It wasn't easy to explain the characteristics of the motor that I felt while riding with subtitles. So to put it simply, it was a strong and good quality motor. If you plan Mountain E-board as DIY, I recommend this motor that has a huge output and is universal availability in both "torque and speed." flipsky.net/ 라이딩에서 느낀 모터의 특성을 자막으로 설명하기가 어려웠습니다. 그래서 한마디로 표현하자면 정말 괜찮은 모터였습니다. 마운틴 E보드를 DIY로 계획하신다면 강력한 출력으로 토크와 스피드 모두에서 범용성이 좋은 이번모터를 추천합니다. flipsky.net/
I love the way your dog follows you on the board! I wish I could trust my little 8kg Nina to follow me, not wander off into the woods the first time she saw an interesting bird, squirrel, rabbit.
I also enjoyed the test. It was fun to feel the difference between riding and rotating texture as the motor changed :) And my little friend always plays a big part in the video Also, this channel is his~
@@quellcristfalconer9457 Hi, we can do 63100 140KV, just remark in the order note that you need 140KV ,and then we will ship the 140KV to you:bit.ly/3iHqXbS
*Those trails look amazin to ride... but I'd be worried about the board breakin and the zombies catchin up to me.* 😂 I like the street setup but the urethane of the gummies look thin. Another 🔥🔥 video! ⚡🤙🏼🤙🏼⚡
Thank you for the wonderful video and editing style. I'm planning on putting these flipsky 63100 190 kv on my Lacroix Board. I'm also installing the Boardnamics BN M1 AT Gear Drive which you state in your video to not install flipsky 63100 motors on Gear Drives, If I'm understanding correctly? You also said "Impossible to install gear drive mounts because the length is not right"? Is this still the case in 2024 flipsky motors? Boardnamics told me it will work. Maybe BN found a way to adjust to make it work ok? Thank your any help greatly appreciated!
What are your thoughts 2 yrs later in 2024? 500 mile review of the 63100 190kv flipsky motors!?! Also what is your battery size? I wonder how much more torque and top end speed did you get? Some say the longer motors can cause negative issues. Did you discover anything negative? Thank you!!!
That’s such a cute dog.😁 that board is awesome bro. I’ve just ordered the ubox 75v 200amp esc/vesc as one of mine popped . So can’t wait to get riding again. ✌🏼😁
The battery used the Lipo battery as a 12S voltage. The ESC is currently most similar to the one in the link below. I remember the ESC output current was a total of 160A. Thank you for watching. flipsky.net/collections/v6-series/products/flipsky-dual-mini-fsesc6-7-pro-140a-base-on-vesc6-6-with-aluminum-anodized-heat-sink
Are the flipsky trucks alright? I'm looking to DIY my lycaon swift where the only original part is the deck battery, and the enclosures. Was looking into even the flipsky kits (Flipsky Group DIY Electric Skateboard Double Main Shaft Trucks and Motor Kits Dual Drive - 6374 10MM 140KV) where it has the motors, trucks, and cloudwheels already with it and then get a tenka VESC to program it.
I think that even if your battery is Sanyo's 3P battery configuration, the overall discharge rate seems insufficient to be used for the ESC and motor you chose. The most important thing when planning for a DIY or finished product board is the configuration of the battery and the maximum discharge rate of its battery pack. This is because ESC and motor can be determined accordingly. In conclusion, the battery you have cannot fully utilize the performance of the motors and ESC you chose.
Wow man !! 👍 Where to you get most.of your parts from, gears, wheels etc. I have seen your earlier videos, you have done well and progressed well. Well done !!👍👍
I didn't exactly check up on that. But the experience on mountain off-road is that I guess it consumes 10-15% more power than the previous motor 6380/170 4100W. Thanks for always :)
You can reduce the gear ratio. For example, you can reduce the number of teeth in the wheel pulley and increase the number of teeth in the motor pulley.
Thank you for coming bro :) Yeah, It's powerful than 6384, also when I connected it to the same ESC (12s), I felt the texture of the rotation was more delicate and smooth. It was hard to express, but it felt more luxurious.
