That engine is what is called aProof of Concept built in a Lab of a engine company around the early 1900s. Companies like Fairbanks-Morse had Labratoryies which they had to build Proof of Concept to make sure they would work and test prior to going into building a Proto-type engine. My Dad used to work in a Crane company which was started in the late 1800s and they had a lot of stuff like that!
Nah, this is some guy's project that he made at home. This is NOT a proof of concept piece, made by a commercial company, to do testing on. It's WAY too weak and cobbled together with weird parts to be anything made by a legitimate company.
So what you have is a four piston, four valve, single combustion chamber high expansion ratio model engine. Someone was exploring thermo dynamics trying to extract more energy from the fuel by increased expansion ratio. As others have said a proof of concept model, it deserves to be in a museum. The construction hours in that model shows the dedication the builder had, the construction techniques are brilliantly simple. You don't need big frame bolts holding the cylinders and heads down when all the forces are balanced by the other pistons, it's the crankshaft that holds it all together, brilliant.
the crankshaft in my machinist/engineering opinion is not beeffy enough to withstand a lot of stress. after editing the video that was what I narrowed down to the weak link in the structure of the engine. despite looking big in the video because how close I filmed the journals are only about 5/16 thick . with no bearing braces from the upper throw and the lower throws it almost has to be flexing as it runs. that and the home made chain. I had to readjust the tensioners twice top film what little running I did .
It would be nice to make a close tolarance and stronger engine with the same bore and stroke and cooling. Just to see how much power & tourque it can make on a given amount of fuel. IT'S JUST BRILLIANT. It does need to in a musieam and taken care of thanks for the video👍
It's likely so old that movies with sound would have been relatively new. So it would have been much more profound than that. An entire short film made about the engine he built.
@@theodorgiosan2570 Not likely that old, looks more like 1940s to 50s tech but pretty impressive in that almost everything is hand made right down to the chain.
This Engine was a young boys' high school Shop project to demonstrate the youths knowledge before graduating high school Mechanical and Mechchine Shop course. For this Engine to still be around today, this young person had to take first place ribbon. Those that did not win would just scrap thier projects.😊 Thanks for sharing this piece of history with me.😊
What a lovely engine! I'd be tempted to clean it thoroughly, then do a planned video of it running. Afterwards I'd stick it in a plexiglass box on display. It would not last very long as a runner, but is truly worth preserving in it's as-built form for all to see.😍
My friends and I are way to hands on to lock it in a box. The weathering on it shows it's age well and I bet it wasn't spotless when the guy made it. So this is how it will stay
A really impressive build. Makes me wish I knew who built it and that I could meet and talk with him. The time he must have spent doing this is incredible. The chain simply whigs me out. I've built engines before and I never even THOUGHT of making my own chain!
Fascinating ! Possibly a proof of concept prototype. All the appearance of being a century old . Maybe the brain child of an early auto or air craft designer . What a Gem !
hobby engine.... a prototype would not have hand made chains and gears it would be all off the shelf stuff, faster better cheaper... and really the only explanation for it not to be that way is it being a hobby engine.
Thanks for showing this to us! Im a machinist / builder and am in the middle of fabricating a 2 cylinder TF engine. Perhaps a bit more agressuve then this example but still this is soooo neato! Thank you so much, for letting me see another machinists ideas and approach..
This type of vertical opposed pistons engine was the trademark from a French car manufacturer named Gobron-Brillié. They produced big luxury cars with 2, 4 and 6 cylinders with opposed pistons from 1885 to 1922. Their biggest 6 cylinder had a displacement of 976ci ! Most of these engines had side-vales but in 1921 a sleeve valve version was offered. They were the first in 1904 to hit 100mph (103,55mph) setting thereby a new land speed record.
Could you believe there is one in Argentina? It's a 1911 50hp model which belonged to the founders of the town of Intendente Alvear. It was restored in 2011 by the town government and a group of enthusiasts. Unfortunately most of the body was gone so they had to fabricate a new one.
