Very good my friend. The stator should have magnets set at 21 degrees off axis in a north south alternating configuration. Each Stator rotor plate should be off set from one another 17 degrees. The spindle should be free floated in a mag lev gate for rotor. You will need power plates with magnets and a super conductive coil. I won't share the clutch mechanism, however you need a start motor to spin the rotor up to 3000 RPM, disengage it from the spindle. Watch the power out. Then reengage spindle and spin to 6000 RPM, then 9000 and so forth to 20000rpm. Watch the power output. You will need a smart controller, rpm sensors and some other kit. Enjoy
Nice job bro! In my opinion the magnet have to work not in attraction... You have to displace N vs N and S vs S, and the magnet on stator have to be pair and in rotor dispair (or vice versa) for example: 8 in rotor and 9 in stator make this attempt with only 1 disk if it work you can do the same job with other 2 disks and couple the other disks all together. Pay maximum attention to the distance BTW stator and rotor magnets is important because can influence the magnetic field each other. Another attempt you can do is to positioning rotor not completely inside stator and make a distance of 1 o 2 mm BTW magnet axes that can improve the repulsion force BTW magnets. You have machine for build any prototype you can make more try... Please don't abandon you're magnetic motor dream! Thanks for show us your job bro.
Another suggestion coul be to use neodimium magnets more Long in stator minimum double but better triple (just put another one in series) because in this way you'll have more distance between magnet's pole and avoid magnetic influence VS stator magnets.
@@valdissafonovs2565 Troy reed made car and other machines with natural magnets, but he was destroyed or killed or disappeared, who knows. why u insist this is not possible? You waste words saying "impossible", and talking too soon. Even elon musk said something related to the fact that everyone said his ideals are impossible like go to mars or whatever. And he reached to make vertical landing rockets which also it was rumored to be ridiculous and impossible "before it was made".... until he reached to do it real. Why don't you not shut your mouth and just watch how this concept of magnet motors becomes real.
@@survivorgamer2447" shut your mouth" what nice!:D Gamer, go instead learn at least basics of physic. Or play your games un do not comment things you do not understand
@@valdissafonovs2565 i prefer not to argue with an idiot that don't even research whati i said, such as troy reed. Instead, you only rant and you will stay skeptical for the rest of you life.
@Fred Bloggs ~NEVER FORGET "BREAKING THE CHAINS" HEROES~ The evil power cartel have gone to endless lengths of crime, & false propaganda, major media, school/college manipulation, to stop you from knowing the truth... These AMAZING, BRILLIANT, "think outside of the (power-grid) box" minded geniuses, have ALL tried waking the WORLD up! ...plus many more.. ~Nicola Tesla, Stanley Meyers, Dennis Reed, Troy Reed, Paul Pantone, John Christy & Lou Britz, Joe Newman, John Bedini, Howard Johnston, Richard Clem, Daniel Dingel, John Searl, Thomas Ogle, Dennis Lee, Eric P. Dollard, Tewari, Adam Trombly, Paramahamsa, Dennis Klien, Parendev McKenzie, Muammer Yildiz.. WAKE UP PEOPLE ! SLAVES N0 M0RE ! ..& a special thanks- Edward Snowden, Julian Assange Please follow link and share, thank you 🙂 petitions.whitehouse.gov/petition/end-slavery-all-humanity-administration-needs-quash-suppression-independent-free-energies Your right to have FR€€~€N€RGl€$ ! Stop being SL∆V€D B¥ TH€ C∆RT€L$. ~PLEASE SIGN PETITION~ I am registered to vote, the reason it ended with only 6 signatures, is because those six I personally followed up on with are friends and family members. .. it is THAT controlled. The controllers of our internet are vested with the same ones that control our mainstream media. The ONLY way that we can accomplish this is to go door-to-door get addresses and signatures, and give them our emails in case they change addresses. In the short limited time frame that they give us 100,000 signatures in 30 days, to come up with ridiculous numbers in the amount of time before it's even VIEWABLE to others "which they control", it is the ONLY way for us,,- to go door-to-door and collect signatures so at a specific time frame we can present it to Congress & and DEMAND.
I wish you much success.. In this project of yours, you have made several mistakes due to which the engine cannot work... 1 gauge of magnets 2 inclination of perpendicularity of magnets, etc I am personally developing something similar on the principle of magnets Sincerely
I am a fan of results but what i love more that result is knowing what you are doing and what i value more than that is hardwork , I love this video , I just wish it was more like how to do it at home
बहुत सारी चीजों के बारे में मेरी कल्पना में आतीं हैं जिसे मैं पैसे कीकमीसेकरनहीसकाआजजबउसी कार्य को जब किसी को करते देखता हूं तो मुझे बड़ी खुशी वहैरानीहोतीहै। किमेरातजुर्बाइन्हे कैसे मिल गया।
The most interesting part was towards the end you had mentioned something like 'you could get it spinning for roughly 15 seconds until you'd have to apply force again'. I was thinking, what if you had one or a few magnets on your outta wheel slightly larger to generate more magnetic force on your inner wheel to keep the motion on-going?
the point is that his device doesnt any power, so it just slows down due to friction if he would take out all magnets, he would also be able to spin it for 15s
@@MrZauberwuerfel I've seen similar models except one with a spring-loaded arm that has magnets pointing the other way (meaning after an entire rotation, force is automatically applied again) allowing you to remove the need for a person to spin it. I believe infinite power is possible through perpetual motors...but it's the minds of others that are finite that help prevent it from moving forward. Every breakthrough in history has always had a mob of people saying "it'll never happen" or "it's impossible". Time is the only real obstacle in the way of this breakthrough
It's the answer ! Those gays are debunkers... But there will always be those who believe in this bullshit to discredit these forces of attraction and repulsion. It's all just deliberately misapplied, or they're idiots.