Yeah, It's powerful than 6374, also when I connected it to the same ESC with battery(12s8p), I felt the texture of the rotation was more delicate and smooth. It is not easy to explain, but it felt more luxurious texture of the rotation.
whats the top speed you ever achieved on e-board? because whats the point of having those sassy motors if you never use what it has to offer... but well... thanks for a review :)
-Motor maximum current is 100A -30Q 18650 1p discharge rate is 15A -Two motors 200 A -So 200A divided by 15A -I think we need more than 13p But it's powerful enough for me to ride even if it's not the maximum performance :) Thanks~
Two of hobbyking.com/en_us/turnigy-high-capacity-battery-6600mah-6s-12c-drone-lipo-pack-xt90.html?queryID=04b11573d5d0c721e5ad64a1228d5fa6&objectID=78433&indexName=hbk_live_products_analytics&___store=en_us It's 12s(44.4v) in series.
글세요. 만약 한국독자만을 위한 채널을 만든다면 올릴 생각이 있어요.(아직까지는 생각만하고있어요) 그리고 제가 가지고 있는 보드중에서는 팔수있는보드도 있긴한데 주문을 하셔서 새롭게 만드는 것은 불가합니다. 취미로만 즐기고있기 때문에 매장을 운영하지는 않습니다. 감사합니다.
다른 영상 살펴봤는데 국내 구독자 비율이 낮긴하더라구요 😭 ㅠ 영상을볼때 해외 잘나가는 유튜버 느낌이 들어서 ㅎㅎ 영어를 잘못하기도 하다만 모터 업그레이드나 휠에 장착된 모터를 빼서 벨트 타입으로 변경할때에 도움될만한 영상이나 그 부품을 구매하기위한 사이트를 추천 받을수있을까요? 역시 영어 잘 못하면 치명적이겠죠? ..ㅋ
hi, i am reading on some forums that flipsky products are highly expiring. is all this true ?. I would like to build my first board and was referring to them for not spending a fortune. what do you suggest me?
Well, I'm still using them well. I don't think there's an answer to choosing parts and there's a bit of luck in picking. I think it's the best way to buy what you like~
Si tiene interes en una salen al rededor de $1000 Dolores la k el ase no las bende, son echos a su gusto. Checkea mi canal yo bendo las cual yo reviews.
Doers and creators have a great respect for people who narrorate their videos and put forth the effort to explain their technique and process for what they are doing in their project. This new standard of silent music filled video is really really annoying, and it shows that to You are lazy an d apparently have no capacity to speak. Gee wiz at least give us subtitles....
It wasn't easy to explain the characteristics of the motor that I felt while riding with subtitles. So to put it simply, it was a strong and good quality motor.
If you plan Mountain E-board as DIY, I recommend this motor that has a huge output and is universal availability in both "torque and speed." flipsky.net/
라이딩에서 느낀 모터의 특성을 자막으로 설명하기가 어려웠습니다. 그래서 한마디로 표현하자면 정말 괜찮은 모터였습니다.
마운틴 E보드를 DIY로 계획하신다면 강력한 출력으로 토크와 스피드 모두에서 범용성이 좋은 이번모터를 추천합니다. flipsky.net/
What remote are you using? Also what deck can you recommend that is also affordable? Thanks you in advance.
I love the way your dog follows you on the board! I wish I could trust my little 8kg Nina to follow me, not wander off into the woods the first time she saw an interesting bird, squirrel, rabbit.
NIcest looking board I've ever seen bro. Beautiful
Thank you for watching :)
This is your best looking board!
I agree :) Thank you for watching !
Wow! The motors are the size of a soda can! Excellent video! 👍🏻
Yeah it is :) Thank you for watching ~
Thanks for wonderful test video, bro. The little cute guy makes video much more funny!🔥🔥
I also enjoyed the test. It was fun to feel the difference between riding and rotating texture as the motor changed :)
And my little friend always plays a big part in the video Also, this channel is his~
Will you guys eventually be making a battle hardened version of your 63100 140kv motor?!
@@quellcristfalconer9457 Hi, we can do 63100 140KV, just remark in the order note that you need 140KV ,and then we will ship the 140KV to you:bit.ly/3iHqXbS
Wow bro that is the best one iv seen yet it's mean as looking I totally love it bro well done
Thank you so much bro :)
모터 소리 들으니까 잠이 솔솔... 새로운 모터 덕에 오랜만에 보는 흰색 몬스터 보드 너무 이쁩니다! 언제봐도 산악 오프로드는 엄청 재밌어 보이네여 이번영상도 잘봤습니다~ 건강 조심하시구 다음 영상도 기다릴게여!
네 항상시청 감사드립니다~ :)
*Those trails look amazin to ride... but I'd be worried about the board breakin and the zombies catchin up to me.* 😂
I like the street setup but the urethane of the gummies look thin. Another 🔥🔥 video!
