and viewed most all comments and decided to subscribe, excellent video and easy to understand being a novice at machining correctly on a 9" southbend lathe older than me. Love the setups with dial indicators.
Adam you're a man of many talents.. Enjoy watching your channel when I have time. Not sure where you find time to do so much. Congrats on your success.
Great video, I like the way you talk to your work, I do the same, unfortunately sometimes Abom torque turns into Fbomb comments, but it's all good. You should be a teacher, this art of yours is as good as I've ever seen. Thanks again.
Fernando is one fortunate person to have you rebuilding his cylinder, probably better than the vendor of his tractor. and most likely less expensive too!
G'day Adam, good rundown on that build, what we take for granted from all the years of doing this stuff is really uncommon ground for many and hopefully helps them out in approaching a job that they may not have thought is within their capabilities, notwithstanding so many variants in Hydraulic cylinder parts and seal configurations. Cheers Bruce see you soon.
good job on actually installing the dust seal on the head gland......i hate it when people forget to put that in(very important if you ever plan on getting it back apart)
As always I love your machine work. My business is Hydraulic work as well on tractors and forklifts. Thank you for sharing the information for Scott Industries. This video was fun to watch but I have to disagree with your changing the piston seal size. I feel sorry for the next guy that has to repack that cyl. If it’s not you. For myself I order the packing kits before doing the work for less down time and that cyl. would have ruined my day. But I get. You did a wonderful job ! Just keep in mind the mechanics that may have to work on you improvements. I get my seals at O-Rings and Things located in Fontana CA. They have everything. Again this video was the bomb. Thank you.
Another job well done. Thanks for sharing the good work! It's tough any more to find a person who takes pride in their work, but I can certainly see it here there is some pride and satisfaction in the job well done.
This project was interesting and educational to watch. I've never disassembled a hydraulic cylinder or seen all the seals and wipers it uses. You make it look very easy.
Hmm, Suggestion to Edge Tech. Instead of a thumb screw, how about a stiff spring detent like on a ratchet. That way it will stay in place but be faster to switch from position to position.
Hi Adam, another great video. When you meet that Bonnie Lad John Mills at the Bash, try to give me a 'thumbs up' with John on camera, so to speak. Thanks for sharing big chap. Kindest regards. Joe.
thanks Adam for the videos I really enjoying it,, my major is Mechanical Engineering specialized in maintenance but I really enjoy seeing the machining I like ur way doing the stuff I like ur shop ,, keep going and thanks
Hi Adam= I know this video is older but I really enjoy the hydraulic re-builds I always wanted to get into Hydraulics and you make it look so easy just like all your GREAT work!!! I was wondering what your take is on building these cylinders from scratch only smaller than this size I am self taught in machine work (still a Loong Long WAAAY to go I might add! lol) and have learned a GREAT DEAL from you! and mrpete! I bought a 1950's SB 14"x72" tool room lathe w/tapper attachment and really want to try and make a cylinder any info you can offer would be really welcome-Thanks for all you time and effort to make and post these Wonderful videos !!!
Adam, I've been watching your videos for a couple years now but normally via ROKU box with no way to comment. So this is a long overdue thank you and two thumbs up for your inspiration, sharing of knowledge, methods and great projects. Hope you had a great time at the summer bash! Keep the videos coming. Thanks, Dean
Good job Adam .Just keep one thing in mind not all millwrights make millwright marks you know what I mean . Some of us try our best to be craftsmen in our trade just as you are . Sorry for the long comment but something you said a few responses struck a cord with the way a machinist views a millwright . Great videos keep up the great work .
I do hydraulics and I want to say that I enjoyed watching the video. I always wonder how they get the rod eye on the rod and I understand now why you tapped that 1/4-20 in the rod and rodeye, to centre it to get welded. Keep up the good work in the videos.
