A very useful idea for every man! To the garage or workshop.
Вставка
- Опубліковано 6 вер 2024
- Friends, my name is Eugene! I am the author of the channel. Do-it-yourself Ideas.
On this channel, I present everything I've done with my hands.
Creative ideas, useful tips!
We turn simple things into unique ones! Subscribe, it will be interesting! Spanish Channel: vk.cc/ajPbE3
Friends, my name is Eugene! I am the author of the channel. Do-it-yourself Ideas.
On this channel, I present everything I've done with my hands.
Creative ideas, useful tips!
We turn simple things into unique ones! Subscribe, it will be interesting!
A very useful idea for every man! To the garage or workshop.
Love this guy! Recycling quality materials into crap! absolute genius!
A real nice cyclone separator, I like your workmanship. Would have liked to see how much made it through to the vacuum.
Once again I admired my patience for watching it to the end.
?
Gracias familia gane por todas las ayudas recibidas en esta emergencia,se comportaron como una gran familia,cuidense mucho, mil bendiciones.
I already have a shop vac. what I don't have is the last 10 minutes of my life back!
YOU are a funny dude,,, I about crapped I've got two shop vac....
As a qualified boatbuilder I just had to investigate. Since there was no explanation of the project's function I scrolled through the video to the end. So glad I did.
Thanks for all the comments, I became suspicious when there was no title so I read comments and have not watched. I appreciate your help in saving myself a time waster
Chapistas muy bueno él Videos saludo
I should have read the comments before waisting my time watching this!!!
good thing i read yours before kept watching!
My technique to watching all of these types of vids: Go to the last 20 seconds to see if its of real interest and/or value to you. If it is, go to the beginning, if not, minimal time lost, pain inflicted, then on to the next one.
fuck yeah thats the only way to know if its worth it to watch it or skip to the next video...✌
I fell for the trap, I thought he was building something interesting? Please say what you are building in the title, it will save you the thumbs down and ignore button.
Dammit I wasted my time also 😞
para quem tem este monte de ferramentas ta bom !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! prefiro comprar um tbm
Damn, spent all f-ing day making a shop-vac...I would have just went and bought one and spent the rest of that time drinking beer
Amen to that
Con esas maquinas hasta.yo me animo
Oh my gosh! Thank you for sharing your brilliant and "very useful idea for every man".
How on earth did you come up with such a Genius Idea? Your craftsmanship and shop skills... where did you learn to use a pencil for marking lines like that? Not to mention the dexterity you displayed using that phillips screwdriver. And wow, applying the glues and sealers...I am so impressed when I see someone stay inside the lines!
I have to say, I was nothing short of awestruck, as I watched you with the random orbit sandpaper disc in your hand. It never dawned on me to use a sandpaper disc without the electric sander. Not having to hear the annoying sound of an electric sander is one thing, but the savings on electrical usage is another.
But whoa, just think about the future...when on your next sanding project, you can duct tape the vacuum hose to your wrist, and voilà, dust free sanding! I can hardly wait for the next Genius and "very useful idea for every man".
It made me nervous watching you without a push stick while using your table saw. But then, after seeing you with all 10 digits intact, realized that I have no right to criticize or complain.
Speaking of complaining, I can not believe how many people complained about wasting their time, especially when they had no idea what you were doing, or whether or not you were wasting your time. I just don't get it. Some people are just so darned selfish, and they only think about their own self.
I am not sure what I liked most, your video, or the comments. Generally speaking, I am not much of a joiner, however, I think I will subscribe to your channel to see what kind of "ideas para el cabello" you come up with.
Thank you again for sharing, and keep them coming! Hasta Luego, Vaya Con Dios
You got 5 million people to view your channel in 3 months. Everyone is complaining lol. The title is what got everyone to view. Great job!
Had me going. I thought this was going to be a potato gun! LOL
I've done something like this from a bucket to vacuum the ash from stove. It really helps! 👍
For videos like this that don’t reveal what is being built, just skip to the last minute or so to see if it’s worth your time.
Luv the creativity. Like watching and learning different techniques n ideas.
Learn to use that saw. Never leave the piece between the fence and the blade loose. Never cut such a narrow piece between the fence and blade, use a sledgehammer or at least the miter guage.
Absolutely LOVE IT. Turned some old vacuum cleaner into an excellent cyclone dust collector with a massively larger capacity -- which can be attached to any tool in the shop. Disregard all the nitwits. Just keep making! You're awesome!!
They invented this thing called a shop vac, 39.99 at Walmart. Save your self 28 hrs of work lol
Hast gut gemacht!👍👍👍
Thought you were making a URINAL for a shop or garage😎
It's not so much about invention as the class ability to imagine this..good job sir.
Congrats, you just reinvented a dust separator!
Buen invento saludos de chile
Dude, $79 shop vac at Home Depot and your issue is resolved. Instead of spending days working on this when you could be drinking cold beer.
Greg Stymest - which just gives money to the Chinese for their “Tat” while people sit back drinking a beer getting fat and staying lazy.. this guy had achieved much more by creating, learning and achieving something. Move to the US, they are all like you there. You would fit right in and be happier.