@@douro20 I know of that car, it's a dark blue 40/60HP open tourer. There's a good reason he chose that car, it was designed to run on anything flammable (it could run on Alcool) making it a good pick if petrol was harder to come by than booze. The Tsar had a number of Dellaunay-Belleville that were know for their reliability, you can see that as buying an exotic sports car to differentiate yourself from your neighbor.
You are a really cool guy. Getting this stuff going is a fantastic hobby requiring great mechanical understanding AND appreciation for what it is. Too bad I can only give you 1 thumbs up.
@@cruddycornstalks oh I get it, it’s plenty of work and it’s appreciated. Hint hint, old bikes are a blast because you can ride them after doing the work lol. Thanks brother✌️
Great work has been done by the builder of that machine! My deep respect to who ever made it! Fantastic to see it running. Many greetings from Germany!
That is an amazing and fairly unique way of building an opposed piston engine. Ive seen plenty of double and triple crankshaft as well as single crank rocker style, but this is almost like a steam engine or early coalgas/natural gas engine with that extra crosshead throw. I'm definitely filing this one away for if I can ever have tinkering time. Edit: Very similar to a Junkers-Doxford style engine. Incredible tech.
Absolutely fantastic engine, absolutely fantastic video. Please keep up this great work. Thank you so much for sharing, the engineering world is blessed with what your doing here.
I didn't realise the video was from you Mister Cruddy. I was truely facinated with this a home made little engine. You are right why would even bother to make chain and gears. Must of been fellow who made this. Very cool.
Wow, hand built every piece! Great skill, patience and perseverance. If I'd had a hand made project like that, I would have made am attempt to locate the person who made it-- if he still living. This is simply to SHAKE HIS HAND 👍
Impressive understanding of the Otto cycle , at first glance I thought it was a two stroke opposed piston engine like the Commer TS3 Truck engine , but this is a four-stroke ! Commer TS3 Truck Design was around for decades , I worked on a farm when I was an apprentice and one day the farmer said " bet that you have never seen a 3 cylinder engine with 6 pistons , one crank shaft that drives rockers with 6 pistons , and the pistons meet at top dead centre , and it's a two stroke , and it's got ports with no valves ! I thought they were having a go at me ! But please look up the Commer TS3 engine ! Legend the opposed piston engine !
What an amazing find! You get all the good stuff LOL! I can only imagine the amount of time which went in to the construction of that engine. Blown away at the hand-made chain links and sprockets. Your piston ring o-ring modification worked well. I am sure you feel it's an honor to have this one-off piece in your collection. It makes me wonder what concept the builder was exploring. It looks like it might be possible to achieve perfect primary and secondary balance with that design, for one thing.
I didnt see opposed piston engine. It looked like a inline twin with normal layout except pushrod / valve train looked different. Small bore long stroke. O rings wont last long. Drill tiny holes on top of piston that channel to ring center with pin as to stay in one spot ( 90 degrees to rod. The combustion pressure should then bleed to center of ring helping expand it against cylinder. Run good synthetic oil or 100 :1 premix ....it will lube piston/ cylinder and help seal it.
It's very much is an opposed piston engine. 2 cylinders four pistons, there's two piston on top coming down into two pistons on the bottom with a common combustion chamber . The o rings would outlive the engine if ran much as it's not built to be ran very much. And neoprene o rings can handle the heat and pressure. Aswell as they seal.on the poorly machine bores of the engine.
Would love to see how combustion chamber is configured with one spark plug for 2 cylinders. Do both cylinders compress into 1 combustion chamber. At any rate a great collectors item to study and enjoy.
@@cruddycornstalks So there are 2 intake valves, 2 exhaust valves , 2 cylinders , 4 pistons all into one combustion camber? I say it ranks up there with one of the most unusual internal combustion engines ever built.
There is enough hardware to run an even-firing 2 cylinder engine. It only needs another spark plug and a distributor. The nice thing about this engine is good primary balance due to the opposing pistons.
This is the first opposed piston spark ignition engine I've seen! All others have been 2 stroke diesels, which lend themselves to the opposed piston layout, the Napier Deltic the most complex, a 3 crank, 18 cylinder, 36 piston design.