3:48 "I did this today at work". Mate, what are you doing working for someone? You have all the skills to make your own way. Hopefully, UA-cam soon allows you to do your own thing, and maybe take some youngsters under your wing to pass on your knowledge. Love your work mate!
Another great video Adam, I really like the fact im seeing young guys gain knowledge interest and inspiration from watching you work. I feel our country has lost much of its can-do spirit with the new hi tech age we live in. Too many young guys grow up with no skills except for how to use a cell phone and video controller, one of our countries biggest strengths used to be its strong manufacturing capability like back in WWII era. I think your channel and those like it are doing more good for the country than most of its politicians, we need to teach our youth important skills like this so they aren't lost leaving us to buy from other countries that take our money and send us sub standard junk. MAKE IT IN THE USA-!
i also like the psm seal...almost the same as the 2700 but different groove dimensions. You also might mention sometime that a HUGE advantage of the ps2700 or psm piston seal is the fact that they do not stretch out during application like the ps1400, ps1600, and ps1800
Just found your channel. Awesome work!!! As a farmer I've done a few repacks, haven't seen the machine work before, very interesting! Great vijayo! Subscribed! Thanks.
Aloha Adam, Most of the time I had trouble with the pin spanner because before me several people had removed it with a hammer and punch, I guess that goes back to the sign on Keith Fenner's wall, it costs more to repair your repair.. and is that a special ratchet for working around corners or a calibrated torque arm!!! Aloha and I enjoy your channel very much, keep up the good work. Aloha No Chuck
Your expertise is very humbling. Your moral code is an inspiration. The world needs more of this all around. Thank you for sharing
that's what it's all about. Not always making money, but helping people who help you and continuing on that relationship. Good on you.
Master class in cylinders! After watching your set I am fully prepared to disassemble the FEL dump cylinder on my Kubota BX23. At full extension, the gland offers little support yi the shaft. I can now diagnose if it only needs new soft parts, or if it has a deficient design that would benefit from being longer with some sort of improved shaft support. Many thanks for taking the time to show the details, as that is where the knowledge is.
+Jennifer WhiteWolf Very good. Telescopics can be a whole different animal.
OMG You did a GREAT Job there!
I have done tons of these but never had option to machine any of it.
It just shows me the skill of all rebuilders is still going strong.
Very good!
You do good work. I worked in an ultra precision machine shop fo many, many years and am retired now. I cut my teeth on Pratt 2e jig borers working to a tenth tolerance. Watching you made me miss my younger days when I had good eyes and could eyeball things close enough to put a one tenth interapid on it and not run out of travel.
Excellent work! It is a pleasure to watch you. I like how you explain each step in detail and show us the machining and welding. You are an excellent teacher too. keep up the good work!
I have been involved in your type of work in my career at General Motors Euclid (Terex) Division before retirement, and it is a true pleasure to watch you work!
I watched both parts.
Good stuff, I love all things mechanical, I'm of an age that we were shown the basics of all the things you did here. Young men need this stuff. Thanks
Abom you are a true inspiration to machining. Just love viewing your Chanel even though I can't machine anymore.
Thank you so much for the vids!! Every time I watch this stuff, I realize I’ve still got a ways to go.
We do tons of cylinder repair at my work and I have been there 16 years.....
Usually turn a "pin" on the end of the rod and drill a "socket" in the eye for alignment.
The drill and tap idea is AWESOME thank you!
PS I work in another department but will pass this on.
+gentharris I use that trick sometimes too but find the thread is even better. Holds the eye and you don't have to press it on, or hold it if the fit is too loose.
Yea your solution is brilliant!!!
I almost didn't watch this because I see and have done this kind of work for a long time,
but I love to learn and you do a great job of teaching!
Thanks again!
Abom79 086
Thanks for the video. I have to replace the seals on my Bobcat 331 cylinder. I really appreciate your explanation and video production quality. 👍🏼
I thoroughly enjoyed sitting on your shoulder while you did your very good work. Excellent video, I like the way you talk in a normal tone, and I like the way you explain what you are doing to where it's easy to follow. Better than anything on tv that's for sure.
