I give this young man TEN STARS for this video! 🌟🌟🌟🌟🌟+🌟🌟🌟🌟🌟=10 I have to admit that I was VERY skeptical at first but I watched with an open mind. This is an EXCELLENT solution to a very prevalent problem. Many people struggle with 'walking' band saws, drill presses, grinders etc. This is dangerous!! The weight of the concrete and the rubber works together perfectly to solve this tormenting problem. AND, wait, there's more! It gets rid of a junk tire which is a major global problem!! Art from Ohio
GREAT idea! You have found a solution for me that I had been trying to solve for some time that helps me organize and use my equipment in my small shop. Thank you GREATLY!
That was alright man..! I had no idea where you were going, and I was entertained. I like watching folks work out solutions to problems. I'll give it a 10. Good content...💪
Ну что тут скажешь? Идея отличная. Я сам уже лет 10 собираюсь соорудить подобное основание для уличного фонаря (чтобы его можно было по мере надобности перемещать). 10 из десяти. 😊 Да, и "балеринка" для вырезания отверстий фрезером у тебя прикольная. Возьму "на вооружение". Классный видос, спасибо! 😊❤
Very nice idea !!! I love it !! Heavy yet... portable...versatile...very cost effective...and its a use for a old tire !! What's not to love!! Very good work !! 👍👍
Mines similar to that, I mounted it on a 24" semi wheel. I love the idea of having wheel on it to roll around, will be adding it to mine. Defiantly a 10+
The enjoyment was trying to figure out what it was you were making. I had no idea until the demonstration at the end. It was a very entertaining video.
I recommend heavier duty wheels - those skateboard/luggage wheels will only last for a few roll-arounds before they split. On the bright side, with this design, they will be easy to change as often as you want, and to whatever better alternative you decide on after the first set fails.
@@doughaven-rf8id and how are you going to lift it onto the dolly without breaking your back? The solution in the video seems way better than using a dolly.
Well, here in England, a dolly is commonly a board with a castor on each corner. What I think you're describing is known as a hand truck or sack truck. But whatever you call it, how can needing to use something else possibly be better than having the ability to move it around built in?
@@chillstar Not just in England, Chillstar. But I believe we're on the precipice of the terms being synonyms here in the US as so many people casually use them interchangeably (like sunroof/moonroof). Whenever my neighbor asks to borrow my dolly, I always bring over a dolly, even though I know he means my hand truck; yeah, I'm being pedantic, but he can end that pretty easily :-D
My Dad had one of these 60+ years ago ,minus the mini wheels and concrete. Welded 3" pipe to steel wheel .added vise to top.Just lean over and wheel it around to where you want to be . Still using it minus the tire. It burned away from all the welding slag!
I had 4 35 inch tires had to get rid of. I cut the side walls off and use them for around base of ornamental grass to keep them from spreading and to keep weeds from growing. Bury them under mulch.
That wont work,i have changed many motorcycle tyres and the amount of force req is a lot, myn is mounted to my concrete floor,it doesnt move. prob ok for bycicle tyre changing.
What a great idea…my dad would have loved it, made it and used it a lot! (still miss him RIP) I’m wondering if larger wheels could be used by mounting them more towards the center of the tire?
I just got back whatching the channel UA-cam made it where I could not see your stuff for a while I have made stuff for my shop from what I find on this channel
Excellent idea with great execution. Needed to put flat washers on either side of the plastic wheels. Otherwise the steel next to them will chew them up. 9/10.
Very Nice, If I was build one, my situation would require bigger wheels for taking the stand out into the rough yard. Oh, if only I had some concrete floors,...lol
Soy el único que piensa que esa llanta todavía aguanta sus buenos kilómetros; todavía está buena antes de ser considerada vieja y darle una nueva vida?... 😅
Hi, this tire was on my car. Outwardly, it does not seem to be bad yet, but while driving it hummed a lot and there was vibration on the body) You saw her further fate in this video!
Aquí en Costa Rica las carreteras están tan deterioradas que esos defectos de las llantas ni se notan; se cambian porque ya están muy desgastadas y no van a pasar la inspección vehicular, ahí ya se usan para construir muros de retención o muchas otras aplicaciones similares!... 🤭
Waste of time, just use a tire and rim, and if you need it heavier then add water into the tire. Also, it does not need the tiny skateboard wheels, to be rolled where you want it.
Hi, how do you like the idea and execution? Rate from 1 to 10
11
Solid idea. Maybe a tweek or two it goes from 8.5 to 10.5
10
10
More than 10 👍
10/10 I watched the entire thing, no skipping forward because I had no idea what the heck it could possible be, it's brilliant!
I give this young man TEN STARS for this video! 🌟🌟🌟🌟🌟+🌟🌟🌟🌟🌟=10
I have to admit that I was VERY skeptical at first but I watched with an open mind. This is an EXCELLENT solution to a very prevalent problem. Many people struggle with 'walking' band saws, drill presses, grinders etc. This is dangerous!! The weight of the concrete and the rubber works together perfectly to solve this tormenting problem.