Great !!! Seems it will work if you correct 3 mistakes. One : You divide the stator in to 20 places and the rotor in to 17 places ; it is wrong . calculate it again , I am sure you will find the correct division. Two : It is enough to have two disks of rotor and stator. Three : Calculate again the angle between to disks (yours is a large angle , depends to the number one). And seems i will make one for my self. thanks again . It was a good one on youtube .
Brilliant effort my friend! Electric motors use exactly the same motive force as magnetism so there HAS to be a way of creating a motor with nothing more than magnets. Just because we haven't done it yet doesn't mean it can't be done. 👍
the thing is that in the history of physics we have never ever found a closed system where the combined energy in the system changes therefore i find it highly unlikely, that a simple arrangement of magnets could change that fact
@@MrZauberwuerfel Exactly. The problem of magnetic motors is the first and last magnet, between which there is always a dead point. In addition, the configuration of the magnetic ring with its fields always creates a single magnet (possible shielding of the magnets contributes to the same). The electric motor "can" turn on suitable coils, so it is a controlled "magnet" and does not close in a circle - a rotating magnetic field is created, which is not possible with neodymium or cobalt magnets. It is possible to break the dead center with energy, but the torque would be insignificant and again it would not be a perpetuum mobile.
good you are one step on the path...Now the rotor is built but cutting no copper coils and the interior poles are not being used so the design is flawed if you get this let me know so we can talk
great effort that you put in, however what is needed to explore the potential on this design is to be able to dynamically adjust(while the motor is spinning) the offset angle between the three rows of magnets - I think it is all down to timing. Another person commented below that 20 degrees should be used, but even if this is a working number it would be great to be able to tune this variable while the motor is running.
One disc alone will get stuck. The two other discs are there to pull it past the "stuck".They are offset. I still believe it could work ,but I am not going to build it. Good work.
Que maravillosas ideas ojala las promoverán en el mundo para que ya no aya contaminación de mi nanas en containers rifer congratulecion por tan avanzada tecnologia
Valve actuation. Rotate the magnets in the mast in on off positions.. You can start hyper inneficient and use a microcontroller to work out mechanical actuation dynamics..
what about the angle and the shape of the magnets, you had the plane to put them in angle but you placed them straight, thats reppeling inwards and does not help to puch the stator around.
Est-ce possible de combiner avec des hautes et basses fréquences,vue que les sons vibres à l infini? J suis pas du tout experte dans ce domaine,je posais la question 😉
Generell ist dieser Aufbau plausibel und gut ausgeführt aber ein kleiner Fehler ist zu sehen die magnetischen seitenkräfte wurde in den Bohrungen nicht abgeschirmt somit bremst sich die Konstruktion selbst und der gewünschte abstoß Effekt bleibt aus . schöner ansatz
I understand a magnetic motor will stop at some point but if you can use a small motor to restart it when it stops why won't that work.and how long will a magnetic motor run before it stops and why cant you convert that to a flywheel and then a clutch that spins a alternator or something
Even though a magnet has a pull, or pull, if it attracts, then it repels. The state is completely in balance. But the free energy is still real: energy-medicine-blog.blogspot.com/2020/11/how-to-make-homemade-generator-with-magnets.html ... the method won't use the fourth graders' approach.
hello , just aska something....please tell me the magnet in motor ( axial) is the same in the ring ..ex. north and north or north and south???????????? .... thank you
Good build dude that looks nice. However I do recommend figuring out how to get it to go without stopping. I suggest configuring the flanges or flywheels whatever you want to call it off set a little bit from each other so that way the magnets are not in a straight line and the magnets on the wheels should be at an angle as well. slightly stagger the wheels it's not a slot machine.
good evening, sorry for the question but can anyone tell me if this engine runs perpetually or maintains a constant speed of about 15 seconds and then stops? many thanks in advance.
Simple question, why does it stops after a few seconds? I saw the other guy saying that it's just a flywheel, I understand what he means, but why physically it cannot work and just continue to spin once you start it?
LeCoureurDesBois the motor itself is basically an equilibrium of forces. You have to pay attention that a magnetic field acts in all directions. For this reason there is a force draging the running motor into the direction of inertia but there is also a basically equal force pulling it back to the last magnet which just was passed.
I saw people who made the engine like you from a plastic that did not work and people who made it from aluminum, and it worked ! I think that aluminum weakens one side of the magnet or something like that?