What can I say...? About the best video on UA-cam regarding hydraulic cylinder rebuild!! Super excellent ABOM79!! I am one of your dedicated fans! Thanks for your expertise and posting!!
This was a fun video to watch, not that the others are not. I learned a few things on this, as I typically do. Thank you for the time and effort to show this one. Drew
Just subscribed today. I'm not a machinist, but I love watching creative people like you do your magic. I learned about you through Keith Rucker's channel. Keep up the excellent work!
Just started watching you, love your channel! As a new high school graduate who's had a bit of experience with milling machines and lathes in shop class it's amazing to learn all your tricks, and everything I've been doing wrong lol
+Ben Kempa Very cool Ben! Glad to have you watching and learning! 👍🏻
Haha, sounds like me not but a year ago. Hopefully Adam's videos help you as much as they have me.
I really enjoyed the video. Excellent workmanship. I really appreciate your teaching.
great video....takes me back to high school machine shop in the 70's....thanks....
I like your way to work man, the way to treat simple things with respect and care.
Thats the most professional repair that will last a very long time,beautiful work thank you .
You remind me of my High School metal shop teacher in a few ways . Nice memory and the fun part is everything you do I understand it . Welding well thats my next learning project
Man this brought back memories of when I used to machine. I worked in a machine shop where we repaired and built these completely from scratch. It's actually a lot of fun. Loved the video. Keep up the great work.
Thanks Adam, I really enjoyed the video. when I don't have a project going I can always look to you for my "shop therapy"!
Nice job on finishing the cylinder up. I caught the 1/4-28 thing a moment before you pointed it out, good catch! Wish I could catch myself like that more often, learning process I guess! Thanks!!
As will all jobs Adam certainly makes it look easy! With the right tools and a bit of knowledge gained from these videos I am sure that I can do the same for my friends old BobCat. Thanks Adam!
I appreciate your level of detail, thorough explanation of every step, tool recommendations and all without any cursing/ swearing or weird background music!! Trading time with your friends also neat!! Keep up the GREAT work!!
Our company mainly engages in international trade and provides satisfactory products and services to international customers.
After watching both videos I learned a lot and viewed most all comments and decided to subscribe, excellent video and easy to understand being a novice at machining correctly on a 9" southbend lathe older than me. Love the setups with dial indicators.
Adam it's great to see the machining applications applied to actual 'jobs'. Thank you.
I really enjoyed watching the series. Thanks. You cured my curiosity for how these hydraulic rams work. Now I know.
Everyone should have been born with a lathe. Nice work and great machine shop & tools.
Adam you're a man of many talents.. Enjoy watching your channel when I have time. Not sure where you find time to do so much. Congrats on your success.
+Tom Baugh My day usually starts at 6 am and ends at 10pm.
It would be wonderful to see these back in work... Especially if it's your stepdad.
Wow, Repairable is always tougher than the new one, it has been done very perfectly, Good job, highly appreciable.
Hydraulics & Pneumatics are Incredible! Lot's of Fun Math Involved!
Thanks Adam!
Great video, I like the way you talk to your work, I do the same, unfortunately sometimes Abom torque turns into Fbomb comments, but it's all good. You should be a teacher, this art of yours is as good as I've ever seen. Thanks again.
I just keep the fboms off video, my viewers appreciate it.
Put 'em in a can, weld it shut, and mail it off to AvE. He'll use 'em.
Fernando is one fortunate person to have you rebuilding his cylinder, probably better than the vendor of his tractor. and most likely less expensive too!
+Joseph Wilson He's family and we always help each other when we can. He's done a lot for me too, like AC repair.