Muy buena idea
I just wasted almost 9 minutes that I will never ever ever get back
10 minutes - Had to see what the comments thought about the reinvention of the wheel....
What a crap idea. Wasting our time to watch it.
You took the words right out of my mouth. They sell shopvacs where I live.
@@jbacker1190 huntingblinds
Bem dia! Sua ideia muito boa gente como você ajunda muito
Não temos as máquinas que ele tem, mais fácil comprar um aspirador.
Kkkkkk bem ISSO.
Porra cara maluco deve ser a quarentena que ta fazendo ele fazer isso
Comprar uma da menos trabalho KKK
Exatamente isso perdi todo o meu tempo até o final para sequer tem uma máquina para fazer isso.
Nine minutes I'll never get back. Thanks....
Hey, he made a Shopvac!
Holy "shite"....this guy just invented the shop vac!! Gawd-Al-Mighty...mamma...mia!!
At first I thought, " a garage urinal, great !"
I thought it was some kind of toilet to
For pretend AstroNOTS...
Oh wait, NASA already invented this for their fake AssTroNOTS!!!
thats a funnle with a short hose outta wall :)
ithougth Dome Kind of Automatic pressure von with Gas and air
Gatorade bottle for urinal, don't go camping without one lol
Es fascinante este video 🤑😀😃😄🤑
OK...now I'm going to go watch something exciting...like a video on life insurance
very very good 😊🙏🙏🙏
Major safety violations! Never push a short piece through a table saw and never expose more blade than needed. This guy is lucky to have any fingers left.
He will learn the hard way
@john Adams thanks Karen
R4
I built a cyclone dust separator from a 5 gallon bucket and some PVC. took about an hour. wish i had put it on you tube 4 years ago. now everybody makes their version
Do the video and free the world from what looks like alot of hard work lol
I can’t believe any watched this entire video. I went straight to the end, saw a really bad version of a Shop Vac....but then lost 9 minutes of my life reading comments.
It’s not a shop vac version it’s separator for dust to keep it out of your shop vac
Joe Jones isn’t the point of a shop vac to pick up dust? I use mine to clean ash out of a smoker, I knock out the filter about every other use....hasn’t failed in 10 years.
Good Video, Thanks for sharing.
Very dangerous move doing a crosscut on the table saw like that.
You have beautiful equipment
Why didn't I read the comments first before wasting my time thinking this would be cool!
QUE BUENO QUE LE DI RAPIDO AL VIDEO...ME SOSPECHABA QUE IBA A SER UN DESPERDICIO..ESAS COSAS YA LAS VENDEN HECHAS Y BIEN ECONOMICAS...
Wouldn’t it be easier to buy a shopvac than to make a shopvac?
Good job
At 1:58 into this video, you are showing crosscutting a 3" wide piece of plywood using the fence as the only guide. This is one of the most dangerous practices you can do on the table saw. Why? The width of the workpiece that is registered against the fence is too narrow for good control. If it should twist at all, with your hand holding it between the fence and the blade, your fingers will be drawn across the spinning blade resulting in their amputation. DO NOT DO THIS! For crosscutting short lengths on narrow pieces, use the mitergauge with an extended wood fence bolted to the face.
The fence will be cut up into it the first time you use it, but it should be tall enough 3" or 4", to still maintain support. The portion to the right side of the blade will carry your cut off past the blade as you feed it and your fingers will be no where near the blade. Make one of these ASAP! You are flirting with DANGER! See the post just below this one .......
@D Maxson I'm a complete noob using shop power tools and even *I* cringed at what he was doing at 2:00.
Thanks Patrick, video made me cringe
Should've showed the vac filter too.
Golly gee Mr. Science I could have gone my entire life not knowing how to build a Dust Buster LOL
Thank you
You need to state what your going to build in the first few seconds,
But then you wouldn't watch it! :-)
@@lotuselansteve........ I didn't watch it anyway, skipped to the end to see what it was so I don't waste anymore time than I had to. I agree with Craig, show what it is then show how to make it.
Esta muy interesante. Yo personalmente, sole le agregaría una vase con ruedas donde encajara bien en tanques y una manilla para transportarlo donde quisiera, más fácil. Te felicito por las ideas que tienes. Un saludo
They already make those they are called a shop vac.
One good ideas with the plastic barrel transformer in the material cleaning. Video cool. Tank you very much.
I can build the same thing with a home depot bucket and 2pvc fittings.
Or buy the dust buster or whatever they call it that goes on top of the Home Depot bucket. It only costs $20 and he had to spend $40 in all the shit he cut up
Show me your video buddy
Sangat kreatif mantab bos.q...👍
I thought he was building a cannon then the last minute made me laugh.!..hahah
Bravissimo, bel video ed idea geniale, proprio ciò che mi serve da usare in abbinamento ad una piccola sega circolare ! Grazie
Thanks for the comments. Now I won't have to watch this. I was only 16 sec. In when I thought I'd better check the comments.
