Installing a Metal Roof on the 12x16 Post and Beam Shed Kit
Вставка
- Опубліковано 19 січ 2023
- All of our Gear can be found on our Amazon Storefront.
www.amazon.com/shop/breakfree...
There is no extra cost, we just get a small percentage of purchases.
Jamaica Cottage Shop Quality Outbuilding Kits
jamaicacottageshop.com/shop/g...
We do receive a small amount of commission from your purchase but it does not cost you any extra.
We recently built this 12x16 Jamaica Cottage Shop Gable shed with an 8ft Lean to, it was so solid and really felt like a quality build. I am super jealous that its not on my property. If you are in the market for a shed or outbuilding make sure you check them out. The metal roof went on pretty darn nice, as long as you are pre punching your holes and taking the time to have precise measurements you will get that professional look!
www.tubebuddy.com/BreakFree
Music;
Happy Youre Gone; Zorro
Showed Me How To Heal; Victor Lundberg - Навчання та стиль
![ОРБАН приехал к ПУТИНУ и "отчитался" о поездке в Киев 😁 [Пародия]](http://i.ytimg.com/vi/_0ukDovOWq8/mqdefault.jpg)
Exactly the video I needed for my metal roof project! Thank you very much!
Glad it helped!
Great Job...really enjoying the work you are doing!!
Glad you enjoy it! Thanks for the support.
Fantastic job! Everything you've done is top quality. Good to see you put plenty on good sized purlins in. It makes it so much easier to work too 🤠😁 🇬🇧
Thanks Liam! Right? much easier to zip around the roof.
@@BreakFreeHomestead yes, especially on a steep roof.
Looks great awesome job! Do you know the gauge of the metal panels, e.g. 26ga or 29ga?
hi thanks for posting this. what is the spacing of the strapping/
Hi GM house looks great
Can I know please what kind of metal is used for roof? Is it any specific metal? and what is the thickness of the metal?
I would have thought you would have a rubber or foam type gasket for roof crown. I am afraid of moisture and the direct air flow will lead to rot
How would this rot? This is an unheated, uninsulated building? This still has airflow with the cap.
what size are purlins?
Buen trabajo boy Acer algo así
¡Muchas gracias! ¡Gracias por apoyar nuestro canal!
Why no plywood and tar paper underlayment on roof?
Serious question. Do you not need flashing or roof edge? Do you have any water issues? I’m thinking of doing it the same way you did just curious
No it wont drip back, and theres a decent overhang so you don't have to worry. I believe they have an optional drip kit for a more finished look on most of their kits.
Is that the screw pattern that they specified? I’ve never seen a metal roof screwed off that way.
Yup, it’s screwed off right! 🤫
Cut-off wheel was a mistake I made too. Jagged mess with a rust prone edge. Much better to take the panel off and use snips.
Yea, i think it could rust whatever way you cut it without refinishing. A nibbler might be the way to go.
unfortunately i dont work with metal all the time.
@@BreakFreeHomestead Tried a basic nibbler too. Wanders easily and leaves tiny shards of metal everywhere. Honestly, a good set of off-set snips are worth the money. Snips pinch the paint layers closed leaving the edge more resistant to rusting. Cut-off wheel burns the paint and exposes the edge to rust.
@@BreakFreeHomestead Me neither. Just finished my own shed, so self taught. (The things we learn on the journey eh?).
It looks amazing. Boing that you are not using ply wood or Osborn underneath the metal panels, will it get hot in the summer?
Aren't you supposed to use foam seal under each side of ridge cap?
Hmm, what does that do? minimize the air flow?
@@BreakFreeHomestead I think it is preventing water from coming under the ridge cap
Can't imagine why you would use aluminum flashing between the two rows of roofing panels?
It's what it called for, probably because its from a change of slope. Although this one is barely noticeable.
@@BreakFreeHomestead Smart idea, gives you a little extra insurance from leaks, wind etc. It's a shed after all.
Ok, it's been like a year. How's it holding up? Would you have done anything different?
I actually build this for a customer, they never said they had any issues. The thing was pretty solid
Don’t understand why the screws are not all on the ribs.
Okay.
Because there's nothing under the ribs, and the manufacturers say to put the screws in the flats.
Find this shed here; jamaicacottageshop.com/shop/gable-12x16-pre-cut-kit/aff/BreakFreeHomestead/?campaign=12x16GableShed
No rope to keep you from falling off :O where's your safety harness.