WOW!!! You are a Master Machinist and Craftsman. Congratulations and very well done. ☀️
G'day Adam, good rundown on that build, what we take for granted from all the years of doing this stuff is really uncommon ground for many and hopefully helps them out in approaching a job that they may not have thought is within their capabilities, notwithstanding so many variants in Hydraulic cylinder parts and seal configurations. Cheers Bruce see you soon.
+Bruce Whitham Thanks Bruce!
God bless you! You come across as a talented, gifted and caring person.
Well done. I enjoyed your Video all the way from Perth western Australia
good job on actually installing the dust seal on the head gland......i hate it when people forget to put that in(very important if you ever plan on getting it back apart)
Adam, I see you "roughed it in" at a thou over!
Very good work as always, thanks for thew great video.
All the best,
Eric
As always I love your machine work. My business is Hydraulic work as well on tractors and forklifts. Thank you for sharing the information for Scott Industries. This video was fun to watch but I have to disagree with your changing the piston seal size. I feel sorry for the next guy that has to repack that cyl. If it’s not you. For myself I order the packing kits before doing the work for less down time and that cyl. would have ruined my day. But I get. You did a wonderful job ! Just keep in mind the mechanics that may have to work on you improvements. I get my seals at O-Rings and Things located in Fontana CA. They have everything. Again this video was the bomb. Thank you.
Just found your channel. Great job. I sat here last night for 6hrs and I have a lot to go!
Another job well done. Thanks for sharing the good work! It's tough any more to find a person who takes pride in their work, but I can certainly see it here there is some pride and satisfaction in the job well done.
I did enjoy the video thanks for sharing. Always learning something new is very pleasing.
Nice job.... look forward to your projects every Saturday.....
You’re an artist sir! Regards from Brazil!
Very nice work. I've done four of these on my Ford 2000 tractor FEL.
What a master craftsman! Enjoy your work. Great production work, too. Thanks.
Nice work. Love the caliper trick.
This project was interesting and educational to watch. I've never disassembled a hydraulic cylinder or seen all the seals and wipers it uses. You make it look very easy.
Great video on the overhaul repair and machining.
You are making a very good teacher ! What kind of education do you have ? You have an authoritative voice.
Hmm, Suggestion to Edge Tech. Instead of a thumb screw, how about a stiff spring detent like on a ratchet. That way it will stay in place but be faster to switch from position to position.
Hi Adam, another great video. When you meet that Bonnie Lad John Mills at the Bash, try to give me a 'thumbs up' with John on camera, so to speak. Thanks for sharing big chap. Kindest regards. Joe.
Thanks 🙏 for an AWESOME 👏 video. Learn something everyday.
Abom really enjoy your videos I like the way you put the eye on the rod it is lined up good keep up the good work
thanks Adam for the videos I really enjoying it,, my major is Mechanical Engineering specialized in maintenance but I really enjoy seeing the machining
I like ur way doing the stuff I like ur shop ,, keep going and thanks
Thank you for sharing your knowledge and experience with us in the you tube viewing world.and great job filming.
Thank you Adam. Perfect end to the evening. Great video as always my friend.
+Brian Streufert Thanks Brian!
Another great video Adam...always enjoy the hydraulic work vids.
Fantastic video. Wish I had your skill and kit.
It's not what you know, its who you know,,nice work.
As always Very interesting to Learn new things from you Adam. Cheers from Australia
A GREAT WAY FOR ME TO SPEND THE EVENING. GOOD JOB. THANKS FOR THE VIDEO.
A master at work. Picasso eat yer heart out.
Thanks for making this for us machinist wannabes.
Amazing workmanship
Excellent job Adam.I hope Fernando gets many years of good wear out of that fresh rebuild.
Hi Adam= I know this video is older but I really enjoy the hydraulic re-builds I always wanted to get into Hydraulics and you make it look so easy just like all your GREAT work!!! I was wondering what your take is on building these cylinders from scratch only smaller than this size I am self taught in machine work (still a Loong Long WAAAY to go I might add! lol) and have learned a GREAT DEAL from you! and mrpete! I bought a 1950's SB 14"x72" tool room lathe w/tapper attachment and really want to try and make a cylinder any info you can offer would be really welcome-Thanks for all you time and effort to make and post these Wonderful videos !!!