Those 2 cylinders have the parts from a motorcycle fork inside.... Those are Pistons & shim stacks from a front fork assembly it looks like... Looks like the cylinders are the outer fork legs.
Thats so cool someone definitely was in school when they made that. Or it was a concept for a bike mower or something. 2:55 it looks like an old battery tray.
The FACT THAT IT EVEN RUNS AT ALL IS AMAZING IN IT'S SELF! and to run well at that!! Highschool project or factory experiment? Who REALLY KNOWS,, BUT IMAGINE IF IT HAD SOME KIND OF COOLING SYSTEM IT MIGHT RUN A LONG TIME.....
That’s an amazing find! Should be a lesson that you don’t need all the tech of a modern engine to get something to work. Work efficiently and be clean… another story of course. Totally cool man!
Off setting the crankshaft to the compression side of the cyl8nder is a common way to almost completely remove oval wear pattern on the piston and cylinder. Additionally important to high compression motors.
Looks like a student project from the 50s or 60s.. trade school project.. interesting though barrel fins weren't incorporated to disipate heat.. proof of concept it runs under its own power..👍
I guess the opposed piston layout makes it perfectly balanced & reduces the load on the crankcase so it only needs sheet metal construction. Just a single spark plug though - huh?
In all the smart decisions the guy made making this engine. He made both cylinders use the same combustion Chambers with separate valves. And then naturally the cylinders fire together aswell instead of alternating making it the lease efficient way to make the engine timing.
That's what I thought, all of the driving forces taken by the 3 opposing rods within the cylinders so minimal crank case load. Interesting to note at this time that there were a number of 2 stroke air cooled motorbike engines that had 2 cylinders with only 1 spark plug working through a shared combustion chamber and they workd just fine, there are still people restoring and riding them. Perhaps that configuration was all the rage around this time, maybe ignition setups and plugs were expensive, hence this design attempt?
Did you realize that it was set up as a pull rope starter? The style of the flywheel and the starter rand the horizontal carburetor reminds me of prewar outboard motors. I wonder if this was intended originally for marine use?
I did but they also had the ratchet for either a crank or drill start. The rope pilly was so shart it would cut through a rope really easy. Aswell as I forgot to mention in the video. The flywheel is made of lead so I didn't want to rust damaging it.
The maker must have had arms and shoulders like a body builder after hours and hours of pull starts on a rope. You cheated with a power drill, and it still took a half-hour of spinning and setting.
That may be true, however, fwiw, I can say from experience that if you set the position of the flywheel correctly and your points are set correctly, a quick snap through 3/4 of a revolution will start a motor. Skill, not strength.@@terrywarner8657
what i would love to have seen is an explosion view of all the components neatly ordered. And perhaps a few detail shots of the more complex parts. Just to learn what makes this "clock" tick.
It's not an opposed pistoon engines but seems to be based on Doxford and similar ship engines which have a vertical link to upper pistons. Look up Doxfords.
Appears to me it was constructed from a collection of brass plumbing fittings. Perhaps it was built by a Plumber? The pistons appear to be old shower and sink valve stems? or of a similar design?
Bro you were holding an absolute piece of history that thing belongs in a museum somebody put thousands of hours into that I bet I really want to know where it came from and who made it now have you gotten any more information on where it came from?
Impressive engineering behind this. The fact it was homemade is even more impressive. Though ehat I'm wondering is what the original builder used it for, it has a lot of different possible uses
The O-rings won't like combustion. Stretch the worn-out rings (expand the gap). I wouldn't worry about heat treating them, because it won't run enough to cause much wear. Maybe just to soften them (before stretching them), so they wear to fit more quickly. I wonder if expanding snap rings come in the right size to be piston rings, they're close to the proper material & hardness.
Neoprene o rings are rated for high temp and high pressure aswell as beig low friction. Model builders use them all the time as they seal a lot better and easier then normal rings . You would need to heat treat the rings otherwise they won't ever seal better as they deform from us and won't work properly. They need to be able to spring open against the cylinder wall. The rings in there current state would deform my hand without any efforts and felt like bailing wire.