AND, wait, there's more! It gets rid of a junk tire which is a major global problem!!
Art from Ohio
GREAT idea! You have found a solution for me that I had been trying to solve for some time that helps me organize and use my equipment in my small shop. Thank you GREATLY!
Non ci sono commenti da fare, un genio, complimenti sei un grande. 💪
absolutly STUNNING!!!
BRAVO
Used to see this a lot at gas stations and construction sites back home in Hawaii (without the little wheels) and also in the military.
That was alright man..! I had no idea where you were going, and I was entertained. I like watching folks work out solutions to problems. I'll give it a 10. Good content...💪
Ну что тут скажешь?
Идея отличная. Я сам уже лет 10 собираюсь соорудить подобное основание для уличного фонаря (чтобы его можно было по мере надобности перемещать).
10 из десяти. 😊
Да, и "балеринка" для вырезания отверстий фрезером у тебя прикольная. Возьму "на вооружение".
Классный видос, спасибо!
😊❤
10/10 lots of quality work went into this. I can tell by the way you work that your work ethic is superb! ❤
I would certainly agree.
Ive got about 10 old tires i need more ideas for, keep them coming
Very nice idea !!! I love it !! Heavy yet... portable...versatile...very cost effective...and its a use for a old tire !! What's not to love!! Very good work !! 👍👍
nice idea, what a great base, little heavy but nice
You went from an idea to putting that idea into use. It’s the effort that counts and the result was pretty good. Rating: 9
@@JeffreyRust-oq7rw - Naw, not complicated at all if a person can see the steps and the end result in his or her mind’s eye.
@@meangreen7389 Nobody said it was complicated - Dork.
@@artszabo1015 - Your response is laughable Junior. Only a Dufass like you would misinterpret something so simple.
@@artszabo1015- Obviously you didn’t see the previous comment. Go sit in the corner Junior.
@@artszabo1015 - Oh come on, back up your dufass comment.
Mines similar to that, I mounted it on a 24" semi wheel. I love the idea of having wheel on it to roll around, will be adding it to mine. Defiantly a 10+
Great idea...I can definitely see one of these in my shop. Thanks!
Imaginative solution to a problem. Well executed and it looks useful, I'll give it a solid 8/10.
Very good idea and you repurposed old tires which helps to cushion the vibration and also your toes
The enjoyment was trying to figure out what it was you were making.
I had no idea until the demonstration at the end.
It was a very entertaining video.
Absolutely!
I recommend heavier duty wheels - those skateboard/luggage wheels will only last for a few roll-arounds before they split. On the bright side, with this design, they will be easy to change as often as you want, and to whatever better alternative you decide on after the first set fails.
Skip the wheels and use a dolly cart should you need to move it. It would be be more streamlined and seems like a lot of extra time for nothing.
@@doughaven-rf8id and how are you going to lift it onto the dolly without breaking your back?
The solution in the video seems way better than using a dolly.
@@chillstar Like a two wheeler dolly, the ones delivery people use to bring cases of soda into a store. WTF were you thinking ?
Well, here in England, a dolly is commonly a board with a castor on each corner.
What I think you're describing is known as a hand truck or sack truck.
But whatever you call it, how can needing to use something else possibly be better than having the ability to move it around built in?
@@chillstar Not just in England, Chillstar. But I believe we're on the precipice of the terms being synonyms here in the US as so many people casually use them interchangeably (like sunroof/moonroof). Whenever my neighbor asks to borrow my dolly, I always bring over a dolly, even though I know he means my hand truck; yeah, I'm being pedantic, but he can end that pretty easily :-D
When you absolutely, positively HAVE to waste an entire day...
Totally agree with you
It is sad that someone thinks this is clever enough to video and share 😢
GET OVER IT. CHILD@@sustainableliving880
Haha.
Right
Yes, excellent idea! Great work, inventiveness!
GRACIAS. MUY INGENIOSO.
I love that you made something so useful for your use. Excellent
great thinking ahead ! wow! now if I just could afford the equipment to mount? ha!
Definitely a 10, excellent job.
My Dad had one of these 60+ years ago ,minus the mini wheels and concrete. Welded 3" pipe to steel wheel .added vise to top.Just lean over and wheel it around to where you want to be . Still using it minus the tire. It burned away from all the welding slag!
لماذا تتعب نفسك ؟
يكفيك أن تجعل هذه الآلات على طاولة . 🎉
Nothing like dropping a heavy tool on your foot! Good idea.
That's so awesome!
I had 4 35 inch tires had to get rid of. I cut the side walls off and use them for around base of ornamental grass to keep them from spreading and to keep weeds from growing. Bury them under mulch.
Great idea
I like it, great idea, thank you for sharing
Almost the end &.... Im still like WTF ???
Ok, cool, he made a heavy base for shop equipment 👍
This video provided exactly what I needed!
