Відео

OK, well thank you. I’m gonna take it to repair.

Where can I find the reballing stencils for the PS5 ram?

I have this same problem. How much is the repair?

Nb don’t all that

lifesaver, I removed the part and reconnected it and it worked!

Mine comes on but blue light doesn’t. Just had hdmi replaced . Advice ?

Mines won't take a disc says there's a dirty disc in there and sounds like a weed Wacker when I press eject plz help

Worries me to see a youtubers comment section with viewers asking questions,and the UA-camr doesn't respond , so I came to the comments section to say or basically to give you a small tip , Insulated wire. Your method works I don't take away from that , but if you want an easy way. Take your point A of the insulated wire measure it to point B. Cut the length needed, and instead of heating the points with your soldering iron, like your doing . Take a small nail file and with the smoother side run ur points A and B side to side lightly while spinning the wire to remove the insulation, then with a cotton pad and some medical grade rubbing alcohol clean the points of the residue , and ur reading to tin point And B of the wire with one run of the soldering iron with minimum heating time , and once the connections of the board are tinned it's much easier to solder. Your a pro at electrical repairs no don't about that , I'm a veteran tattoo artist who is learning these circuit board repairs on my own from online reading forums of professionals as urself and watching tutorial videos like this one, your content is easy to watch and ur patience in doing the work was relaxed. Keep up the good work and don't take my message as I'm a know it all trying to teach you something , I just used to use it method and found it more difficult than cleaning the points prior to tinning them . Try it and if it works for you let me know and if not let me know why not so I can learn , I'm currently stuck on an s series with the same issue but the traces where completely missing so it's not as a walk in the park as yours lol. Names Danny ,

have a PCB holder, yet no camera holder. Lol

How much u charged so I know when im looking in my area

I clean roller also every thing s smooth but when i insert disc it stuck and do not pull down when i restart ps4 then disck go proper position and work please sole my ps4 problem thanx

What could it be, if HDMI and VGA are not working on a ps3?

I can see in the video the yellow jumper is connected to pin 1 and 2. For the CH341 board to work move the yellow jumper to the clearly marked number, pin 2 and 3 so that pin 1 is not connected. This is on the side where wires are connected to TX RX and Ground on the CH341 board via pins and not the side where you soldered the 3 wires. Then serial port will be recognised and it will be able to read. Hope this help.

Hello, does this fix games crashing with code CE-108255-1 ? Thanks for your answers guys

Hi anyone needing this done I'd look no further than gogamer/repair super nice guy . Sent mine off today

Thanks for the video, at 71 I'm helping my 14 year old granddaughter take a look at hers. You are doing a great job, keep it up.

can you give us a link for that ssd reader?

Big Rone?!

Dave, I saw the Tools used in video reference but i do not see the reball jig link listed there. Can you be so kind as to provide the link for that? Thank you. Great vid. :)

How much I need this plsssss

I need a step by step of you actually doing it

I think i have this problem

Such a easy fix !

If it's going to cost 2 to $300 as much as buy a new one

whats the name of the blue screwdrivers

I bet it's from 2 and 3 amp chargers and playing while charging at 75 brightness

Where are you located

Hey I had a power outage while playing MLB The Show 24, PS5 died, TV and Monitor didnt, No beep or anything it just didnt turn on, I ordered a new PSU (checked it was the correct model, exact one so it cant be that) and it still wont turn on, any ideas on how i Can Fix it? Or is it dead?

this repair could be as simple as removing the nvme from the slot, but no sony has to always complicate things. FU sony

R u in ethiopia

Perfect video -thanks so much!

How did this hold up in the long run?

How much would it cost for a job like this?

Greetings from the south of Brazil friend What diameter solder balls did you use on the processor?

Hello sir what does this usually charge for this procedure

My ps5 crash in the safe mode before I can seethe menu

Curious what soldering iron and tip did you use and are you able to solder all those tiny pads after it was called down? I think I need a hotter iron but have a few pads that need touched up but my iron won't do it. Great video.

Thank you!

Thanks a bunch.

Fuck that lol I’m taking mine to a shop

Just did all this to find I ordered a ps3 slim hdmi port

Bro isn’t this guy who copied punch made dev trying to scam ppl off the cash app glitch 😂😂😂lmfaooo bro rap career ain’t doing the best

animation file no longer avaliable.

awesome , my connection was lose and cleaning and pressure on flex helped , thank you very much

I got scammed , they said everything worked and showed me a video and once i plugged in it didnt work. Never again will buy a used system. Only buying from store brand new in the box. My systems always lasts 20 years.

But how do you transfer your saved data?

I replaced my power supply and now it shuts off on me or says its overheating or keep console cool. I kinda feel it might need new fan, but i don't know for sure. Any advice.

What solder do you use?

can u share the profile do u use on the Achi

Did you glue the screen down or only the digitizer