Chevy Traverse/Buick Enclave/GMC Acadia 2009 2015 burning oil quick fix!
Вставка
- Опубліковано 3 чер 2022
- Your vehicle has many different parts that function in many different ways to make it run correctly. Over time some of these parts will go bad and need to be replaced. The Breather valve on your Vehicle is an important part, and when it goes bad, it can cause your vehicle to burn excessive oil. This video shows you how to replace or modify a Breather Valve on a Chevy Traverse, Buick Enclave & GMC Acadia from 2009-2017.
To Support Flashback502, please send donations to:
PayPal: www.paypal.me/Flashback502
Or
Fan Mail, Products & Donations:
Flashback502
Po Box 20201
Louisville, KY 40250 - Навчання та стиль
Thank you so much for this video, I am a mechanic with over 40 years experience but you never stop learning.
Good video. It's worth mentioning that when placing the valve back in after drilling and cleaning out, or replacing with a new one, the easiest method to use is socket and hammer - place the valve in the hole, put socket over valve and tap on the socket with the hammer.
Thanks for info. Glad could help Please subscribe like and share 🙏.and check out our other helpfull videos.
I've heard of doing this BUT You showed me the size and how to! I sincerely thank you !!!
Your welcome hope it helps, thanks for tip. Please subscribe like and share
Perfect, just the type of video I need. Short, clear and to the point. Greatly appreciated.
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Very informative, explained the modifications and showed how it's done. Best of three videos same subject way to go man!
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
excellent description on directions
I discovered one of those trim tool pry bars actually works great at prying it out of the manifold.
Thanks for tip
Good scoop, thanks brother!
Very informative video and hopefully no more oil comes out going to my intake
Thanks. My Enclave is burning a lot of oil. I will be looking for this. 👍🏼
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Thanks for the information, very helpful. You helped me out a lot, and I appreciate it. Thank you
Your very welcome
will definitive try. keep it up
Thank you for the video because I need to check the one on my 2009 Chevy traverse
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
finally SOMEON SHOWS HOW , thansk so much
You're welcome! Glad could help Please subscribe like and share and check out our other helpfull videos
Spread the word. Apparently 2014 and newer comes with bigger hole to fix this GM problem. I drilled my holes on my 2012 traverse, it was consuming oil
Thank you
Had a really hard time getting mine out. The new one slid in the hole much easier than I thought it would, there is some drag but I can pull it back out with my fingers, do you know if this is normal? There was no grommet or rubber seal that I could see when removing it and looking at diagrams it doesn't appear to be anything other than the metal PCV valve. Appreciate the video!
Did that to mine, 2010 Traverse. Still burns oil like crazy. No leaks. What's on the opposite end of the hose on this part? A PCV Valve? Can these go bad also?
How did you get it out?? I can't get mine out!!
Could this cause loss of power and the engine to rumble when putting in gas?
So if the holes are clogged how does oil get through it to be sucked into the engine? I'm confused
I have a 2011 lacrosse that eats oil+ had oil in the air hose and that pcv valve stuck in his place.. how can it be extracted out without breaking it?
I did this to my 2009 chevy traverse and still burning a lot of oil.
Mine’s a 2018 and burns oil Is it the same? Thanks
is this pcv valve rattle?? bcz i buyied new fr GM..but found it not rattle internally ?
One would think that being clogged it would prevent oil from being sucked into the engine? Am I missing something here?
Dude I don't have all those tools can I buy one from auto stores,,and if I buy new one how long will it be good
I have a 2016 Chevy Traverse Lt AWD my PCV value tip of it broke of of any help how to get it out would be appreciated I was told maybe a trim tool fork tool would get it out with taking of intake manifold and valve covers. I priced out value cover gaskets at AutoZone dam $92 for the set plus intake manifold gaskets another $50 this is ridiculous
My Buick is sputtering , got tune up, changed air filter I’m wondering if it’s the pcv valve now because there’s a little oil in my intake, and rpm slightly jumps on acceleration like it’s not getting enough of “something “ idk
Yes definitely could be. Please subscribe like and share 🙏.
Is the PCV orifice on Enclave 2016 supposed to be removable? All part stores say the orifice fits Enclave up to 2015, but nobody sells the PCV orifice for 2016, although 2016 has the same PCV tubing. I can't remove the orifice on my 2016, the sealant is so strong and there is no room back there. I just insert an iron wire very deep to unclog the hole.
Sorry not sure on the 2016.
I am working on the same car and the pcv valve is completely stuck in the head
👍
Your welcome glad could help please subscribe like and share and check our my other helpfull videos.
Looks like a pcv valve. You can usually get one at the auto parts store. Don't drill things that could drop metal in you engine.
If you are coming here for a quick fix please note that the oil consumption problem is a flaw in the engine. And is a known issue. The only way to fix it is to rebuild the engine or buy a new one. GM had known about this issue for years now. There is no quick fix. Sadly.
Oil burn could be from a cylinder misfire too
Thanks for tip please subscribe like and share and check out other helpfull videos.
The 2010 Cadillac SRX 3.0 same thing
Thanks for info. Please like, subscribe, and share.
I buy new part. chevy traver 2010 still burn oil .
How in the hell are you getting your arm in there? I can't even touch it. You must have stick arms.
Lol
If you grew fromi tasters to