Setting up Stickers in Silhouette for Print and Cut by Silhouette Secrets+

Поділитися
Вставка
  • Опубліковано 27 січ 2025

КОМЕНТАРІ • 99

  • @selftuff
    @selftuff Рік тому +2

    thanks, you r such a good teacher.... Best tutorial I've seen so far....🥰

  • @miscreacionesbypc
    @miscreacionesbypc Рік тому +2

    love this video! like so much how you explained everything!

  • @Foba_Bett
    @Foba_Bett 3 місяці тому

    This is the best video from start to finish for my exact kind of sticker setup! Thank you!

  • @AdartseCreations
    @AdartseCreations Рік тому +1

    Awesome! Very informative.

  • @johnniejoemer
    @johnniejoemer Рік тому +3

    Awesome video! I've done print and cut, but learned so much this morning. Thank you!

  • @melvinabrand5225
    @melvinabrand5225 Місяць тому

    Thank you so much for this beautiful take❤....you really saved me

  • @traceybartlam7737
    @traceybartlam7737 Рік тому +1

    Fantastic idea full of info, thanks

  • @Craftastical
    @Craftastical Рік тому +1

    Thanks for all the tips, much appreciated :)

  • @hannalyons4376
    @hannalyons4376 11 місяців тому

    Thank you for SO many tips! This is a keeper!

  • @hollys1498
    @hollys1498 Рік тому +2

    HI AND THANKS! I have been struggling to print & cut some address labels. Your directions were great. Thx

  • @maryannhall3712
    @maryannhall3712 Рік тому +1

    Loved your video! I've used print and cut for over 10 years, and I still learned new things. Thanks so much.

  • @karenhaley81
    @karenhaley81 Рік тому +2

    Thank you so very much! Finally got it. I plan on enrolling in some of your classes - just have to wait until my credit card closes this month to begin charging the next months expenses! I also joined your FB page. You are a Fantastic teacher ;-)

  • @mc.haulotte
    @mc.haulotte Рік тому +1

    You're awesome! Thanks so much for a very clear tutorial!

  • @vickiep3641
    @vickiep3641 Рік тому +1

    This was VERY helpful! I need to try printing/cutting stickers again!

  • @christinemagnuson3290
    @christinemagnuson3290 Рік тому +1

    Thank you so much!!! I used to dread print and cut but tonight after watching your video it cut perfect on the first try. I'm so excited to do more. I also love your Facebook page.

  • @BOC28
    @BOC28 4 місяці тому

    Really clear and helpful. I keep playing with print and cut...the mis-cuts are learning opportunities! But I agree, better to have pages with proper cuts than jamming in too much and ruining it. This was full of reminders and tips! Thank-you!

  • @webgirl2381
    @webgirl2381 Рік тому

    Super video! Thank you very much! :)

  • @FloraFaunaLegends
    @FloraFaunaLegends 5 місяців тому

    I got my Cameo 5 and this tutorial was perfect! I just made my first stickers. Thank you.

  • @RobertJurotich
    @RobertJurotich 10 місяців тому

    Your show is a great,

  • @UpandiTembo
    @UpandiTembo Рік тому

    You are my hero! Thank you so much!

  • @kimmccrary1037
    @kimmccrary1037 Рік тому

    Great video!

  • @teresap2740
    @teresap2740 Рік тому +1

    Thank you!!

  • @iamyou6073
    @iamyou6073 Рік тому

    super thank very much. i love you

  • @sandydouglas3476
    @sandydouglas3476 Рік тому +1

    this was awesome, do you have more videos or do you do these on a regular basis somewhere.

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому

      Yes, more videos on the UA-cam channel
      youtube.com/@SilhouetteSecrets?feature=shares
      6 years of tutorials on the blog
      silhouette-secrets.com/
      And online step-by-step classes too
      silhouette-secrets.teachable.com/courses

  • @soniajohansson6093
    @soniajohansson6093 11 місяців тому

    Tack!!!👏

  • @chuckkern5538
    @chuckkern5538 Рік тому

    I seen on another sticker video if you create two cut lines change the inner color differently then when you go to cut advance will let you choose the inner color to cut the sticker at force 1, then reload your sheet then at cut the outer color that has a different cut force to cut all the way through the paper then you just have everything as indivisual stickers theat looks great

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +1

      Yep! Multiple ways things can be done in the software. But no need to reload the sheet, you can do it all in one go of you are using an autoblade.
      You do not want to Unload the mat or there's a chance it might not line up exactly again.

  • @blynn6240
    @blynn6240 Рік тому +1

    Actually, I chose your video because it was so long… I thought to myself “hmmm I bet she has a lot of tips!” Lol and indeed you do- thanks for making it. I do troubleshooting too (in another arena) and an ounce of prevention is worth a pound of cure… its totally a cliche for a reason. That’s 26 minutes well spent in my book.

  • @zandrean8307
    @zandrean8307 Рік тому +1

    If I add a laminate sheet on top do I have to chenge the cut settings

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +2

      Yes. Test cut, test cut, test cut.
      It can also affect the optical eye reading the registration marks accurately if you cover them.