@@cruddycornstalks no (factory produced) engines use o-rings for piston rings for a reason, but I guess that engine can't run long enough to cause severe wear issues. It does sound like the OE rings are very soft already, and probly can't be hardened. The expanding snap ring idea is sounding better!
@@Iowa599 the o rings are a better choice on an engine like this. We aren't dealing with a high use "factory produced" engine. It's a model. The cylinders are not machined very well and the o ring will help seal against that. And it's a lot less friction so the engine will run smoother. Aswell as o rings are dirt cheap and the day they wear out it cost a couple bucks or less to replace 4 of them. But as I have seen in other projects I've worked on. Neoprene o rings will last decades In some models or even fullsize hit and miss engines do to how little they run and how cool they run. Have some engines in my family that have one in them longer then I've been alive.
Very impressive craftsmanship, too bad there isn't a cooling system, it might have a use somewhere. Usually opposed piston engines are 2-stroke Diesels, so this is even more special, maybe you can finish what the builder started 🙂
The deltec locomotive use one of the big opposed piston engines....an some model's even had 2 of the engines in them at the time they where the most powerful loco's in the world....
Back in the 30s and 40s there was no TV and other modern distractions. These projects were very common. There are a ton of homemade tractors and other stuff like that. Figure supper is over by 6:00pm. What's a guy to do for 4 or 5 hours every night? It is very likely that chain is not exactly homemade in that sense. It is highly likely he built a jig.
Picture this. When this was built there was no youtube, no internet, no social media. Whoever built this never would've imagined that one day some strangers all over the planet could admire his creation through a small window we call smart phones. Amazing world we live in today for sure
We lived without Internet for two years back in 2013/14 and in that time I made two motorized bicycles and the one drove me around a few hundred miles.
Should have put o-rings behind the piston rings to make em seal. The o-rings behind the piston rings would hold the piston rings to the cylinder walls and would keep the o-rings from melting due to combustion temperature
Very cool. Perhaps you could show how the engine is Opposing piston. I did not see how mechanically the pistons were opposed. My understanding is that you have one combustion cylinder with opposing piston tops facing each other. The combustion happens once while opposing pistons are at tdc. Very cool though Subbed. How did you get your hands on that. Jay Leno would offer you a hundred K for that.
Just two main bearings supporting three big ends is not a strong design. Two cranks would not have been any heavier as that would lose the central link rod and crossbar. It also loses the valves and doubles the power strokes.
That engine is what is called aProof of Concept built in a Lab of a engine company around the early 1900s. Companies like Fairbanks-Morse had Labratoryies which they had to build Proof of Concept to make sure they would work and test prior to going into building a Proto-type engine. My Dad used to work in a Crane company which was started in the late 1800s and they had a lot of stuff like that!
A lot went into that engine.
It’s good to know someone got paid to build this engine, it has a tremendous amount of work involved in it. Amazing just amazing!
Yes that is exactly what it is alright... unless it's not and it's just a engine some guy made at home. Good possible guess though.
Nah, this is some guy's project that he made at home.
This is NOT a proof of concept piece, made by a commercial company, to do testing on.
It's WAY too weak and cobbled together with weird parts to be anything made by a legitimate company.
So what you have is a four piston, four valve, single combustion chamber high expansion ratio model engine. Someone was exploring thermo dynamics trying to extract more energy from the fuel by increased expansion ratio. As others have said a proof of concept model, it deserves to be in a museum. The construction hours in that model shows the dedication the builder had, the construction techniques are brilliantly simple. You don't need big frame bolts holding the cylinders and heads down when all the forces are balanced by the other pistons, it's the crankshaft that holds it all together, brilliant.
the crankshaft in my machinist/engineering opinion is not beeffy enough to withstand a lot of stress. after editing the video that was what I narrowed down to the weak link in the structure of the engine. despite looking big in the video because how close I filmed the journals are only about 5/16 thick . with no bearing braces from the upper throw and the lower throws it almost has to be flexing as it runs. that and the home made chain. I had to readjust the tensioners twice top film what little running I did .
It would be nice to make a close tolarance and stronger engine with the same bore and stroke and cooling. Just to see how much power & tourque it can make on a given amount of fuel. IT'S JUST BRILLIANT. It does need to in a musieam and taken care of thanks for the video👍
@@peterupsall8542 it could definitely use a water jacket.