⚡🤙🏼🤙🏼⚡
You are right. The condition of the road is really important to feel the gummies well.
Thank you, bro :) ALWAYS!!!
Thank you for the wonderful video and editing style. I'm planning on putting these flipsky 63100 190 kv on my Lacroix Board. I'm also installing the Boardnamics BN M1 AT Gear Drive which you state in your video to not install flipsky 63100 motors on Gear Drives, If I'm understanding correctly? You also said "Impossible to install gear drive mounts because the length is not right"? Is this still the case in 2024 flipsky motors? Boardnamics told me it will work. Maybe BN found a way to adjust to make it work ok? Thank your any help greatly appreciated!
Nice video👍🏻 run-run-run kami🐶
KAMi was too much run lol :)
That's sounds like F1 car. Can't get enough
Thank you for watching :)
What are your thoughts 2 yrs later in 2024? 500 mile review of the 63100 190kv flipsky motors!?! Also what is your battery size? I wonder how much more torque and top end speed did you get? Some say the longer motors can cause negative issues. Did you discover anything negative? Thank you!!!
That’s such a cute dog.😁 that board is awesome bro. I’ve just ordered the ubox 75v 200amp esc/vesc as one of mine popped . So can’t wait to get riding again. ✌🏼😁
Thank you for watching :)
보드한번 기똥차게 잘 만드시네요
그런가요 :) 시청감사합니다~
Great video as always ! Thanks for sharing
Thank you for coming and watching too :)
잘 봤습니다~~~👍🏻👍🏻👍🏻
이제 영상으로 대리만족 해야 겠네요 😭
네 :) 시청감사합니다 ~ 언젠가 도전해 보시길 바래요
Amazing. I have 6474 but would love to have these! What battery type and amp output did you use? These motors are capable of insane power!
The battery used the Lipo battery as a 12S voltage. The ESC is currently most similar to the one in the link below. I remember the ESC output current was a total of 160A. Thank you for watching.
flipsky.net/collections/v6-series/products/flipsky-dual-mini-fsesc6-7-pro-140a-base-on-vesc6-6-with-aluminum-anodized-heat-sink
멋진영상 잘보고 갑니다 보드가 다이쁘고 성능도 짱인듯 파셔도 대박날듯요
아 그런가요 :) 시청감사합니다~
언제나 멋진 영상 감사합니다.
네~ 시청감사합니다 :)
Could I put these directly onto my propel endeavor 2 pro?
0:23 Daaaaaaaang Dog, those are beefy!
Thank you for watching :)
Those are huge motors. I'm riding 6384s which are plenty strong for me. The 63100s must be insane.
Yes it was and there was a more delicate rotational Texture than the 6384.
Thank you for watching :)
Are the flipsky trucks alright? I'm looking to DIY my lycaon swift where the only original part is the deck battery, and the enclosures. Was looking into even the flipsky kits (Flipsky Group DIY Electric Skateboard Double Main Shaft Trucks and Motor Kits Dual Drive - 6374 10MM 140KV) where it has the motors, trucks, and cloudwheels already with it and then get a tenka VESC to program it.
I think that even if your battery is Sanyo's 3P battery configuration, the overall discharge rate seems insufficient to be used for the ESC and motor you chose. The most important thing when planning for a DIY or finished product board is the configuration of the battery and the maximum discharge rate of its battery pack. This is because ESC and motor can be determined accordingly. In conclusion, the battery you have cannot fully utilize the performance of the motors and ESC you chose.
OoiiiI!!! Theres still space, those motors should be touching in the middle lol!! Need bigger motors!
Thank you for watching :)
Which board will end up with the motors? Nice vid as always bro. It was good to see my fav F1 board out riding again :)
HaHa :) Thank you for coming bro~ I think many people were waiting for the white one riding.
Wow man !! 👍 Where to you get most.of your parts from, gears, wheels etc. I have seen your earlier videos, you have done well and progressed well. Well done !!👍👍
Thank you so much for a long time :) should check
trampaboards.com/
flipsky.net/
massivestator.com/
diyelectricskateboard.com/
Ouaw ! Crazy board !
Thanks :)
The street setup sounds even more like a Formula 1 racer now
The sound of the motor is always exciting :)
All the support
hello, really please to see you on a board. and how about the range did this hudge motor affect it a lot or not. have a good trip. :D
I didn't exactly check up on that. But the experience on mountain off-road is that I guess it consumes 10-15% more power than the previous motor 6380/170 4100W. Thanks for always :)
What type of Eboard are both of those Eboards? I would like to build both of them as they look super-cool! Great job!