Love watching a lathe work ❤
Adam,
I've been watching your videos for a couple years now but normally via ROKU box with no way to comment. So this is a long overdue thank you and two thumbs up for your inspiration, sharing of knowledge, methods and great projects. Hope you had a great time at the summer bash! Keep the videos coming.
Thanks, Dean
+The Ayr Cave Shop Thanks Dean. Yes the tv watchers can't comment unless you pull it up on your mobile or computer.
Excellent presentation. Love your shop!
Good job Adam .Just keep one thing in mind not all millwrights make millwright marks you know what I mean . Some of us try our best to be craftsmen in our trade just as you are . Sorry for the long comment but something you said a few responses struck a cord with the way a machinist views a millwright . Great videos keep up the great work .
I do hydraulics and I want to say that I enjoyed watching the video. I always wonder how they get the rod eye on the rod and I understand now why you tapped that 1/4-20 in the rod and rodeye, to centre it to get welded. Keep up the good work in the videos.
Cool watching a master at work!!!!
3:48 "I did this today at work". Mate, what are you doing working for someone? You have all the skills to make your own way. Hopefully, UA-cam soon allows you to do your own thing, and maybe take some youngsters under your wing to pass on your knowledge. Love your work mate!
very nice to see the install as well. thx for the healthy vids.
Nice job, I like to see care in craftsmanship.
Another great video Adam, I really like the fact im seeing young guys gain knowledge interest and inspiration from watching you work. I feel our country has lost much of its can-do spirit with the new hi tech age we live in. Too many young guys grow up with no skills except for how to use a cell phone and video controller, one of our countries biggest strengths used to be its strong manufacturing capability like back in WWII era. I think your channel and those like it are doing more good for the country than most of its politicians, we need to teach our youth important skills like this so they aren't lost leaving us to buy from other countries that take our money and send us sub standard junk. MAKE IT IN THE USA-!
You do fantastic work!
You have an amazing amount of tools.
What a great job..Adam never disappoints 😉
Excellent video . I learned a lot
i also like the psm seal...almost the same as the 2700 but different groove dimensions. You also might mention sometime that a HUGE advantage of the ps2700 or psm piston seal is the fact that they do not stretch out during application like the ps1400, ps1600, and ps1800
+travnturner Absolutely
EXCELLENT INSTRUCTION!!!!
Thanks Abom79! I would enjoy a short video clip of Fernando using the tractor!
+Eric M I'll try and get a video of that one day. I'd like to go and visit his farm.
Another outstanding job!
Nice work Adam
Just found your channel. Awesome work!!! As a farmer I've done a few repacks, haven't seen the machine work before, very interesting! Great vijayo! Subscribed! Thanks.
Aloha Adam, Most of the time I had trouble with the pin spanner because before me several people had removed it with a hammer and punch, I guess that goes back to the sign on Keith Fenner's wall, it costs more to repair your repair.. and is that a special ratchet for working around corners or a calibrated torque arm!!! Aloha and I enjoy your channel very much, keep up the good work. Aloha No Chuck
Just not rated for ABOM torque. LOL
Adam, thanks for another great machining/repair video!
....13
Great job Adam very interesting video!!
Good job with details as always 👍🏻
A very interesting video Adam. Well edited too.Watched it after my 1 week holiday break...
Craftsmanship - and it's great to see.
Another good job well done by Adam, I was waiting for the ABOM torque to flash across the screen :D
Nice work !! tankyou for giv you experience.
Very cool repair.
Great subject. I'm going to try it on my tractor, but the cylinders heads are welded on.( cheap throw away cylinders). Worth a try though....Dave