Close. It doesn’t have valves. It has vanes like a 2 stroke Detroit.
Oil drip pan is the base….
Some dude never thought that his home built engine from his HS Science Fair project would ever be in a tear down and run video! 😊
I have made things in my life i bet someone will find cool in 80 years to!
It's likely so old that movies with sound would have been relatively new. So it would have been much more profound than that. An entire
short film made about the engine he built.
@@theodorgiosan2570 Not likely that old, looks more like 1940s to 50s tech but pretty impressive in that almost everything is hand made right down to the chain.
@@cruddycornstalksprobably your future grand children
That's one hell of a science project!
This Engine was a young boys' high school Shop project to demonstrate the youths knowledge before graduating high school Mechanical and Mechchine Shop course. For this Engine to still be around today, this young person had to take first place ribbon. Those that did not win would just scrap thier projects.😊 Thanks for sharing this piece of history with me.😊
I was thinking that this was some kind of apprentice project too. The amount of time, thought and engineering work put into it is amazing.
What a lovely engine! I'd be tempted to clean it thoroughly, then do a planned video of it running. Afterwards I'd stick it in a plexiglass box on display. It would not last very long as a runner, but is truly worth preserving in it's as-built form for all to see.😍
My friends and I are way to hands on to lock it in a box. The weathering on it shows it's age well and I bet it wasn't spotless when the guy made it. So this is how it will stay
A really impressive build. Makes me wish I knew who built it and that I could meet and talk with him. The time he must have spent doing this is incredible. The chain simply whigs me out. I've built engines before and I never even THOUGHT of making my own chain!
I'd love for someone to show up and say they know where it is from. Be cool to hear the story
The guy who made that is most likely dead already by this point.
This must be the best "Abandoned for 80 years. Will it run?" project video on youtube so far :))
Fascinating ! Possibly a proof of concept prototype. All the appearance of being a century old . Maybe the brain child of an early auto or air craft designer . What a Gem !
it is truly a unique piece
hobby engine.... a prototype would not have hand made chains and gears it would be all off the shelf stuff, faster better cheaper... and really the only explanation for it not to be that way is it being a hobby engine.
Thanks for showing this to us! Im a machinist / builder and am in the middle of fabricating a 2 cylinder TF engine. Perhaps a bit more agressuve then this example but still this is soooo neato! Thank you so much, for letting me see another machinists ideas and approach..
It be a fun project to make an improved version of this with more understanding of how engines need to be designed.
the guy who built this was very skilled and clever. hats down.
I've worked on engines all my life and that thing is amazingly built and I understand it
You have something
Beautiful little model engine. A very dedicated person put many hours into building this jewel. Great find!
That's a work of art.
yes it is!
This type of vertical opposed pistons engine was the trademark from a French car manufacturer named Gobron-Brillié. They produced big luxury cars with 2, 4 and 6 cylinders with opposed pistons from 1885 to 1922. Their biggest 6 cylinder had a displacement of 976ci ! Most of these engines had side-vales but in 1921 a sleeve valve version was offered.
They were the first in 1904 to hit 100mph (103,55mph) setting thereby a new land speed record.
Could you believe there is one in Argentina? It's a 1911 50hp model which belonged to the founders of the town of Intendente Alvear. It was restored in 2011 by the town government and a group of enthusiasts. Unfortunately most of the body was gone so they had to fabricate a new one.
@@douro20 I know of that car, it's a dark blue 40/60HP open tourer. There's a good reason he chose that car, it was designed to run on anything flammable (it could run on Alcool) making it a good pick if petrol was harder to come by than booze.
The Tsar had a number of Dellaunay-Belleville that were know for their reliability,
you can see that as buying an exotic sports car to differentiate yourself from your neighbor.
Jeez!! The rod big ends have a TON of play on the crank journals... 😲
You are a really cool guy. Getting this stuff going is a fantastic hobby requiring great mechanical understanding AND appreciation for what it is. Too bad I can only give you 1 thumbs up.