Thank you for watching :) and should check here~
trampaboards.com/
Are those dual tire rims (8 tires)available for sale somewhere?! Those would be perfect for sand riding
It's not for sale because I made it myself.
Parabéns, ótimo vídeo, o skate é muito lindo :)
Obrigado por assistir :)
Is it possible to buy the 63100 140 kv and making it accelerate less faster to have a torque like the 190 kvsacrificing the top speed ?
You can reduce the gear ratio. For example, you can reduce the number of teeth in the wheel pulley and increase the number of teeth in the motor pulley.
can this motor be used with different ESC from flipsky VESC??
100% sure~ :)
Great fun video as always Brotha. Compared to 6368 motors using the same Battery, do you feel an increase in power?
Thank you for coming bro :)
Yeah, It's powerful than 6384, also when I connected it to the same ESC (12s), I felt the texture of the rotation was more delicate and smooth.
It was hard to express, but it felt more luxurious.
크~~~ 멋지네요 당장가서 들고 오고싶네요 ㅎ
크~~~ 안돼요 ㅎㅎ
준희님 날더운데 건강관리 잘하셔요 :)
what would yo usay the difference is between a 6374 190kv motor compared to the 63100 190kv motor? is their much of a power difference?
Yeah, It's powerful than 6374, also when I connected it to the same ESC with battery(12s8p), I felt the texture of the rotation was more delicate and smooth.
It is not easy to explain, but it felt more luxurious texture of the rotation.
와 첫번째 보드 송신기 진짜 이뿌네요
Trampa board 의 WAND라는 리모트입니다.
@@KAMiJUINs 오오오 감사합니다 !!
why double wheels?
You can always stagger them one forward and one aft
Nice man
Thank you for watching man~ :)
Great video
Thank you brother :)
whats the top speed you ever achieved on e-board? because whats the point of having those sassy motors if you never use what it has to offer... but well... thanks for a review :)
Thank you for watching :)
hey, im planning to build esk8, since u inspired me. I wanted to ask, what vesc would u recommend for 63100 dual motor?
VESC-HD60, Focbox-TENKA, Flipsky-FSESC6.6, and Spintendpower-Ubox are all good (with 12s battery set up)
@@KAMiJUINs thanks
Those things are huge, you'd need a like a 12s10p 18650 battery pack to supply their max performance.
-Motor maximum current is 100A
-30Q 18650 1p discharge rate is 15A
-Two motors 200 A
-So 200A divided by 15A
-I think we need more than 13p
But it's powerful enough for me to ride even if it's not the maximum performance :) Thanks~
@@KAMiJUINs Ooph, That's a hungry beast for sure.
hi bro. what kind of remote can you recommend to me ?
I haven't used it yet, but many people are evaluating Hoya's puck as good.
I've never seen that remote what is it
trampaboards.com/trampa-wand-remote-control--vesc-based-remote-gives-all-the-control-you-could-ever-wish-for-p-26992.html
check this out~
Hey mate. Can I ask what battery you use to power these motors?
Two of hobbyking.com/en_us/turnigy-high-capacity-battery-6600mah-6s-12c-drone-lipo-pack-xt90.html?queryID=04b11573d5d0c721e5ad64a1228d5fa6&objectID=78433&indexName=hbk_live_products_analytics&___store=en_us
It's 12s(44.4v) in series.
Where did you get the deck
trampaboards.com
Check this out~
많은 정보영상을 다루고 계셔서 이래저래 초보자 치곤 지식들을 주워가듯 담아 가고있습니다.
해외직구 방법에 대해서 영상에 다뤄주실 계획은 혹시 있으실까요?
그리고 만드신보드 구매를 문의 드려도 될까요?
매장을 운영하고 계신다면 방문 해보고싶기도 합니다
글세요. 만약 한국독자만을 위한 채널을 만든다면 올릴 생각이 있어요.(아직까지는 생각만하고있어요)
그리고 제가 가지고 있는 보드중에서는 팔수있는보드도 있긴한데 주문을 하셔서 새롭게 만드는 것은 불가합니다.
취미로만 즐기고있기 때문에 매장을 운영하지는 않습니다. 감사합니다.