I didn't realize it was a magnet motor, as in ONLY magnet motor. I thought it was going to be a brushless motor. Anyway, it's not a waste of $1k yet. You have the makings of 2 very big motors, an inrunner and outrunner, assuming the magnets are laid out and numbered in a way to match up to coils. Or a generator, assuming you figure out how to keep the plastic from melting. Ooh! An induction water heater! Wrap some copper tube around it! Or maybe use it as some kind of magnetic coupling? Who am I kidding? I'm just trying be be optimistic. Nevermind.
Колёса должны быть со смещением магнитов одного колеса, относительно другого, а у вас магниты стоят в одну линию на всех колёсах, параллельно оси вращения. . Одно колесо, само по себе, работать не будет. Соответственно, и три колеса в такой же параллельной конфигурации, работать не будут. Только со смещением. Колёса работают в симбиозе друг с другом на одном валу. Только тогда это будет единой конструкцией. -- Любое устройство, требует настройки. А вы собрали, три параллельных нерабочих колеса, без настройки. Это у вас, набор запчастей. Сместите второе и третье колесо, на половину магнита, как в кодовом замке на дипломат кейсе.
To get a magnetic motor with free energy, you need to know how to use combined gravity. However, that is not the way to go. By understanding Ether and the field field (without particles), you will make a shorter path. Check it out: energy-medicine-blog.blogspot.com/2020/11/how-to-make-homemade-generator-with-magnets.html It is part of the cosmic symphony (AC generator)
the magnets should go with mixing on the stators, each row with zdvig relative to the next one third and then everything works there are the same schemes
I guess im asking randomly but does anybody know of a method to log back into an instagram account?? I was dumb forgot the login password. I appreciate any help you can give me!
@Xander Kashton Thanks so much for your reply. I got to the site through google and I'm trying it out now. Takes quite some time so I will get back to you later when my account password hopefully is recovered.
Good machining ...To keep the rotation moving add a 5 lb. flywheel ( brass ) to the rotating cylinder ...Then machine spacers the exact length needed drill and ream for the threaded rod and then assemble.. Good luck with Version 2
You need to keep the stator at properly distance from the rotor, you made too close. And the stator as well needs to be mobile, like you can control the distance between it than the rotor. And the majority magnets should be repelling and just fewer needs to be attracting each other. There’s a guy in Brazil that make it works with trash materials. So you’re amazing making with high quality material just need more research and study. Good luck. Looking forward to see you getting there 🙏🏼
You need a 20 degree offset to the pattern of magnets across the 3 rotors like in the Pendelv motor. It is necessary to keep it moving? Did this one work any longer than 15 seconds?
I think the magnets are supposed to act on top of any momentum that the inner disks may have. The magnets are supposed to counteract any resisting force against the momentum of the disks so that they just keep on spinning. An Object in Motion Stays in Motion. The problem is that there are natural forces acting against the spinning disks. The Earth's atmosphere, Earth's gravity and the friction of the shaft spinning inside the frame. All these things will slow it down. The magnets are supposed to counteract all of that. Also, the magnets have no system in place for stopping them from acting against the momentum of the spinning disks. This is because the magnets are given enough time and space to "face each other", giving them a chance to pull the shaft in the opposite direction. This is doesn't happen for very long but it happens for just long enough to interrupt the cycle. As well as the fact that he's not using ball-bearings to facilitate the shaft's rotation. Basically what we have here is a cardboard boat in a bathtub. It floats, as long as it doesn't get "too" wet.....
Jim, could you make one for me plz. I d do anything to have one of these but I am not a mechanical person. I ll pay materials, dev time and shipment cost. plz!!
actually if you could get the out side ring of magnets to flip via a geared setup , so they rotate with the inside rotor, you might get around the problem, but as I see it, it takes energy to move the inside magnet passed the outside magnet and once it passes it gets a push ie every action has an equal and opposite reaction nothing is free, or so it would seem. But if you could turn down the magnetic power of a solid state magnet, and build a timing device that turned the magnets off and on for free. then you might make a free energy device or over unity device.
I have an idea for a lifting force machine. Step 1: Get hollowed out cube. Step 2: Securely attach magnet to inner bottom of hollowed out cube. Step 3: Place a lever on inside bottom of cube behind the magnet thats securely attached to inside bottom of cube so that one side of the lever is pointing towards you and hanging over the magnet. Step 4: Attach a vertical bar to the top side of the part of the lever that is not hanging over magnet witch is securely attached to inner bottom of cube. Make sure the bar goes all the way up to the inner top of the cube barley touching it. Step 5: Securely attach a magnet to the side of the lever that is hanging over the magnet that is attached to the inner botttom of cube. Note: Magnets need to be facing each other with attracting poles N,S or S,N Note: The lever is going to have to be realy close to the magnet on inner bottom of cube because of how close those magnetic fields need to be to interact. But not so close that magnets can touch. The magnet on top connected to lever is pulling the magnet on inner bottom of cube towards it and since the magnet on inner bottom of cube is connected to cube, this pulling force acts as a lifting force. Now at the same time the magnet on inner bottom of cube is pulling the magnet on top downwards BUT the magnet on top is connected to the lever so any downwards pulling force is being converted mechanicaly by the lever into upwards lifting force. Now if you know anything about magnets you now that there are magnets powerfull enough to lift far more weight then just there own. So essentialy this divice is exploiting the powerfull pulling force of magnets by mechanicaly transforming its magnetic pulling force into mechanical lifting force through the clever utilization of a lever, and walla stuff can be made to fly. Imagine if the magnets in this experiment where electro magnets so the ammount of electrical current going into them determined the ammount of lifting force that it would have. Now imagine this system being used as an attachment that could be placed under or ontop of vehicles to counter the weight of the vehicle and any cargo its carying. Now imagine if this was done with powerfull permanent magnets and turned sideways and placed in an electric generator and had enough strength to pass through the magnetic fields as it propelled itself forwards with its own magnetic pulling force. -Signed AMA-
A solução é simples: as bases precisam ser condutoras. Por exemplo o Alumínio. Então saibam essa questão: - O que é um ímã? - É um catalisador de íons. Um catalisador é como um balde sempre cheio de água numa cachoeira. Você sequestra íons de um ímã, gerando a eletricidade, e ele os recupera do ambiente, e/ou da carga, e por isso 2 fios são necessários numa ligação elétrica. Enfim a necessária carcaça metálica age como antena, que capta os elétrons em pauta.
