W126 Mercedes-Benz S-Class Coolant Flush.
Вставка
- Опубліковано 23 сер 2024
- How to do a complete coolant flush without removal of engine block drain plugs.
on a W126 (S Class) Mercedes-Benz. Remove all old coolant/antifreeze and replacing it with phosphate free formula.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Dain Plug part number 000-501-01-71 (Optional)
Coolant/Antifreeze Zerex G05
Distilled Water
Radiator Flush Cleaner (Optional)
----------------------------------------------------------------------------------------------------------------------------------------------------------
View my Channel / @ka-benz
-----------------------------------------------------------------------------------------------------------------------------------------------------------
#w126 #v126 #mercedes_benz
Great job! I done this before, the same way, and it does take a long time to get all the coolant flushed out. Surprised you stuck with it so long, but that's what it takes. Beautiful W126, btw!
Thank You.
Matey so glad I found you!
Thank You.
Great upload
Thanks.
Good job
I’m At 11 drains and it’s still colorful
Make sure your heater and fan are on all the way. It should turn clear at some point.
@@ka-benz Yap. Did that last year tool about 25 Gallons to get it cleared. Filled rad, took car for a ride, turn heat to full and drain. wait for it to get cold and repeat... Beats opening those engine bolts.. Thanks for the great tip
How you know if all water is out before you add Zerex ? Can you add Prediluted instead.
There is still a lot of water in the system and if you use a 50/50 mix you will have to check the temperature range with a anti-freeze gauge for your local protection. I need -35+ so I used concentrated.
@@ka-benz perfect tank you much appreciated. Seems like that will not be option since in my area gets up to -63 F, I guess best bet will be full flush, or mix with current coleant.