You didn't mention what the blinking red LED is for. It would be good to mention that it, and the one right next to it (which is hard to see because the red one is so much brighter), blink when the USB is sending and receiving data and Carbide Motion is constantly "talking" to the controller when it is connected, so the light is blinking all the time even if the machine is not doing anything. People regularly post in the Shapeoko groups asking what is wrong because the red light is blinking and people associate a red light with an issue.
Have a S5, regarding the power pendant, can you use the stop button as a normal on/off button or is it just for an emergency? I have been using the main power switch on the controller but wasn't sure if using the em stop button would degrade it long term or something.
Just assembled 5Pro - during initialization, seems the machine is looking for BitSetter on opposite end of the machine. My bitsetter is positioned on the front of the machine (next to Carbide logo). During initialization, the spindle is moving to the back right of the machine, probing down and not finding the bitsetter. Receiving failed homing notification. Any help?
Richard. You need to set the location of the BitSetter. Connect to your machine Go to Settings Disable BitSetter Initialize your machine. Jog the spindle with a bit to the middle of the bitsetter and less than 1/4” above it. Open Settings Click Enable BitSetter Click “Use Current Position” You’ve now told the machine where the BitSetter is located. The machine will reinitialize and touch off on the BitSetter If you continue having issues reach out to: support@carbide3d.Com
While setting up my machine, pushing the y axis by hand, the left and right did not move together, so i know its racked, how do i get the left and right unracked ?
Chris. Reach out to Support@carbide3D.com Include detailed information on your machine type and a short video of the issue you described above. Also send them written details. They will get you up and running.
Sorry this sounds like a very informatize video but he was hard to under stand and I think it would have been better if it did not include the shapeoko 4 just the 5pro
Very helpful! I just just received the VFD spindle today and finished assembly, set-up and initialization.
You didn't mention what the blinking red LED is for. It would be good to mention that it, and the one right next to it (which is hard to see because the red one is so much brighter), blink when the USB is sending and receiving data and Carbide Motion is constantly "talking" to the controller when it is connected, so the light is blinking all the time even if the machine is not doing anything. People regularly post in the Shapeoko groups asking what is wrong because the red light is blinking and people associate a red light with an issue.
I don’t have these options in my setting menu of Carbide Motion
We have moved to a newer version of Carbide Motion. For BitSetter setup, please go here: my.carbide3d.com/gswso/07/
Have a S5, regarding the power pendant, can you use the stop button as a normal on/off button or is it just for an emergency? I have been using the main power switch on the controller but wasn't sure if using the em stop button would degrade it long term or something.
The E-Stop can be used as the main power switch for the machine.
When my router drops down to hit the bitsetter it doesn’t stop. It’ll vibrate and get an error 5
Hey Andrew. Just reach out to Support@Carbide3D.com
Our staff there will get everything straightened away.
Just assembled 5Pro - during initialization, seems the machine is looking for BitSetter on opposite end of the machine. My bitsetter is positioned on the front of the machine (next to Carbide logo). During initialization, the spindle is moving to the back right of the machine, probing down and not finding the bitsetter. Receiving failed homing notification. Any help?
Richard. You need to set the location of the BitSetter.
Connect to your machine
Go to Settings
Disable BitSetter
Initialize your machine.
Jog the spindle with a bit to the middle of the bitsetter and less than 1/4” above it.
Open Settings
Click Enable BitSetter
Click “Use Current Position”
You’ve now told the machine where the BitSetter is located. The machine will reinitialize and touch off on the BitSetter
If you continue having issues reach out to: support@carbide3d.Com
While setting up my machine, pushing the y axis by hand, the left and right did not move together, so i know its racked, how do i get the left and right unracked ?
Chris. Reach out to Support@carbide3D.com
Include detailed information on your machine type and a short video of the issue you described above. Also send them written details.
They will get you up and running.
Sorry this sounds like a very informatize video but he was hard to under stand and I think it would have been better if it did not include the shapeoko 4 just the 5pro