  • @mistifeyed
    @mistifeyed Рік тому +1

    If you’re printing on clear sticker paper, would you fill the circle in white and then reduce the opacity to zero?

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +1

      It's not necessary as most printers do not print white as a color.... white printers are very expensive, so most users don't have that option, but yes, if you happen to have a printer that does, then you would use a different option or turn the opacity down.

  • @billik40
    @billik40 Місяць тому +1

    Do I need to wait for the ink to dry before placing the stickers? The ink looks like it’s beading up.

    • @SilhouetteSecrets
      @SilhouetteSecrets  Місяць тому +1

      Yes - the ink needs to be completely dry.
      If it's beading on your material, then you'll need to adjust the printer settings for the material and make sure your printer is compatible with the material finish.

  • @randomshortcleps
    @randomshortcleps 11 місяців тому

    Hi, thank you for the video. When I cut the machine cuts the entire page and not just the upper page as in your case. What mistake am i doing. Please answer.

    • @SilhouetteSecrets
      @SilhouetteSecrets  11 місяців тому

      I don't understand your question. The machine will cut wherever you have cut lines turned on.

  • @karenhaley81
    @karenhaley81 Рік тому +1

    Why doesn't my text stay grouped within a circle? I'm trying to create a label with text in the center and then on the inside of the circle. Whenever I want to duplicate it to fill a page, only some of the text is duplicated - the center stays open - it does not copy the center text. I've spent countless hours starting from scratch again, rewatching the video. I recently upgraded to the Silhouette plus software. I'm so frustrated!

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +2

      Did you use the Text to Path to bring text in the shape of the circle? If so, did you right click on it and choose Convert to Path before grouping and copying?

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +2

      Here is a little bit more on the Text to Path, if that is how it was created.... silhouette-secrets.com/2022/04/10/lets-explore-v4-text-to-path-2/

    • @karenhaley81
      @karenhaley81 Рік тому +2

      Thank you - I’ll give it another whirl tomorrow. I have not used the text to path. I appreciate your time & response!!

  • @trishmadore2104
    @trishmadore2104 Рік тому

    Please, again, what exactly Staples sticker paper do you recommend??

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +1

      This is the Staples Sticker paper I've been using for years - amzn.to/3RWQe30 affil

  • @ErickTiki
    @ErickTiki Рік тому +1

    I have a problem with the studio...when I copy an image to fill up a page then print it out 4 or 5 images will be fine and the rest of the images on the page will look faded out....what on earth is causing this?

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +1

      No idea - this is the first time I've ever heard that happening. It looks faded on the screen or on the print out? or both?

    • @ErickTiki
      @ErickTiki Рік тому +1

      @@SilhouetteSecrets on the screen looks fine normal colors....when it prints out is where I have my problem.

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому

      @@ErickTiki That is odd behavior and not something I've encountered when troubleshooting. If you save as a pdf file and print outside of Silhouette - does it still do it?
      What version of the software are you currently using? Under Help > About Silhouette - what are all the numbers? For instance, v4.4.554?

    • @ErickTiki
      @ErickTiki Рік тому

      @@SilhouetteSecrets Im using the business edition 4.5.152ssbe Build#2847980/2202.01/22.1 have not tried as you suggested I will do that and report back....I just had a thought and will also try a different printer.

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому

      @@ErickTiki I would also recommend uninstalling v4.5.152 and install v4.4.554 and see if it still happens.
      ua-cam.com/video/C_1tKu9gg9I/v-deo.html&feature=shares

  • @pattyscharff6087
    @pattyscharff6087 Рік тому

    If I only use half of the sheet, can I print something out on it later?

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому +1

      You can try, but it may jam in the printer. Each printer will vary in if it can handle that type of work or not.

  • @jadenjoslyn
    @jadenjoslyn 9 місяців тому

    Is there a specific way to set up uploaded png files for print and cut? I have seen many different ways to create print and cut files but I never know what type of file being used or there from the design store, or seems to be completely different version of software. I am transitioning from Cricut so have always used the offset tool and then flatten to create kiss cut stickers, but it doesn't seem that simple in Silhouette studio! If you have any specific resources for print and cut png images, I'd love to check it out!

    • @SilhouetteSecrets
      @SilhouetteSecrets  9 місяців тому

      It should be as easy as Open PNG, create the cut line, and you have your sticker.
      Silhouette does not use "flatten" - it doesn't have to be flattened at all.
      Select the cut line and png image and group. Then your object moves as one.
      If you have Autotrace on - it will trace transparent PNG files - but there can be bugs and it can be data heavy.
      silhouette-secrets.com/2020/08/09/lets-explore-v4-4-autotrace-png-files/
      Or you can trace the PNG to get the outer cut lines - here are several Trace tools
      silhouette-secrets.com/trace-panel-tabs/
      Or you can simply draw a shape as I show in the video - here's more on the drawing tools - silhouette-secrets.com/2019/09/17/lets-explore-v4-drawing-tools/
      The exact steps depend on what kind of PNG you are opening and what you want to do with it.