I can't imagine what this will be. Nice surprise😊
👍🏻👍🏻👍🏻👍🏻 Great idea.
10 for creativity, 10 for complexity, 10 for functionality. A few more iterations needed for practicality.
Good workshop 😊
Great idea for mounting a harbor freight tire changer!
That wont work,i have changed many motorcycle tyres and the amount of force req is a lot, myn is mounted to my concrete floor,it doesnt move. prob ok for bycicle tyre changing.
440lb base might be enough, I'll try it. might need to brace against something bigger for leverage when using
You can't argue with success for a brilliant idea, very inspiring, hope that it will do the same for you, to come up with other brilliant ideas!
I was expecting to be disappointed, but I wasn’t! Great idea, and we’ll done! Congrats!
Hi, thank you for doing a great job! I liked this tire idea. I will take note of some points)
Thank you, it's nice to be useful)
Excelente video 👌 gracias por compartir
Tanks you,gratitude pour votre générosité authentique.❤❤❤❤
Outstanding Achievement!!!! 100% affected!!! I want one how much?
The tire impeded his standing close to the tool, a nice watch but it's a lot of work for a poor result.
The videoing was great.
فكره حلوه والي احى هي المعدات الي عندك ..تحياتي لك ..من اليمن
Geez, that's alot of work just for that !!!!
Brilliant. I am going to build one for my vice. My current stand is not sturdy enough .
What a great idea…my dad would have loved it, made it and used it a lot! (still miss him RIP) I’m wondering if larger wheels could be used by mounting them more towards the center of the tire?
..So smart!....really enjoyed watching!
Wow great job., 👏👍
10/10
Good idea for some things. Other things it is really to wide like for the saw. One would have to stand farther away than ideal to operate it.
could offset it in the concrete.
I just got back whatching the channel UA-cam made it where I could not see your stuff for a while I have made stuff for my shop from what I find on this channel
Excellent idea with great execution. Needed to put flat washers on either side of the plastic wheels. Otherwise the steel next to them will chew them up. 9/10.
If I had the use for it in my garage, I’d definitely consider making one 👍🏻👍🏻🤔
Not that light to walk away with your tools in a hurry😅 great idea!
Yep I like this idea. 🍻👍👍
Genius!!!
Dude i love it!!!!!!! Thank you so much for sharing this ...and it is so beautiful to create something from your mind❤❤❤❤❤😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊
If it's too heavy, and I saw you working hard to get it moving, use a motorbike tyre. But yes. 10/10.
useful tool for me, i will definitely make this app in the near future
First thing that comes in mind, when I see an old tire😅
That's hilarious!
Place the tire to the outer edge of the sheet to save some of the wood.
Does it come in flat pack?
Respekt It's a good Man n❤❤😊😊
Very Nice, If I was build one, my situation would require bigger wheels for taking the stand out into the rough yard. Oh, if only I had some concrete floors,...lol
5 out of 10
Nice ID 😮
excellent job! Hartley [garden grove, CA usa]
'Awesome'! 👍
So smart
That is quite clever. I would be inclined to use a 2" receiver tube to make switching tools quick.
I could have used that tire on my Cayenne, CTTS lol! Hard to find out here where I live! 🤣
Bonjour Superbe réalisation cdt
Excellent
Very good
Super ideka
Interesting
Would make a good boat anchor.
I’m 74 and would never be able to move it after building it. 8/26/2024. 🇺🇸👍🏻
Nice job god bless
Great idea
I just put a very heavy piece of metal underneath my vice and put locking wheels on it must be a way to get rid of old tires
That's nice
Ficou topdlinha 10 👏👏👏👍
Really cool friend !
Bonnnnnnnnnnes travallent ❤❤❤ kentunier ❤عمل ررررررراءع
Well done, 10
Genial idéia .
Clamp a 2 foot round bar in the vice and use it for a handle to tow it around.
Purty dam awesome
I like that muchly, might fit bigger wheels though
Love your ideal
Soy el único que piensa que esa llanta todavía aguanta sus buenos kilómetros; todavía está buena antes de ser considerada vieja y darle una nueva vida?... 😅
Hi, this tire was on my car. Outwardly, it does not seem to be bad yet, but while driving it hummed a lot and there was vibration on the body) You saw her further fate in this video!
Aquí en Costa Rica las carreteras están tan deterioradas que esos defectos de las llantas ni se notan; se cambian porque ya están muy desgastadas y no van a pasar la inspección vehicular, ahí ya se usan para construir muros de retención o muchas otras aplicaciones similares!... 🤭
Excellent idea, thank you for sharing it.
Waste of time, just use a tire and rim, and if you need it heavier then add water into the tire. Also, it does not need the tiny skateboard wheels, to be rolled where you want it.
I'll give it a 9 because of the way too watery concrete. That's a good tool stand for a too small shop.
Obviously, not directed by Alfred Hitchcock.