I would have gone with around a 33 degree angle on the magnets and altered one magnet on the stater to disrupt the cogging either set it as a south instead of north or change it to a different design i think the answer lies in altering one of the stater magnets
Think what you like. It's never worked for very good reasons. People have tried since the dawn of man to get reality to conform to their delusional beliefs, and it hasn't happened yet.
im not sure what you mean by that magnetic motors do not work. in refrigeration theres a new technology by turbocore i believe that use this principle for their motors. very low starting amp motors.
Very good my friend. The stator should have magnets set at 21 degrees off axis in a north south alternating configuration. Each Stator rotor plate should be off set from one another 17 degrees. The spindle should be free floated in a mag lev gate for rotor. You will need power plates with magnets and a super conductive coil. I won't share the clutch mechanism, however you need a start motor to spin the rotor up to 3000 RPM, disengage it from the spindle. Watch the power out. Then reengage spindle and spin to 6000 RPM, then 9000 and so forth to 20000rpm. Watch the power output. You will need a smart controller, rpm sensors and some other kit. Enjoy
great work, you achieved the same exact level of performance as every other motor without a power source in history. state of the art at first try.
Exactly.
Nice job bro!
In my opinion the magnet have to work not in attraction... You have to displace N vs N and S vs S, and the magnet on stator have to be pair and in rotor dispair (or vice versa) for example: 8 in rotor and 9 in stator make this attempt with only 1 disk if it work you can do the same job with other 2 disks and couple the other disks all together.
Pay maximum attention to the distance BTW stator and rotor magnets is important because can influence the magnetic field each other.
Another attempt you can do is to positioning rotor not completely inside stator and make a distance of 1 o 2 mm BTW magnet axes that can improve the repulsion force BTW magnets.
You have machine for build any prototype you can make more try... Please don't abandon you're magnetic motor dream!
Thanks for show us your job bro.
Another suggestion coul be to use neodimium magnets more Long in stator minimum double but better triple (just put another one in series) because in this way you'll have more distance between magnet's pole and avoid magnetic influence VS stator magnets.
@@flaviop.3938 yes in the rotor, and on the stator you can use pot magnets that come with their own shielding
ua-cam.com/video/H5PXwxY-o4I/v-deo.htmlsi=OTnjA76Evz69O_5y
Сколько труда,вложения,встречи с победой. В конце результат по 0.Лайк большой за работу.👍👍👍👏
Great job man 👍 world needs people like you who experience new ideas even if it doesn't work. Thanks for sharing.
Cyrus
Waisting time and materials...
BUT. Maybe fo those " wishful thinking"
@@valdissafonovs2565 Troy reed made car and other machines with natural magnets, but he was destroyed or killed or disappeared, who knows. why u insist this is not possible? You waste words saying "impossible", and talking too soon. Even elon musk said something related to the fact that everyone said his ideals are impossible like go to mars or whatever. And he reached to make vertical landing rockets which also it was rumored to be ridiculous and impossible "before it was made".... until he reached to do it real. Why don't you not shut your mouth and just watch how this concept of magnet motors becomes real.
@@survivorgamer2447" shut your mouth" what nice!:D
Gamer, go instead learn at least basics of physic.
Or play your games un do
not comment things you do not understand
@@valdissafonovs2565 i prefer not to argue with an idiot that don't even research whati i said, such as troy reed. Instead, you only rant and you will stay skeptical for the rest of you life.
@@survivorgamer2447 keep dreaming imbecil:D:D.
Magnet motor:D
Flat earth: D
I am very proud and appreciate your work.
I really admire your honesty and hard work.
this is real science without any tricks.
Nonsense
Singer - Awww. Reality is a bitch.
I get it. You don’t really want it to work. Then you’re a success, lol
excellent skills and really running 15 sec at constant speed is an achievement! congrats
Fred Bloggs so ur saying that there is no magnet motor that constant moving?