.
I liked it ! Halfway through I realised that I don't have half the tools, but was curious to see it through anyway. Thank you Eugene for, firstly, assuming that most of us have half a brain and you didn't waste time stating the obvious. Secondly, and I really liked this, no stupid bloody music !!!!
Up next, a reinvention of the wheel.
I regret clicking this video. Title means a lot to sometimes.
PRA FASER ISTO PRECISO COMPRAR TODO ESTE MAQUINARIO, COMO HOBBY ACHO VALIDO,MAS SAI MAIS BARATO COMPRAR UM ASPIRADOR QUE ASPIRA SÓLIDO E AGUA, NÃO LEVEM A MAL É SÓ MINHA OPINIÃO
Pretty crafty shop vac
He better get a patent on that before somebody steals his idea. Like Shop-Vac
You can already buy one of these for $20 at Home Depot
@@joejones2847 see... that fast depot saw his idea and made some
@@joejones2847 that's what I was thinking
Did this guy just build a vacuum that he plugged a vacuum into to make it work? I’m not a highly intelligent man but i can see where you could save a lot of precious time on that project!
I'm surprised he still has all his fingers.
Never cross cut with just the rip fence and always use a miter gauge or a cross cut sled, unless your into pain or meeting EMT’s.
Someone take away his table saw before he loses several fingers. Please learn how to cross cut safely before showing others.
I missed whatever you saw in the cross cut because I was so aghast over the ripping.
nice solutions
I have 55yr experience as a carpenter, plz, when using the table saw never uses your bare hand.
Makes we want to go build something. 😊
0:17 Ok, I'm impressed already! I couldn't draw a straight line around a cylinder like that to save my life!
Bravo geröekten süper oldu👍
Did he just make a vacuum cleaner for a vacuum cleaner I'm so lost 😂😂
Секрет успеха в правильно подобранной надписи на футболке...
Glad I skipped to the comments first..
Thanks guys 😎👍
That's one very nice band saw!
azcharlie2009 Yes. Also serves as an ear protection storage device. Everyone should have one so you don’t have to wear them!
We use a brush & shovel,we don't need all that fancy gear.
Don't you mean a brush and a dustpan
@@almcallister6490 no in a warehouse use a shovel, especially if cutting a lot of wood a dust pan wont work
@@almcallister6490 ahhh man, you must try a shovel. It's life changing.
I bought a shop vac for 5 bucks at a yard sale. Works juuuuust fine.
You really need to learn how to use a table saw.
Tem muitos aqui criticando o cara, mas isso evita de estragar o aspirador ele dura 10 vezes mais, ou nem estraga mais, e nem precisa ficar trocando ou ate mesmo colocando o filtro, fazendo isso aí, é bem útil mesmo..parabéns pela ideia, vou fazer o meu aqui...mas dá pra fazer mais simples também , com balde, galão, ou tubos de 100mm..
Looks like a lot of time and money on something that every hardware and lumber store has
This is a great idea, Very useful. But as a former shop teacher some of your table saw and band saw techniques make me cringe. Please use a push stick to protect your fingers
Say what you’re making in the title.
Lol that's what I'm looking fir. What is this???
If he did that no one would watch the clip. This way people watch out of plain old curiosity.
George Kuruvilla then it should be something worth the wait.
Felicidades es muy educativo tu vídeo, Hoy aprendí algo nuevo gracias.
É sério q alguém com esse monte de ferramentas iria perder tempo pra fazer um depósito pra aspirador de pó? Ideia fraca não valeu
Perdi meu tempo assistindo..
Felicitaciones,,,super útil!!!!!!
buy a dust deputy cyclone, a 5 gallon pail, and a shop vac and save yourself a ton of frustrating work! Narrate your video and tell what the heck you are building and why.
Always skip to the end.
these kind of videos suck,, I did skip to the end, What a pain in the ass, At least say, Hey got extra time, extra parts make your own dust collector. dam
I like this kind of videos: no irritating English with a heavy accent narration, no stupid music. Great!
@@eknaap8800 I've often wondered why some folks prefer silent vids.
Makes sense, but I would rather have the choice of listening for any helpful info or muting it cause there's not.
@@Pablo453 English spoken with a heavy accent and/or terrible music, is worse than a silent video.
What an idea????
Should be titled, How Not to use a Tablesaw....
That’s awesome
Until the end I thought he was making some kind of bad-ass bong.
Colin Sorrells haha thats better than mine I thought he was building a garbage disposal
Hahaha me too a bazooka Bass hahahahah
Muito fácil de fazer,vou começar hj,por enquanto só tenho a tinta preta.
And just to clarify my prior comment, the way you are cutting on the table Saw is what is stupid.. Don't take your safety for granted..Take it from someone who wishes they had all ten of there finger tips back.. AND that came from being safe and using push blocks.. It can happen in any situation but your more likely to get by with a less serious injury if your doing all you can to perform the cut as safe as possible..
Good job 👍
He needs to watch Norm Abrams and learn some basic shop safety.