Some find, glad you took the time to show us. Very nifty. Thanks a lot.
no problem. neat piece that deserve to be seen by others.
@@cruddycornstalkshopefully you can dig some more vintage motors up for us
@@deborahchesser7375 I try to make a video every other week. Just doesn't always happen
@@cruddycornstalks oh I get it, it’s plenty of work and it’s appreciated. Hint hint, old bikes are a blast because you can ride them after doing the work lol. Thanks brother✌️
Great work has been done by the builder of that machine! My deep respect to who ever made it! Fantastic to see it running. Many greetings from Germany!
Absolutely amazing project!
Im glad it ended up in good hands to show it's glory!
Thank you. Try my best to take care of things!
BRILLIANT DESIGN!!! I LOVE how the top 2 pistons are connected to the crank shaft!!! 🤯❤️🎉
That is an amazing and fairly unique way of building an opposed piston engine. Ive seen plenty of double and triple crankshaft as well as single crank rocker style, but this is almost like a steam engine or early coalgas/natural gas engine with that extra crosshead throw.
I'm definitely filing this one away for if I can ever have tinkering time.
Edit: Very similar to a Junkers-Doxford style engine. Incredible tech.
Yes. Very unusual for sure!
Absolutely fantastic engine, absolutely fantastic video. Please keep up this great work. Thank you so much for sharing, the engineering world is blessed with what your doing here.
Absolutely beautiful piece of work.
Thank you.
...wow! I LOVE home made stuff like this. So awesome!!
I didn't realise the video was from you Mister Cruddy. I was truely facinated with this a home made little engine. You are right why would even bother to make chain and gears. Must of been fellow who made this. Very cool.
good video!!! Thank you for showing us this and yes the craftsmanship is amazing.
Thanks you
I'm a sucker for cobbler engines. Thanks for the content!
Wow, hand built every piece! Great skill, patience and perseverance. If I'd had a hand made project like that, I would have made am attempt to locate the person who made it-- if he still living. This is simply to SHAKE HIS HAND 👍
Impressive understanding of the Otto cycle , at first glance I thought it was a two stroke opposed piston engine like the Commer TS3 Truck engine , but this is a four-stroke ! Commer TS3 Truck Design was around for decades , I worked on a farm when I was an apprentice and one day the farmer said " bet that you have never seen a 3 cylinder engine with 6 pistons , one crank shaft that drives rockers with 6 pistons , and the pistons meet at top dead centre , and it's a two stroke , and it's got ports with no valves ! I thought they were having a go at me ! But please look up the Commer TS3 engine ! Legend the opposed piston engine !
Those Commers sounded like they were turning 9000+ RPM's when they were really only going about 2500.... 😂
That thing is amazing. So are you for bringing it back to life.
What an amazing find! You get all the good stuff LOL! I can only imagine the amount of time which went in to the construction of that engine. Blown away at the hand-made chain links and sprockets. Your piston ring o-ring modification worked well. I am sure you feel it's an honor to have this one-off piece in your collection. It makes me wonder what concept the builder was exploring. It looks like it might be possible to achieve perfect primary and secondary balance with that design, for one thing.
Very Impressive! Nice going on getting the homemade engine running.
Wow. Very nice beautiful engine
thank you!
That's a cool design! I've seen Opposed piston engines before but the elimination of a second crankshaft is very neat.
Man that is neat, some people have magic hands.
I didnt see opposed piston engine. It looked like a inline twin with normal layout except pushrod / valve train looked different. Small bore long stroke. O rings wont last long. Drill tiny holes on top of piston that channel to ring center with pin as to stay in one spot ( 90 degrees to rod. The combustion pressure should then bleed to center of ring helping expand it against cylinder. Run good synthetic oil or 100 :1 premix ....it will lube piston/ cylinder and help seal it.
It's very much is an opposed piston engine. 2 cylinders four pistons, there's two piston on top coming down into two pistons on the bottom with a common combustion chamber . The o rings would outlive the engine if ran much as it's not built to be ran very much. And neoprene o rings can handle the heat and pressure. Aswell as they seal.on the poorly machine bores of the engine.