@Fred Bloggs ~NEVER FORGET "BREAKING THE CHAINS" HEROES~
The evil power cartel have gone to endless lengths of crime, & false propaganda, major media, school/college manipulation, to stop you from knowing the truth...
These AMAZING, BRILLIANT, "think outside of the (power-grid) box" minded geniuses, have ALL tried waking the WORLD up!
...plus many more..
~Nicola Tesla, Stanley Meyers, Dennis Reed, Troy Reed, Paul Pantone, John Christy & Lou Britz, Joe Newman, John Bedini, Howard Johnston, Richard Clem, Daniel Dingel, John Searl, Thomas Ogle, Dennis Lee, Eric P. Dollard, Tewari, Adam Trombly, Paramahamsa, Dennis Klien, Parendev McKenzie, Muammer Yildiz..
WAKE UP PEOPLE ! SLAVES N0 M0RE !
..& a special thanks-
Edward Snowden, Julian Assange
Please follow link and share, thank you 🙂
petitions.whitehouse.gov/petition/end-slavery-all-humanity-administration-needs-quash-suppression-independent-free-energies
Your right to have FR€€~€N€RGl€$ !
Stop being SL∆V€D B¥ TH€ C∆RT€L$.
~PLEASE SIGN PETITION~
I am registered to vote, the reason it ended with only 6 signatures, is because those six I personally followed up on with are friends and family members. .. it is THAT controlled. The controllers of our internet are vested with the same ones that control our mainstream media. The ONLY way that we can accomplish this is to go door-to-door get addresses and signatures, and give them our emails in case they change addresses. In the short limited time frame that they give us 100,000 signatures in 30 days, to come up with ridiculous numbers in the amount of time before it's even VIEWABLE to others "which they control", it is the ONLY way for us,,- to go door-to-door and collect signatures so at a specific time frame we can present it to Congress & and DEMAND.
I wish you much success..
In this project of yours, you have made several mistakes due to which the engine cannot work...
1 gauge of magnets
2 inclination of perpendicularity of magnets, etc
I am personally developing something similar on the principle of magnets
Sincerely
I am a fan of results but what i love more that result is knowing what you are doing and what i value more than that is hardwork , I love this video , I just wish it was more like how to do it at home
Do you have the plans of the motor ? Or how she cans find it ?
Good work you are the only one who made it . Really good
बहुत सारी चीजों के बारे में मेरी कल्पना में आतीं हैं जिसे मैं पैसे
कीकमीसेकरनहीसकाआजजबउसी
कार्य को जब किसी को करते देखता हूं तो मुझे बड़ी खुशी वहैरानीहोतीहै।
किमेरातजुर्बाइन्हे कैसे मिल गया।
The most interesting part was towards the end you had mentioned something like 'you could get it spinning for roughly 15 seconds until you'd have to apply force again'.
I was thinking, what if you had one or a few magnets on your outta wheel slightly larger to generate more magnetic force on your inner wheel to keep the motion on-going?
the point is that his device doesnt any power, so it just slows down due to friction
if he would take out all magnets, he would also be able to spin it for 15s
@@MrZauberwuerfel I've seen similar models except one with a spring-loaded arm that has magnets pointing the other way (meaning after an entire rotation, force is automatically applied again) allowing you to remove the need for a person to spin it.
I believe infinite power is possible through perpetual motors...but it's the minds of others that are finite that help prevent it from moving forward.
Every breakthrough in history has always had a mob of people saying "it'll never happen" or "it's impossible". Time is the only real obstacle in the way of this breakthrough
👍!Metal and Vismyt?...
I like this project, I don't have all these tools but I feel with some improvements that can work
You need to shield 25% of the inner magnets so the attracting force of the outer magnets don’t cancel the the repellant drive force👍
It's the answer ! Those gays are debunkers...
But there will always be those who believe in this bullshit to discredit these forces of attraction and repulsion. It's all just deliberately misapplied, or they're idiots.
Does it blend?
Great !!!
Seems it will work if you correct 3 mistakes.
One : You divide the stator in to 20 places and the rotor in to 17 places ; it is wrong . calculate it again , I am sure you will find the correct division.
Two : It is enough to have two disks of rotor and stator.
Three : Calculate again the angle between to disks (yours is a large angle , depends to the number one).
And seems i will make one for my self.
thanks again .
It was a good one on youtube .
even with your proposed changes it wont work
have you made one yet?
Looks great. Doesn't matter it works or not 😀 Atleast you tried
Brilliant effort my friend! Electric motors use exactly the same motive force as magnetism so there HAS to be a way of creating a motor with nothing more than magnets. Just because we haven't done it yet doesn't mean it can't be done. 👍
the thing is that in the history of physics we have never ever found a closed system where the combined energy in the system changes
therefore i find it highly unlikely, that a simple arrangement of magnets could change that fact
@@MrZauberwuerfel Exactly. The problem of magnetic motors is the first and last magnet, between which there is always a dead point. In addition, the configuration of the magnetic ring with its fields always creates a single magnet (possible shielding of the magnets contributes to the same). The electric motor "can" turn on suitable coils, so it is a controlled "magnet" and does not close in a circle - a rotating magnetic field is created, which is not possible with neodymium or cobalt magnets. It is possible to break the dead center with energy, but the torque would be insignificant and again it would not be a perpetuum mobile.
good you are one step on the path...Now the rotor is built but cutting no copper coils and the interior poles are not being used so the design is flawed if you get this let me know so we can talk
great effort that you put in, however what is needed to explore the potential on this design is to be able to dynamically adjust(while the motor is spinning) the offset angle between the three rows of magnets - I think it is all down to timing. Another person commented below that 20 degrees should be used, but even if this is a working number it would be great to be able to tune this variable while the motor is running.
