Hikvision 2nd Generation Intercom Villa Solution
Вставка
- Опубліковано 20 кві 2020
- In this video we look at the Hikvision's NEW 2nd Generation Intercom Villa Solution
**MERCH** We have collabed with OnTheJob to bring you:
www.onthejob-workgear.co.uk/p...
Follow DVS everywhere:
Instagram: / dvsltd
Facebook: / dvslimited
Linkedin: / dvsltd
Twitter: / dvsltd
#DAITECH #Hikvision #REALINSTALLERS
Your Videos are👍 very informative....Thanks and keep doing such video to grow our knowledge
Thank you , we really appreciate the feedback 😊
Hi. Thanks for a great video. Please assist with how to activate 2nd door relay in the settings? Which exact settings need to be changed?
Thanks in advance!
@DVSLTD awesome vid Dave, what would be good to use for a multi-apartment complex
Great Videos that are very helpful. Thank you
Do you know if it’s possible to configure two buttons on a four button door station to call the same indoor station?
I have a kv6113 station to make use of the calling feature to him connect, do I have to have ivms or an indoor station. My site only uses direct IP.
You mentioned the secure module via RS-485 to overcome the problem of simply ripping the unit off the wall and bridging the lock outputs. But the module only allows for a single secure output. How do you regain use of the two outputs securely in the same way (for both a pedestrian gate and vehicle gate say)? It appears this is a limitation.
hi a walkthrough on the access control side and setting up two electric strikes on the gen2 intercoms as there is little info on these setups
Do you know if th KIS702 needs to be wired with a network cable to the router or can it be with wireless?
thank you
Are you able to show how the door sensor works (e.g. when a door station is connected to a door contact sensor). Is the door status is shown in the indoor station, for both V and/or D series devices?
Thanks for the video. Is there any way to attach each one of 4 buttons of DS-KV8413-WME1(C) to four different people in Hik-connect app? I don't want to use a monitor at all.
How did you get rid of the black ring around the video stream? bought a brand new device from a authorized reseller (manufactured in 05/2021) and the video stream has a these black "hole" look like a ring doorcam. also your image looks really really good. did they change the camera to a cheaper crappier model? seems that the (A) device has some camera correction in firmware and the (B) device not oO
there seems even more bugs... the (B) version has only Door1 in menu... Door2 is complete missing
sorry for not ordering on your store, but after england skipped the eu, the import taxes are quite high.
Can the relay outputs on the indoor station be connected to a lock? I'm wanting to connect the door lock to a LAN-based secure module (as opposed to the RS485 DS-K2M060) so am thinking that's one way to do it.
Found the issue. My monitor versions is TE1 instead WTE1 what you shows in the video.
Thanks. Perfect video and those devices very good. The only problem with outdoor stations, is that the hik-connect app is not working without an internet connection and an indoor station and also that there is no Platform Access in network settings although the user manual mentions this.
Hi , thanks , HIK-Connect does Require and internet connection your Quite correct
I have problem with issuing card. It not reading card to person credential. Do you have same video with this procedure ?
if the internet is unavailable it working on mobile app or no and how add it locally
Hi! Always great vids! Cheers to that! One question: can the outdoor station and indoor station be on remote networks? Connect through the internet? Thanks!
Hi and thanks, we have done it before but its very messy to do that , they are designed to be on the same network , so wouldn’t openly recommend it as you would need to have fixed IP address at each end on the routers and do port forward etc , and depends on the setup may not even work,
can outdoor station directly press button make a call to phone app without indoor station?
Thank you for your videos, you transmit a lot of information that is very useful and difficult to find. I have a question with this generation of video intercoms, can an additional card reader be connected to activate the second relay? For example the DS-K1107M with DS-KV8113-WME
Hello fellow curious human,
Did you find your answer? Is it possible?
Can it connect via WiFi to my hikvision NVR?
Edit: Sorry I saw it does @ 7:00
Can this work with just wired or wireless local network without internet?
What is the difference between villa and modular? Thanks
Hi Dave. Another great video ! One question. On 17:15 you are enable 2 x relays. Is there any trick to enable them ? On my IVMS (3.2.0.10) is a blank screen. Firmware on monitor is the same. Only difference I'm using DS-KD8003-IME1. Are you using IVMS AC version ?
Hi Slav, 3.2 supports this , as well as the 8003 unit you , have you updated the firmware to the latest?
Do u deliver to ireland
Hi, thank you very much for all your great videos!
I recently installed the exact setup through hard wired connection, all works well on the mobile client with an android phone but not with an ios device as the call function will not send the push notification through, with the ios device you will only get the notification if when the intercom call is made you have the actual hikconnect open on the ios device otherwise you do not get a notification! Have you encountered this issue before or have any ideas ? Thank you!
couple of things, please make sure the App and firmware on the devices are updated of course, and on the IOS make sure notifications are allowed for the app under notifications , and make sure do not disturb is not set to on
Great video. Very Helpfull. I have a question. Can we change the message that we hear from the outdoor unit? Now it says'' The door is open''
currently not but something we will look at
Thanks a lot for your video, it's been really helpful for me but I have a question... Can you change or avoid the recorded answers? Is it possible to avoid: "the door is open"? Or record a different "leave your message"? Thanks!
not currently but I know this is being looked at so I don’t think will be to long away
Hi, your video is great. There isn't too much (updated) information on the net about how to configure HIKVision intercoms. One quick question, Is it required an indoor station to make the HIKConnect app to work with DS-KV3118-WME1?
