Fix Nintendo Switch Not Charging - M92T36 Charge Control Chip Replacement

** We fix all game consoles and offer free estimates: www.gogamers.com **
** Send us your game console to be repaired: www.gogamers.com **
TOOLS USED IN VIDEO:
Solder equipment:
Solder iron - amzn.to/3FdWycy
Solder tip - amzn.to/3tbRUcQ
Solder Tweezers - amzn.to/33ijwSS
hot air station - amzn.to/3FhfOpz
MICROSCOPE EQUIPTMENT:
microscope - amzn.to/3qbg3OV
microscope lens - amzn.to/3GhmntK
Microscope led - amzn.to/3GgHZ9M
Cheap Microscope - amzn.to/334LP7s
SOLDER TOOLS:
Solder - amzn.to/3f9SeAM
Insulated copper wire - amzn.to/3FbQcKX
Kapton tape - amzn.to/3r5edhO
Tweezers - amzn.to/3FdDOdt
Blade - amzn.to/3tdXrzK
Freeze Spray - amzn.to/3FbQEc7
Flux - amzn.to/3qdOYKI
Conformal coating pen - amzn.to/33m38jW
UV flashlight - amzn.to/3Ggd1hP
Desolder braid - amzn.to/3HUDQst
Heatgun - amzn.to/3naTSq2
TESTERS:
Voltage amp tester - amzn.to/331Vrjj
On Screen Multimeter - amzn.to/31KTo2w
Cheap multimeter - amzn.to/3feHMaV
BENCH STUFF:
Workbench - amzn.to/3FbuEya
Chair - amzn.to/3qaMJbe
Soldering fume extractor - amzn.to/3f5WSQf
Mat - amzn.to/3FbGLv0
Outlets - amzn.to/31L6jBA
Disposable gloves - amzn.to/3GcWCef
Fine tip snippers - amzn.to/3tdm2Vp
Iphone cable - amzn.to/3qaNscs
Air compressor - amzn.to/3zQvXl2
SCREW DRIVER AND DRILL:
Mini Drill - amzn.to/3K8rKhp
Torx bit set - amzn.to/3f89Gpb
Phillips bit set - amzn.to/34vHCdb
CAMERAS AND MIC FOR MY SETUP:
Main Camera - amzn.to/3zG1gPo
Main Camera Lens - amzn.to/3FaBzrm
Overhead camera - amzn.to/3GfbkkD
Microscope camera - amzn.to/3qaX32X
Mic - amzn.to/34vIvT3
Capture card - amzn.to/3f8wF3t
In this video, I'm going to show you Fix Nintendo Switch Not Charging - M92T36 Charge Control Chip Replacement
Are you having any of these issues? Nintendo Switch not charging? Nintendo Switch not turning on, Nintendo Switch wont hold a charge? Well watch this video as I repair this issue by replacing the M92T36 Charge Control Chip on the Nintendo switch motherboard.
FIXING the Nintendo Switch M92T36 Charge Control Chip issue can be difficult. If you are in need of a repair please contact us to organize your repair! We have repaired 100s of Nintendo switches that wont charge or turn on in our stores.
-----------------------------------------------------------------------------------------------------------------------
If you love local video game stores make sure you check out any of our locations in Omaha and Lincoln Nebraska. We have been open in Nebraska for the past 26 years and we hope to continue to serve!
50th and Ames Omaha
124th and Center Omaha
27th and Superior Lincoln
[phone] call us today or check out our website at gogamers.com/ if you are wanting to get a repair done!
gogamers
omahagamers
omahagamers
#OmahaNebraskaVideoGameStore
If you need your Nintendo Switch thats not charging repaired please goto gogamers.com/repair

[@matthewfrancis3589]

You need more subscribers your content is great!

[@bierbrauer11]

Wow, there’s more than one of us!

[@cryangallegos]

I suspect my m92 chip is bad and thought I could do the repair myself with my new hot air setup....until I saw how small it actually is...now I'm thinking I'll pay a repair shop to do it. Honestly my biggest fear is that they'll make a mistake and then just tell me my board is bad

[@tonyrivera6575]

I thought the same so I got a 40 microscope on Amazon which is pretty good I must say. I thought the same thing myself and I changed my usb port 1st and surprisingly I did it but the chip was my problem. It really seems scary at 1st but not really that bad

[@salenamcdermott5315]

A repair shop will tell you they can't do it and send you here to UA-cam

[@MrProthall]

If they do tell you it's bad, what changed? It's still broken. No need to worry if nothing changes.

[@nt7998]

do you only need flux paste for this job? I’ve seen other people do repairs and sometimes that is put solder before putting the chip on? any explanation

[@Ricanplayadee]

What do you charge for a repair like this ? Awesome content

can you share sorroundings smd resistors around M92 on switch OLED? I lost two of them and I have no clue what to buy... :(

[@ValentinZagura]

What is the holder that you are using to hold the motherboard when repairing it? 00:08:08

[@justin01ty]

I work in a repair shop and just started working on these, this would literally fix all my issues

[@efrainrcantu]

What do you think is the problem with a Switch charging, can dock, but is not allowing data transfer/mass storage?

[@sniperdemon1]

Repairing my own and i can't get it to come off , it doesnt look like the heat is too low on my heat station, i hold it for what it seems like a long time end yet it doesn't come off

[@aaronjordan3774]

This is so frustrating at 440 the chip won't come off how long do you heat it at 440

[@Ricanplayadee]

And one more question do I have to take the whole motherboard apart in order to replace this chip

[@bboyalanleung123]

You dooo😂

[@erickcastillo9437]

How can I send you my nintendo switch??

[@geezmagee1576]

Can I send you my switch think it needs this

[@josiahdudoit2064]

Do you repair anyone switch and if so how can I send you my switch?

[@juscelino2253]

any way to test M92 before removing it?

[@Aspecturr]

if you get an ammeter and set it to continuity mode (the mode that beeps when a circuit is created) you can check around the M92T36 chip for short circuits. But, it will cost you like $15 to replace M92T36 so I'd just replace it anyway.

[@juscelino2253]

@Aspecturr thanks. i already ordered some ICs (m92, pi3, bq and usb-c port lol). i will start replacing m92, i hope i dont receive bad components