This is my approach
One disc alone will get stuck. The two other discs are there to pull it past the "stuck".They are offset. I still believe it could work ,but I am not going to build it. Good work.
2.5m views. Monitized by youtube, I'd say it works just fine.
@@KevinSmith-os5yz lol ,yes.
I m studying engineering..I want to do magnet as my project so please send me this motor design. N it's dimensions.
Que maravillosas ideas ojala las promoverán en el mundo para que ya no aya contaminación de mi nanas en containers rifer congratulecion por tan avanzada tecnologia
WHAT IS THE PRACTICAL USAGE OS THIS DEVICE ?
Valve actuation. Rotate the magnets in the mast in on off positions.. You can start hyper inneficient and use a microcontroller to work out mechanical actuation dynamics..
what about the angle and the shape of the magnets, you had the plane to put them in angle but you placed them straight, thats reppeling inwards and does not help to puch the stator around.
Türklerin bir yaptığı videoyu ingilizce al yazılı izliyorum :) elinize sağlık kanalınızı yeni keşfettim güzel içerikler hazırlıyorsunuz.
Energy always has an origin. People have to stop believing that there is such a thing as a free lunch.
Notth south magnetic pole staggered position for the magnets. Are you selling the not working one .?
Could it be some type of frictionless bearing?
The most honest guy!
Est-ce possible de combiner avec des hautes et basses fréquences,vue que les sons vibres à l infini?
J suis pas du tout experte dans ce domaine,je posais la question 😉
thank for your video, I will making try it.... but Ineed detail for diametre for chasing magnet. ..
Complimenti per il prototipo. Hai dei disegni per poter realizzare questo bellissimo progetto? Grazie anticipatamente se puoi fornire i disegni.
have you tried with angled cut magnet and magnetic shielding? some say it work but without actual try it still a dream
I think this more levitation and less propulsion,dont give up.you get this to work and skys the limit!!!
what kind of plastic material you used sir? Thanks
POM, Acetal
@@revocnc can you send me a link where you bought the magnets? thanks
Will it run with out stopping for ever?
no
How to get or order this type of magnet ,I want to make one by myself
Generell ist dieser Aufbau plausibel und gut ausgeführt aber ein kleiner Fehler ist zu sehen die magnetischen seitenkräfte wurde in den Bohrungen nicht abgeschirmt somit bremst sich die Konstruktion selbst und der gewünschte abstoß Effekt bleibt aus . schöner ansatz
👍!Висмут и Железные гильзы?Metal and Vismyt?
The most accurate title for a video so far!
I understand a magnetic motor will stop at some point but if you can use a small motor to restart it when it stops why won't that work.and how long will a magnetic motor run before it stops and why cant you convert that to a flywheel and then a clutch that spins a alternator or something
If you need any help in the future, I can make a lot of things that do not work, including a few marriages.
LOL
Even though a magnet has a pull, or pull, if it attracts, then it repels. The state is completely in balance.
But the free energy is still real: energy-medicine-blog.blogspot.com/2020/11/how-to-make-homemade-generator-with-magnets.html ... the method won't use the fourth graders' approach.
😂😂😂😂
Haha.. I like to experiment, is a hobby of mine.
Put it on eBay.. let me know if you are interested? Thanks
Hi
sr ye megnet kha se prchej kr skte he
hello , just aska something....please tell me the magnet in motor ( axial) is the same in the ring ..ex. north and north or north and south???????????? .... thank you
Similar to this: assets.pinshape.com/uploads/image/file/38730/perendev-magnet-motor-with-generator-3d-printing-38730.jpg
ohhhh thank you ..can you send me more plans of your project , best regards
WOW...great work.
if this motor use dc pulse motor as driver, you can increase the efficiency comparing with conventional dc motor.
good music, 9:33 The shaft has been spun, now take the energy!
How i want to buy this motor
halo saya suka vidionya hanya yang saya mau tanya apa sudah di coba sama dinamo??
Good build dude that looks nice. However I do recommend figuring out how to get it to go without stopping. I suggest configuring the flanges or flywheels whatever you want to call it off set a little bit from each other so that way the magnets are not in a straight line and the magnets on the wheels should be at an angle as well. slightly stagger the wheels it's not a slot machine.
Aya kaha miliga
If it doesn't work, what's the use making it?
Does any body know what size are the magnets he uses in this project?
Esta al final del vídeo...
Nice work. For this Perendev motor to work you need the tiny secret that makes the un-balance. Your motor is balanced so it stops.
Kahan par milega ye sar
hello, how many kva does it generate current?