I could connect HIKConnect app to DS-KV3118-WME1 using the IP address but there is no "unlock" button in the app and it doesn't get any notification from the intercom. Is my device broken or an indoor station is mandatory? Thanks
Hi , and thanks, and yes the indoor station is what talks to HIK-Connect , 😊
@@DVSLTD Does a Hikvision wifi NVR make a notification sound when the door button is pressed? Or do I need the monitor for that also?
Cheers.
Hi thank you for taking your time and making these videos these really appreciated helping so many people, I was wondering if you can help me, can I just connect the Hikvision DS-KV8113-WME1 direct to the Hikvision DS-7616NXI-I2/16P/S OVER POE , STAND ALONE without using the indoor station, and if yes will that work like camera recording all the time or only when the bottom is pressed thank you
you can power it that way but it will need to be programmed , once it is you can add it as a camera but it will record 24/7 not just on the button press , 😊
Hi, is there any way to display in hik-connect if a door is open or close with the outside unit (kv8113)? I see that you can connect up to 2 "door status" on this unit. Thanks!
if you connect the door contact , after the door left open time it will then repot this as an alarm
Thanks for your reply, i see that the event is fired if the door is left open but i don't see an event that will notice you once the door is closed again, în this way if someone closed the door the last event will remain that the door is open.
How much distance support in the outdoor unit and is it come with waterproof or not?????? Thanks Mate.. I love all ur videos...
Thank you , yes there weather proof IP rated , can you confirm what distance you are looking at? 😊
Hi. I am getting desperate to connect a lock to the DS KIS604 S KIT (DS-KV8213-WME1 intercom) . The door equipment has POE connected, what are the connections to use for the lock? Do I need an external DC or the POE should be enough for the lock through the panel? Thanks a lot
in the manual it will show you how to connect the lock and yes please use the separate DC PSU 😊
Good day
I saw some of your tutorial. Maybe You can guide me a bit.
Local Hikvision team in Veracruz, Mex. aren’t able to correctly set up Intercom to see video from door bell and also cameras.
On beginning all been set up via Network Video Recorder Model: DS-7608NI-Q1/8P
And run well..... but I saw option that also I can see another cameras on IP Video Intercom Kit
Model: DS-KIS604-P(C).
Then technician told me need to add switch and all cameras have to go thought another switch and then to NVR.
He set up all, I can see other cameras on intercom but…. Now any call via intercom not generate video call only audio and other side not hear me, call not appear on mobile phone.
I think it is total mess up now. Probably additional switch port was not need at all, just need proper configuration.
Evry where I saw only tutorials for set up intercom with home display or into NVR.
But no where any tutorial about adding intercom to NVR and get also desired ip camera viev on LCD intercom display as is useful way to quickly check surrounding situation.
Does the 1st Gen 2 wire intercom need a separate PSU aswell? or is that supplied from the Hikvision power supply unit
Hi , the 1st Gen 2 wire kit comes with the 2 wire PSU unit, same as the modular 2 wire they both Require the 2 wire interface unit and PSU , we sell them as kits or separate components 😊
DVSLTD sorry I meant for the door mag locks.. I should have specified
You talk about taking a snap shot of a person as they press the button however how do I get that to work? I am using the DS-KV6113-WPE1 as a stand alone unit and I have placed a memory card into the doorbell and it is also directed to my NVR for continuous recording. Can i get it to work with what I have or do I need an FTP server or do I need an indoor station? Currently all I get is a notification that just displays a bell icon with no actually image.
So it looks like I have to have a FTP server to get the images working I have managed to get my FTP up and running however, the issue now the doorbell won't save images to the server either by pressing the button on the bell or via motion detection. I have tested the FTP does in fact work on another camera so the weak link is the doorbell.
on the HIK-Connect app om latest firmware it should give you that image, especially if you have the SD card fitted inside the indoor station ,
@@DVSLTD yes that’s what I thought it should do but it doesn’t. I am also using it as a stand alone doorbell as I don’t have the indoor station. I do have it hooked into a NVR but that doesn’t really alter what the doorbell does as I am only using it to record footage.
Hi, does the 2nd gen villadoor support a keypad please?
Hi the Villa doesn’t currently support the keypad option, sorry
Hi could u tell me in line crossing there is a 1 min delay to my email that i dont see a picture in email of the person who crossed the line
Hi david, there was an issue previously based around firmware, have you updated the camera / NVR firmware ?