Another excellent video and unique engine. I’m happy I found you and can’t wait for the next presentation. Thanks!
Your absolutely right. This is impressive as hell. Sombody had time, and used it diligently!
Intriguing. I've always thought the hit or miss engines could be an answer for many applications.
The guy who made this was a genius
He truly was
Are there any Markings on it?
Thing belongs in a Museum, really a Awesome little engine for sure 👍🏻
Not a single mark anywhere no numbers nothing. a true mystery
The person who made this was a genius.
That's a really cool piece right there!
Beautiful little machine
That is very cool! I have been interested in the opposed piston design of Achates Power.
That thing is dukin awesome man,i love the chains.
It definitely is something special
This is incredible. I am just amazed by it.
Would love to see how combustion chamber is configured with one spark plug for 2 cylinders. Do both cylinders compress into 1 combustion chamber. At any rate a great collectors item to study and enjoy.
You are correct. The guy just drilled a common hole between the two cylinders and that's where the sparkplug is.
@@cruddycornstalks So there are 2 intake valves, 2 exhaust valves , 2 cylinders , 4 pistons all into one combustion camber? I say it ranks up there with one of the most unusual internal combustion engines ever built.
@@oldamericaniron5767 yes correct. It very much is.
There is enough hardware to run an even-firing 2 cylinder engine. It only needs another spark plug and a distributor. The nice thing about this engine is good primary balance due to the opposing pistons.
This is the first opposed piston spark ignition engine I've seen! All others have been 2 stroke diesels, which lend themselves to the opposed piston layout, the Napier Deltic the most complex, a 3 crank, 18 cylinder, 36 piston design.
Very few brands used it as it didn't really give enough benefit for being gas powered
Those 2 cylinders have the parts from a motorcycle fork inside.... Those are Pistons & shim stacks from a front fork assembly it looks like... Looks like the cylinders are the outer fork legs.
That's pretty amazing to be hand built. That should be in museum
Dont you just love those 40 mile long nits & bolts. You just turn & turn & turn. AND IT NEVER SEEMS TO END!🤣🤣🤣🤣🤣
This is absolutely amazing craftsmanship
Thats so cool someone definitely was in school when they made that. Or it was a concept for a bike mower or something. 2:55 it looks like an old battery tray.
Very cool engine! And it really runs. good video.
Absolutely amazing craftsmanship 👍
The FACT THAT IT EVEN RUNS AT ALL IS AMAZING IN IT'S SELF! and to run well at that!! Highschool project or factory experiment? Who REALLY KNOWS,, BUT IMAGINE IF IT HAD SOME KIND OF COOLING SYSTEM IT MIGHT RUN A LONG TIME.....
That’s an amazing find! Should be a lesson that you don’t need all the tech of a modern engine to get something to work.
Work efficiently and be clean… another story of course.
Totally cool man!
Off setting the crankshaft to the compression side of the cyl8nder is a common way to almost completely remove oval wear pattern on the piston and cylinder.
Additionally important to high compression motors.
Man that’s amazing and it runs smooth too
Nice find. It's awesome
Thank you
Excellent Video and Audio. Nice.
Did you say nothing special ? No youtube, no cnc, just books and friends, hand tools... Its amazing! Handmade carburettor? Its absolutely fantastic!
Looks like a student project from the 50s or 60s.. trade school project.. interesting though barrel fins weren't incorporated to disipate heat.. proof of concept it runs under its own power..👍
I guess the opposed piston layout makes it perfectly balanced & reduces the load on the crankcase so it only needs sheet metal construction. Just a single spark plug though - huh?
In all the smart decisions the guy made making this engine. He made both cylinders use the same combustion Chambers with separate valves. And then naturally the cylinders fire together aswell instead of alternating making it the lease efficient way to make the engine timing.
That's what I thought, all of the driving forces taken by the 3 opposing rods within the cylinders so minimal crank case load. Interesting to note at this time that there were a number of 2 stroke air cooled motorbike engines that had 2 cylinders with only 1 spark plug working through a shared combustion chamber and they workd just fine, there are still people restoring and riding them. Perhaps that configuration was all the rage around this time, maybe ignition setups and plugs were expensive, hence this design attempt?
