Topping D50 III + TOPPING TCT1 TRS Unboxing - Donboxing #46
Вставка
- Опубліковано 9 лип 2024
- Hello there lads and gents!
Today I'm unboxing the Toping D50 III! Toppings latest mid-range DAC as well as its fitting cable the TCT1.
0:00 Introduction
0:29 Topping TCT cable
1:41 Luck is on my side again!
2:05 D50 III unboxing
3:28 Closer look at the D50 III
4:12 Inputs/Outputs
4:34 Accessories
5:34 High-Res excitement!
5:47 Outro
If you have any questions, criticisms, recommendations or any other feedback, please leave a comment.
#topping #dac #cable - Наука та технологія
Won't any mono 3.5mm cable work for trigger? That seems like a necessary convenience factor, I would wait for an all-in-one version otherwise
It would for sure. I did already check my local Amazon but I didn't see a cable that would be as short as I'd need it. Maybe need to check further or maybe Ali or so^^
Anyway, they should have included in in my opinion.
@@don_spektor I haven't used it but it seems like it is the same cable they sell for modular synths, those are normally short but sold in packs
@@AnomieDomine Could you maybe provide me a link? I'm unable to find it.
Much appreciated :-)
My hi end cables just ifi xlr bal cables.. Peace!
I have some absolutely random XLR cables that do the job absolutely fine and without any issues^^
Bist du zufrieden mit der A50 und D50 Kombi? Ich überlege mir diese auch zuzulegen. Wo hast du die eigentlich bestellt? Insbesondere auch das 6,35 Kabel? :)
Hey YoZasuke :-)
Ja bin ich, die werden mein altes Desktop-Setup (SMSL SU8 + SP200) ersetzen.
Das Kabel hab ich direkt vom selben Seller wie den DAC/AMP: Shenzenaudio. Doll finde ich es aber nicht: es ist zu steif und drückt den AMP oben drauf nach oben und zu lang nach hinten, so dass ich den Stack weiter in richtung Tisch-Mitte schieben muss... Laut den Daten des D50/A50 ist Single-Ended via RCA am Ende sogar besser was das SNR angeht, auch wenn du damit etwas weniger Power hast.
Ich hab aber auch ein paar Kritik-Punkte:
- die An-/Aus-Schalter sind etwas "wobbelig"
- die EQ-Applikation am PC wirkt nur für den USB-Input
- man kann den D50 nicht richtig ausschalten
- mein altes Setup klingt etwas dynamischer (sehr subjektiver Eindruck aber es ist mir mit sowohl IEMs als auch Kopfhörern aufgefallen)
- man brauch ein extra USB-C Power-Supply für den D50
- das 12V Trigger-Kabel liegt nicht bei
Abseits davon ist das Setup aber sehr gut:
+ hat mehr als genug Power
+ einen Noise-Floor der selbst bei 12 Ohm @>100dB IEMs tonlos ist
+ die EQ app ist nett und hat sogar Auto-EQ Funktionen
+ Größe der Geräte schön klein
+ Volume-Knob sehr gut
+ Bluetooth funktioniert ohne Probleme mit allesn wichtigen Codecs
+ wird nicht wirklich heiß auch bei höherer Last
Ich werde das komplette Review wahrscheinlich nächste Woche aufnehmen, falls du noch mehr Details möchtest die werden alle in dem Video sein :-)
@@don_spektor Ich danke dir für die ausführliche Antwort! Ich bin am Schwanken zwischen der Topping Kombi und beispielsweise den Atom 2 stack. Wegen den Importkosten lägen die jetzt nicht allzu weit auseinander. Die Balanced Verbindung finde ich halt insbesondere interessant um Erdschleifen vorzubeugen. Ich werde mal weiterüberlegen :D
@@YoZasuke Ja leider ist Atom 2 nicht wirklich sinnvoll wenn man nicht in den USA lebt :/
Und balanced brauchst du normal nicht: Erdschleifen treten in reinen Desktop-Setups kaum auf. Erst wenn du ein Setup mit Lautsprechern hast, dann kann das potentiell relevant werden. Ich zumindest hatte das bisher bei noch keinem Produkt^^