Sir magnet ka pta kesay chlay ga N kon sa or S kon sa hay plz
good evening, sorry for the question but can anyone tell me if this engine runs perpetually or maintains a constant speed of about 15 seconds and then stops? many thanks in advance.
it doesnt work
its basically a flywheel, that just loses rpm due to friction
Cái này có ai bán ko.. Mình cần tìm mua
Very nice 👍🏼
I like it
Would you sale it?
can I know what grade of Neo magnets that you used? also I want to know what is the rotation value of the rotor? thanks in advance
Listen bilquess sister...watsapp me on 00923132804472
Where can I buy it? Do you plan to build a not working version 2.0?
Simple question, why does it stops after a few seconds? I saw the other guy saying that it's just a flywheel, I understand what he means, but why physically it cannot work and just continue to spin once you start it?
LeCoureurDesBois the motor itself is basically an equilibrium of forces. You have to pay attention that a magnetic field acts in all directions. For this reason there is a force draging the running motor into the direction of inertia but there is also a basically equal force pulling it back to the last magnet which just was passed.
Fiction, gravity, vibration etc.
Enventually it would slow down an the magnets would find spot where they would be in equilbrium
I saw people who made the engine like you from a plastic that did not work and people who made it from aluminum, and it worked ! I think that aluminum weakens one side of the magnet or something like that?
Try to make magnet not facing together if its repulsion is in inclined position its posible.. please just try a little inclined on it..
There is a cable under the left arm and the poles contact with fingers you can see.
Will it work with a Bindi concept
U made a video of the long work of a none workin magnet motor? Sry i dont get what the point of this video is
We told to students and their teacher that this device would never work, but they wanted us to do.
I didn't realize it was a magnet motor, as in ONLY magnet motor. I thought it was going to be a brushless motor. Anyway, it's not a waste of $1k yet. You have the makings of 2 very big motors, an inrunner and outrunner, assuming the magnets are laid out and numbered in a way to match up to coils. Or a generator, assuming you figure out how to keep the plastic from melting. Ooh! An induction water heater! Wrap some copper tube around it! Or maybe use it as some kind of magnetic coupling? Who am I kidding? I'm just trying be be optimistic. Nevermind.
Maybe he did this for crowdfunding to get money for something that don’t work (yet).
Слишком много деталей
it does seem like an awfull lot of work and expence to go through to make something with such poor performance.
Колёса должны быть со смещением магнитов одного колеса, относительно другого,
а у вас магниты стоят в одну линию на всех колёсах, параллельно оси вращения. .
Одно колесо, само по себе, работать не будет.
Соответственно, и три колеса в такой же параллельной конфигурации,
работать не будут.
Только со смещением.
Колёса работают в симбиозе друг с другом на одном валу.
Только тогда это будет единой конструкцией.
--
Любое устройство, требует настройки.
А вы собрали, три параллельных нерабочих колеса, без настройки.
Это у вас, набор запчастей.
Сместите второе и третье колесо, на половину магнита,
как в кодовом замке на дипломат кейсе.
Wouldn't it have been easier to build one that works? ;)
@@rtfacts5317
Yes, even his name and certificate of birth disappeared! Nobody remembers him anymore! Or do you?
To get a magnetic motor with free energy, you need to know how to use combined gravity. However, that is not the way to go. By understanding Ether and the field field (without particles), you will make a shorter path. Check it out: energy-medicine-blog.blogspot.com/2020/11/how-to-make-homemade-generator-with-magnets.html It is part of the cosmic symphony (AC generator)
@@rtfacts5317 Governments should keep some things to enslave us
هل استطيع شراء مثل هذا المحرك المغناطيسي
the magnets should go with mixing on the stators, each row with zdvig relative to the next one third and then everything works there are the same schemes
I guess im asking randomly but does anybody know of a method to log back into an instagram account??
I was dumb forgot the login password. I appreciate any help you can give me!
@Kace Cannon instablaster ;)
@Xander Kashton Thanks so much for your reply. I got to the site through google and I'm trying it out now.
Takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Xander Kashton it did the trick and I now got access to my account again. I am so happy!
Thanks so much you really help me out!
@Kace Cannon Glad I could help xD
Good machining ...To keep the rotation moving add a 5 lb. flywheel ( brass ) to the rotating cylinder ...Then machine spacers the exact length needed drill and ream for the threaded rod and then assemble.. Good luck with Version 2
Do it yourself
Have you calculatet the treadet Rods? There are Not made of stainles steel.
where did you buy the POM(acetal) ? pls and thank you
You need to keep the stator at properly distance from the rotor, you made too close. And the stator as well needs to be mobile, like you can control the distance between it than the rotor. And the majority magnets should be repelling and just fewer needs to be attracting each other. There’s a guy in Brazil that make it works with trash materials. So you’re amazing making with high quality material just need more research and study. Good luck. Looking forward to see you getting there 🙏🏼
are you sure with the polarity of your magnets?
good job, how much is this machine, and you can buy
You need a 20 degree offset to the pattern of magnets across the 3 rotors like in the Pendelv motor. It is necessary to keep it moving? Did this one work any longer than 15 seconds?
ma kra What do you mean? It just needs a 20 degree offset! Well, that and something to spin it. Maybe a hamster?