@@DVSLTD i only bought this nvr last week 7608Nl-k2/8p how do i update it. Only new to this
Hi there. How would we go about connecting an auto gate to the door station?
on the rear of the unit there is a relay , you can select if you need NO or NC connection and connect into this, you should have the trigger input on the gate for external connection
Thank you very much. This is very helpful! Will try it out.
I am waiting on a reply back from your tech guys but no rush. I brought the modular version of this which is working great. But the Hikconnect is having issues when someone presses the call button. Seems there is some issue with Hikconnect and Android 10 phones. Have they found a work around for this at all? I can view and have audio. But its just not calling the phone.
Hi and thanks for the comment , not seen it myself but we don’t run android here to be honest, assume the HIK-Connect and the intercoms are on the latest updates ?,
@@DVSLTD thanks for the reply. Yes all software for phone, intercoms and monitor stations all up to date. It has been a long ongoing issue prior to upgrading customers systems. We had hoped that more info would come from Hikvision but they have sadly done nothing about it. Iphones are working with no issue. But of course we have a mixed group of customers and quite a few have been moving over to android.
I'm trying to connect an additional reader (DS-K1107M) To intercom (DS-KV8113-WME1) now that’s where the problem arises!
I connected them via RS-485 communication, the reader shows no signs of life its correctness has been checked and it is correct.
Should something special be turned on and adjusted somewhere in the intercom, the connection is according to the scheme from the instructions, The DIP switch is set as instructed
Hello Internet stranger,
Did this work out eventually? I can't seem to find any conclusive literature on this and I'm planning to implement the same kind of configuration as yours soon. Any help or insight would be appreciated it.
Thanks!
Can I install the DS1107M reader to your video intercom?
Any update on the possibilities of this?
Did this work out?
Let me get this straight. Is it impossible to record event video to an SD card for reviewing later? It seems mad/useless that a security camera - which this is - doesn't automatically record motion event video which can be accessed through iVMS-4200 or Hik-Connect. Please tell me I'm wrong.
Hi kay , no the event snapshot will be saved into the indoor screen and also the HIK-Connect app will show the event notification if you use the app , you can also add the outer call station as video channel to NJVR /DVR as IP device and use motion also 😊
@@DVSLTD Thanks DaiTech. I'm asking about video rather than snapshot JPEGs. All my Hikvision IP cameras allow me to access motion event video recordings on their internal SD card directly from iVMS-4200 or Hik-Connect without using a NJVR /DVR. Logically, I would expect the video intercom camera to do the same thing but you seem to be confirming that it can't. I'm at a loss to understand why Hikvision haven't enabled it since it's a feature that most customers would expect to be there. I would never buy this product without this functionality.
@@kayberry6292 if you read the text on the box you will see that it’s an intercomm - not security camera
@@jacekk6913 It's called a VIDEO intercom - and it's perfectly capable of recording video: Hikvision have just crippled it. The software even includes a completely useless MOTION DETECTION setting for the "video camera". No video recordings from that either. It's so pathetic it makes me really angry - especially as the indoor stations can accept high capacity SD cards. All Hikvision had to do was state clearly in any of their video intercom literature that the camera doesn't record video and I wouldn't have wasted my money on it. Now they kick me when I'm down two grand by releasing the updated series 9 video intercom which somehow manages to record a whole 7 seconds of video when the alarm is triggered. How about fixing my useless 1-year old series 8 'Pro' model Hikvision - or don't you want to keep your customers?
@@kayberry6292 Stil - Intercom is not a camera. Indoor station has a SD card slot but it does nothing. You wanna to fix something that is not there on purpose. Write an email to HK support.
What card reader equipment is compatible with this video intercom?
the cards are Mifare 1K prox
@@DVSLTD Yes, I understand that they are Mifare .. The problem is that I have to install another card reader module and apparently it is not compatible with the card reader models that hikvision has .. Which would be the appropriate one according to your experience. Thank you
@@Daniel-cx4it sorry I get you , it doesn’t support another reader module at this time,
why nobody tells you that with this intercom you need an extra 12V PSU and an extra cable for the electric door lock / magnetic lock.... which i think it is a very NOT smart (crappy) thing....... why couldn't hikvision make an 12V output on the door intercom, because right now i really not understand for what did they make it PoE because you're forced to use an PSU and to draw an extra cable.......
I get it , they are looking at this as an improvement but a lock should be powered by a battery backed up supply and it wouldn’t be fail safe as you could destroy the unit and open the lock , and each lock is different power requirement
@@DVSLTD There are also some Hikvision locks if i'm not mistaken but think about this, i have a switch backed-up from an UPS, so i draw the Lan cable from it and should have backup for the switch backup for the intercom and door lock if the door lock is powered by the intercom door unit, i hope i explain right and make my self understood....
Hi Dave,
It's a shame there is no possibility to send an e-mail when a call is made. This would be a positive add on for these Villa intercoms.
Hope this will be added in a next firmware update.
Thanks,
Antoine
Hi
Today i will fix 2gn system
Daitech 👍🏼 what is the function for the sd card slot on the outdoor station, I don’t know where initialize it
currently you cant format it , when I checked its reserved for future use