다른 영상 살펴봤는데 국내 구독자 비율이 낮긴하더라구요 😭 ㅠ
영상을볼때 해외 잘나가는 유튜버 느낌이 들어서 ㅎㅎ
영어를 잘못하기도 하다만 모터 업그레이드나
휠에 장착된 모터를 빼서 벨트 타입으로 변경할때에 도움될만한 영상이나 그 부품을 구매하기위한 사이트를 추천 받을수있을까요?
역시 영어 잘 못하면 치명적이겠죠? ..ㅋ
This motor is very strong. I downgraded to 6355 motors to save stress on my batteries 😂
HAHA :) Yeah, if you gain something, you lose something.
Thank you for watching
Awesome & Thanks :)
Thanks sir :)
@@KAMiJUINs Can we drop the Sir ? pls.
HAHA sure Let's start :)
@@KAMiJUINs Have a great week ahead :)
KAMI!!!!!!!
🤯🤯🤯🤯🤯🤯🤯🤯
Great build as always. You're damn freaking talented
Thank you for saying that and watching :)
@@KAMiJUINs you're welcome bro.
Honestly wished u weren't in a whole other country. You inspire me, truly
혹시 입문자들은 위한 전동보드 DIY A2Z영상 만들 생각 있으신가요? 적응하기 쉽도록 높지 않은 출력과 좋은 가성비를 가진... 그리고 esc 설정도요!!
기회가 된다면 고민해보겠습니다~
@@KAMiJUINs 고민마시고 도전을... 열심히 보면서 공부중인데.. 따라하기가 쉽지 않네요...ㅎㅎ
Can I used it for RC Plane?
I think it's possible. But I recommend the 16S battery configuration.
@@KAMiJUINs it is capable until 16S battery? Is it gonna overheat or not if I'am using 16S configuration?
Of course, ESC should also use a product that supports a voltage of 16s. The maximum support voltage for the motor is 16s.
Km/s ?? Max
hi, i am reading on some forums that flipsky products are highly expiring. is all this true ?. I would like to build my first board and was referring to them for not spending a fortune. what do you suggest me?
Well, I'm still using them well. I don't think there's an answer to choosing parts and there's a bit of luck in picking. I think it's the best way to buy what you like~
@@KAMiJUINs I wanted to build my board with dual 6384 190k motors, dual esc 6.6plus, 12s6p molicel p42a. What do you think of these materials?
THAT WILL BE A MONSTER!
@@KAMiJUINs with this build what maximum speed and copper would I be able to get?
It'll change depending on the gear ratio and wheel size
Dayyum!
Thank you for watching :)
What is the voltage
Both were 12s
Thank you for watching
혹시 컨트롤러 정보좀 알 수 있을까요...?
WAND - trampaboards.com/wand-remote-control-with-pistol-grip-p-29886.html
VX2 Pro - flipsky.net/collections/remote/products/screen-remote-vx2-for-electric-skateboard-ebike-eboat-compatible-with-vesc
ESC 호환여부 알아보고 구매하세요
@@KAMiJUINs 허억 너무 감사합니다!!
Nice ride, please provide your kWh/Km used for this ride.
According to our law, the legal speed of personal mobility is set at 25km/h. So I did that in the old video, but I can't do it now. Sorry for that.
@@KAMiJUINs It was not about speed, I was asking about power consumption by the motors. How much it drained your battery.
What’s the maximum capacity?
Gray one (12s 28Ah) White one (12s 6.6Ah)
@@KAMiJUINs in kilo’s I mean😅 how much can the board carry
모터를 저렇게 금속으로 둘러 싸면 렌츠 법칙때문에 모터 망가 질텐데 뭐지?
Wow good parts
Thank you for coming friend :)
✌️
Thanks bro~
Si alguien necesita comprar una patineta en cuanto usted los dejan
Gracias por verla :)
Si tiene interes en una salen al rededor de $1000 Dolores la k el ase no las bende, son echos a su gusto. Checkea mi canal yo bendo las cual yo reviews.
your videos look very nice and a little lonely
Thank you for watching :) and I'm always with KAMi ~
I am begging you, tell us mortals how to remove the motor pulley with such ease
It's only easy to see in the video lol :)
Thanks~
Could u build.me one I will pay
Thank you for saying that and watching :)
Doers and creators have a great respect for people who narrorate their videos and put forth the effort to explain their technique and process for what they are doing in their project. This new standard of silent music filled video is really really annoying, and it shows that to You are lazy an d apparently have no capacity to speak. Gee wiz at least give us subtitles....