How to Install Air Lift Suspension Part 1 - 2015+ WRX STI

Поділитися
Вставка
  • Опубліковано 14 жов 2024
  • www.subispeed....
    We're bagging our STI and Kevin is going to walk you through the process!
    Don't forget Air Lift Performance Suspension is 15% off with no code necessary through the end of April!
    Torque Specs:
    Front
    Camber plate to chassis 15Lb.-ft
    Camber plate adjustment 11Lb.-ft
    Lower mount bolts 115Lb.-ft
    Brake line tab bolts 24Lb.-ft
    Leader line threads 1 3/4 turns beyond hand-tight
    Rear
    Upper shock mount nuts 22Lb.-ft
    Lower shock mounting bolt (2015+ Subaru [VA] WRX/STI) 59Lb.-ft
    Lower shock mounting bolt (Subaru GR/BRZ/86) 89Lb.-ft
    Sway bar end link bolt 28Lb.-ft
    ------
    Looking for the most performance out of your car? Pick up a Cobb Accessport and feel the gains right away:
    Cobb V3 Accessport: www.subispeed....
    Want to change the exhaust note of your car? We have plenty to choose from:
    www.subispeed....
    Or maybe you're looking for a new set of wheels to set you apart: www.subispeed....
    ------
    Instagram - / subispeed
    Facebook - / subispeed

КОМЕНТАРІ • 39

  • @norwinskgego
    @norwinskgego 4 роки тому +10

    Shout out to subispeed for always pushing out installation contents. I installed the dashboard Cobb Accessport dock today it looks great.

  • @mybrokengoldwing
    @mybrokengoldwing 4 роки тому +6

    You made it look way easier than when I installed mine. I took the rear apart the hard way apparently. Routing through the inside isn’t as hard as it seems. Better piece of mind knowing it’s not being exposed to the elements. Love the vids. Subispeed ftw!

    • @tackcoma5280
      @tackcoma5280 4 роки тому +1

      How is it holding up? I get to many negative review. Like it going to break on you while traveling and you be Shit out of luck stranded.

    • @brendanfogel4573
      @brendanfogel4573 3 роки тому

      @@tackcoma5280 nah bro it’s reliable the only thing is you got make sure the air line isn’t exposed to something hot under the car. You have to route it down the middle under the car. This will absolutely fuck up the suspension and would leave you on the road. Make sure this is perfect and you’ll be good

  • @nabaddame5726
    @nabaddame5726 4 роки тому +5

    Wouldnt it be easier and a cleaner install if you run the black lines thru the interior like you would an amp power wire rather than putting so many screws into the car? Or is this safety related so the lines don't pop?

  • @cslammon
    @cslammon 2 роки тому

    I wish these videos showed what to do next. Is it okay to put the car on the ground with no air in the bags yet? Do you turn it on wheels off the ground? Etc

  • @stevenpires
    @stevenpires 4 роки тому +1

    Is it safe in the winter with the lines outside? Even inside that plastic they could break by a rock or something. Nice video, just waiting for part 2!!

    • @SubiSpeed
      @SubiSpeed  4 роки тому +1

      Yes, they are still safe underneath the car. If you hit something hard enough to cause damage in that area, you're going to have extensive damage to other parts of the car like the suspension, wheels, and etc. Unless you drive over a boulder, a rock won't damage the lines.

  • @bryampachecovelez5133
    @bryampachecovelez5133 4 роки тому +2

    When is part 2 coming up?

  • @snewstead1388
    @snewstead1388 4 роки тому

    Outstanding job. Clean install so far

  • @jeremyf7417
    @jeremyf7417 4 роки тому

    Great install!! Looks great

  • @mrexile09
    @mrexile09 4 роки тому

    Man you make it look easy

  • @maguelpolson1390
    @maguelpolson1390 4 роки тому

    Future goal right here 🙏😍

  • @Tonyromeo1970
    @Tonyromeo1970 4 роки тому +2

    Where can we get that rear bumper? That's awesome.

    • @tackcoma5280
      @tackcoma5280 4 роки тому +3

      Think that is a Varis bumper.

  • @cv63vet98
    @cv63vet98 4 роки тому +2

    Wish you can help me with the installation

  • @Hector21025
    @Hector21025 4 роки тому +1

    So I’m interested in those green coil overs @subispeed

  • @geza96
    @geza96 4 роки тому +1

    Nice work, just wish all these products where available in Australia.

    • @minzhang8036
      @minzhang8036 4 роки тому

      geza96 usdm parts are a bit different from jdm's, some might not be perfectly compatible

  • @ryanbaker7419
    @ryanbaker7419 3 роки тому

    Where can I find replacement U clamps? I am unsure of the size of them. One of mine popped out causing leader line to break which caused a leak. I have a new leader line but want to make sure it is clamped down for clearance.

  • @kevinssti694
    @kevinssti694 4 роки тому

    definitely getting

  • @markologan2418
    @markologan2418 2 роки тому

    Whats the ideal height settings for the normal ,high and low height for WRx 2018 sti

  • @paulmarsdensr8199
    @paulmarsdensr8199 4 роки тому

    Great video.

  • @markologan2418
    @markologan2418 2 роки тому

    what is a good coil over for a wrx sti on a mtr body kit ?

  • @Honda31060
    @Honda31060 4 роки тому +1

    What do you guys do with the old struts?

    • @minzhang8036
      @minzhang8036 4 роки тому

      Alejandro Gonzalez most likely sell them online as used parts

  • @marcosbarraza4738
    @marcosbarraza4738 4 роки тому

    How wide are those front rotors

  • @iambreakz777
    @iambreakz777 4 роки тому

    Where can I get those taillights I didn’t see them on the site ?

    • @SubiSpeed
      @SubiSpeed  4 роки тому +1

      www.subispeed.com/2015-subaru-wrx/lighting/tail-lights/olm-spec-cr-tail-lights-2015-wrx-sti

  • @marsvirtudazo
    @marsvirtudazo 4 роки тому

    Amazing tutorial car looks 🔥 stay safe out there...

  • @jeeyahnbrah3510
    @jeeyahnbrah3510 4 роки тому

    ganggang, you guys got olm oversized hoodscoop in stock?

  • @knurri
    @knurri 4 роки тому +1

    "unloosen the nut"?

  • @terencemostoles4049
    @terencemostoles4049 4 роки тому

    Anyone know whats the size for that leader line?

  • @angrywargamer8836
    @angrywargamer8836 10 місяців тому

    I live in the rust belt , this setup would only last a couple of years.

  • @minzhang8036
    @minzhang8036 4 роки тому

    Wow but it's something not affordable to me at the moment, no matter price or time supposed to consume

  • @jayhoward7448
    @jayhoward7448 4 роки тому

    What body kit is on that STI 🙄🙄.

  • @bryanrojas2317
    @bryanrojas2317 3 роки тому

    Smh you skip too many detailed points on how to wire the lines