    • @jadenjoslyn
      @jadenjoslyn 9 місяців тому

      @@SilhouetteSecrets Thank you so much, I will review all these. I noticed when I open the png it already has a red outline around the image. If I want to create an offset it looks like there is two cut lines - would I just select the inner cut line to no cut?

    • @SilhouetteSecrets
      @SilhouetteSecrets  9 місяців тому +1

      @curlyjaden yes, or just delete the inner cut line if you don't need it.

    • @jadenjoslyn
      @jadenjoslyn 9 місяців тому

      @@SilhouetteSecrets Thank you so much, just made my first cuts - wasn't kiss cut but I'm sure I can adjust that! I appreciate the quick responses!

  • @Diana_here9
    @Diana_here9 11 місяців тому

    Hello . What if I want to print & cut my own pic , how I can do that ?

    • @SilhouetteSecrets
      @SilhouetteSecrets  11 місяців тому

      Open it in Silhouette.
      Add cut lines by either drawing a shape around it or Tracing the image and set up as a print and cut.
      silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/

  • @mariamarcelo702
    @mariamarcelo702 10 місяців тому

    Hello, I was wondering how I can remove background from a photo on Cameo 3? I don't seem to have the magnet trace. Help please...

    • @SilhouetteSecrets
      @SilhouetteSecrets  10 місяців тому +1

      There are several trace tools.... what you have will be dependent on your level of software upgrade....
      silhouette-secrets.com/trace-panel-tabs/

    • @mariamarcelo702
      @mariamarcelo702 10 місяців тому

      @@SilhouetteSecrets so should i upgrade the software? I had issues last time, so I had to uninstall years ago. I just want to trace around the image I want from a photo

    • @SilhouetteSecrets
      @SilhouetteSecrets  10 місяців тому +1

      @@mariamarcelo702 upgrades are different than updates....
      Upgrades = silhouette-secrets.com/2023/10/13/silhouette-software-upgrades-my-favorite-features/

    • @SilhouetteSecrets
      @SilhouetteSecrets  10 місяців тому +1

      An update may be where you had issues
      silhouette-secrets.com/silhouette-studio-updates/

  • @kayskreations1241
    @kayskreations1241 Рік тому

    What would cause the diagonal lines under the registrations page to be faded? Mine are not as dark as yours and i can barely see them

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому

      I'm sorry... I don't understand. Do you mean the page transparency to reveal the grid of the mat?
      Page Setup panel - Tab 1 = transparency slider to reveal grid.
      Is that what you mean?

  • @vampiregaming2488
    @vampiregaming2488 11 місяців тому

    Can we save cutting files?

    • @SilhouetteSecrets
      @SilhouetteSecrets  11 місяців тому +1

      Yes. File > Save in the top left corner. I save all files to my external hard drive.

  • @ReginaNailsBfly
    @ReginaNailsBfly Рік тому

    I've tried everything you said and still have issues

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому

      Without seeing what you are doing, I can't even guess why it might not work. I'd recommend trying again with the video and follow it step-by-step, watch it closely to see why it's not working.
      Is it because something wasn't selected when you turn the cut lines off?
      Is it the design? Is it how it was created? Is it grouped together?

  • @moonlights9490
    @moonlights9490 4 місяці тому

    Thank you! bcoz watch this i can cut sticker now 😍
    and i hope you made tutorial for A3 size 😭♥️

    • @SilhouetteSecrets
      @SilhouetteSecrets  4 місяці тому

      All the same steps should apply for any size print and cut. You simply need to change the Media Size on the Page Setup Panel and your printer settings select the correct page size. It all adjusts for you.

    • @moonlights9490
      @moonlights9490 4 місяці тому

      its mean A3 size setup file is A3 too? ​@@SilhouetteSecrets

  • @o0oTyPow
    @o0oTyPow 3 місяці тому

    for 2 years I have been wanting to make stickers. I tried this step by step and the lower right still cuts way off.

    • @SilhouetteSecrets
      @SilhouetteSecrets  3 місяці тому

      @@o0oTyPow please follow this step by step for a test. .
      silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/
      Use all the default registration marks. Use a Silhouette cutting mat and hold the mat completely level or slightly elevated.
      How does it cut?

  • @NaskaZo
    @NaskaZo Рік тому

    It's shows ''registration Failed'' and don't even try to cut. Where am I wrong and how to fix that?

    • @SilhouetteSecrets
      @SilhouetteSecrets  Рік тому

      That's usually something wrong in the setup or in how the mat is being loaded. Without seeing actual photos, I can only guess.... follow this setup exactly and make sure all the marks print, everything matches exactly, and the mat is loaded properly
      silhouette-secrets.com/2020/01/28/lets-explore-v4-print-cut-basics/

  • @W8VHS
    @W8VHS 5 місяців тому +1

    Thank you !!!