Or a 0 degree offset can be spun by a hamster just as well. It's just a flywheel. The magnets don't really do anything in the end.
I think the magnets are supposed to act on top of any momentum that the inner disks may have. The magnets are supposed to counteract any resisting force against the momentum of the disks so that they just keep on spinning. An Object in Motion Stays in Motion. The problem is that there are natural forces acting against the spinning disks. The Earth's atmosphere, Earth's gravity and the friction of the shaft spinning inside the frame. All these things will slow it down. The magnets are supposed to counteract all of that.
Also, the magnets have no system in place for stopping them from acting against the momentum of the spinning disks. This is because the magnets are given enough time and space to "face each other", giving them a chance to pull the shaft in the opposite direction. This is doesn't happen for very long but it happens for just long enough to interrupt the cycle.
As well as the fact that he's not using ball-bearings to facilitate the shaft's rotation.
Basically what we have here is a cardboard boat in a bathtub. It floats, as long as it doesn't get "too" wet.....
kek? What do you think this is? World of warcraft?
Use google translate, otherwise don't even bother speaking.....
Jim, could you make one for me plz. I d do anything to have one of these but I am not a mechanical person. I ll pay materials, dev time and shipment cost. plz!!
que material uso donde van los imanes?
Te faltó el ángulo en la armadura.
i wana buy this
Two kw current maginent motor How many Price pls sully india reply
actually if you could get the out side ring of magnets to flip via a geared setup , so they rotate with the inside rotor, you might get around the problem, but as I see it, it takes energy to move the inside magnet passed the outside magnet and once it passes it gets a push ie every action has an equal and opposite reaction nothing is free, or so it would seem. But if you could turn down the magnetic power of a solid state magnet, and build a timing device that turned the magnets off and on for free. then you might make a free energy device or over unity device.
Is this hand motor or what?
How small induction back into stator with ocilation and permanent magnet field winding
ok, where to buy the motor??????
quanto custa uma peça dessa.
May i get this one to online?
I want to buy this?
How much this?
have you ever heard of a 3d printer tryed that for the rotoverter doesnt work without mu-metal spacers do
I have an idea for a lifting force machine.
Step 1: Get hollowed out cube.
Step 2: Securely attach magnet to inner bottom of hollowed out cube.
Step 3: Place a lever on inside bottom of cube behind the magnet thats securely attached to inside bottom of cube so that one side of the lever is pointing towards you and hanging over the magnet.
Step 4: Attach a vertical bar to the top side of the part of the lever that is not hanging over magnet witch is securely attached to inner bottom of cube. Make sure the bar goes all the way up to the inner top of the cube barley touching it.
Step 5: Securely attach a magnet to the side of the lever that is hanging over the magnet that is attached to the inner botttom of cube.
Note: Magnets need to be facing each other with attracting poles N,S or S,N
Note: The lever is going to have to be realy close to the magnet on inner bottom of cube because of how close those magnetic fields need to be to interact. But not so close that magnets can touch.
The magnet on top connected to lever is pulling the magnet on inner bottom of cube towards it and since the magnet on inner bottom of cube is connected to cube, this pulling force acts as a lifting force. Now at the same time the magnet on inner bottom of cube is pulling the magnet on top downwards BUT the magnet on top is connected to the lever so any downwards pulling force is being converted mechanicaly by the lever into upwards lifting force. Now if you know anything about magnets you now that there are magnets powerfull enough to lift far more weight then just there own. So essentialy this divice is exploiting the powerfull pulling force of magnets by mechanicaly transforming its magnetic pulling force into mechanical lifting force through the clever utilization of a lever, and walla stuff can be made to fly. Imagine if the magnets in this experiment where electro magnets so the ammount of electrical current going into them determined the ammount of lifting force that it would have. Now imagine this system being used as an attachment that could be placed under or ontop of vehicles to counter the weight of the vehicle and any cargo its carying. Now imagine if this was done with powerfull permanent magnets and turned sideways and placed in an electric generator and had enough strength to pass through the magnetic fields as it propelled itself forwards with its own magnetic pulling force. -Signed AMA-
A solução é simples: as bases precisam ser condutoras. Por exemplo o Alumínio.
Então saibam essa questão:
- O que é um ímã?
- É um catalisador de íons.
Um catalisador é como um balde sempre cheio de água numa cachoeira. Você sequestra íons de um ímã, gerando a eletricidade, e ele os recupera do ambiente, e/ou da carga, e por isso 2 fios são necessários numa ligação elétrica. Enfim a necessária carcaça metálica age como antena, que capta os elétrons em pauta.
you forgot to pray to the tooth fairy to make it works
I need this is magnetic. I wanna buy this. Do you have this magnetic?
nice..how about price?
I would have gone with around a 33 degree angle on the magnets and altered one magnet on the stater to disrupt the cogging either set it as a south instead of north or change it to a different design i think the answer lies in altering one of the stater magnets
Think what you like. It's never worked for very good reasons. People have tried since the dawn of man to get reality to conform to their delusional beliefs, and it hasn't happened yet.
im not sure what you mean by that magnetic motors do not work. in refrigeration theres a new technology by turbocore i believe that use this principle for their motors. very low starting amp motors.