Can I close my mouth now..... unbelievable...simply awesome.....
WOW!!!!!!! I AM FASCINATED BY "OPPOSED PISTION ENGINES, [ESPECIALLY IF THEY ARE DIESELS!!!] THANKS FOR SHARING!!!!
Did you realize that it was set up as a pull rope starter? The style of the flywheel and the starter rand the horizontal carburetor reminds me of prewar outboard motors. I wonder if this was intended originally for marine use?
I did but they also had the ratchet for either a crank or drill start. The rope pilly was so shart it would cut through a rope really easy. Aswell as I forgot to mention in the video. The flywheel is made of lead so I didn't want to rust damaging it.
The maker must have had arms and shoulders like a body builder after hours and hours of pull starts on a rope. You cheated with a power drill, and it still took a half-hour of spinning and setting.
That may be true, however, fwiw, I can say from experience that if you set the position of the flywheel correctly and your points are set correctly, a quick snap through 3/4 of a revolution will start a motor. Skill, not strength.@@terrywarner8657
How coool is that machine! Wow.
what i would love to have seen is an explosion view of all the components neatly ordered.
And perhaps a few detail shots of the more complex parts.
Just to learn what makes this "clock" tick.
It's not an opposed pistoon engines but seems to be based on Doxford and similar ship engines which have a vertical link to upper pistons.
Look up Doxfords.
Well considering a doxford is called an opposed piston engine it would seem it is an opposed piston engine.
Great video 👍👍👍
Awesome how it runs so smoothly since a lot of the vibration is cancelled out
That was amazing little engine.
it has the cool factor for sure!
This is impressive. Glad it worked out. That’s life without cellphones and computers.
Appears to me it was constructed from a collection of brass plumbing fittings.
Perhaps it was built by a Plumber? The pistons appear to be old shower and sink valve stems? or of a similar design?
Bro you were holding an absolute piece of history that thing belongs in a museum somebody put thousands of hours into that I bet I really want to know where it came from and who made it now have you gotten any more information on where it came from?
I have not. no one has come up with anything nor have we found anyone.
Just cool as hell thanks for sharing
Spectacular lil engine....even the chain is amazing...great find
thank you!
Impressive engineering behind this. The fact it was homemade is even more impressive. Though ehat I'm wondering is what the original builder used it for, it has a lot of different possible uses
with the lack of cooling it was merely a concept engine or perhaps just something to pass the time and make.
@@cruddycornstalks I'm sure it was worth it in the end. If it had a cooling system I can see it powering a go-kart :)
I'd like to see the home made rings just to see what they look like okay thanks Charles
Perfectly scaled down version of a normal piston ring.
epic engine!! endless hours of craftinbg this marvel
Just amazing!!!thnx for this dude...just love it😊
I Wonder if you put a big fan blade on the flywheel if it would push enough air around it to keep it cool and allow it to run longer
without cooling fins most likely not!
That is such an awesome engine
The O-rings won't like combustion. Stretch the worn-out rings (expand the gap). I wouldn't worry about heat treating them, because it won't run enough to cause much wear. Maybe just to soften them (before stretching them), so they wear to fit more quickly.
I wonder if expanding snap rings come in the right size to be piston rings, they're close to the proper material & hardness.
Neoprene o rings are rated for high temp and high pressure aswell as beig low friction. Model builders use them all the time as they seal a lot better and easier then normal rings . You would need to heat treat the rings otherwise they won't ever seal better as they deform from us and won't work properly. They need to be able to spring open against the cylinder wall. The rings in there current state would deform my hand without any efforts and felt like bailing wire.
@@cruddycornstalks no (factory produced) engines use o-rings for piston rings for a reason, but I guess that engine can't run long enough to cause severe wear issues.
It does sound like the OE rings are very soft already, and probly can't be hardened. The expanding snap ring idea is sounding better!
@@Iowa599 the o rings are a better choice on an engine like this. We aren't dealing with a high use "factory produced" engine. It's a model. The cylinders are not machined very well and the o ring will help seal against that. And it's a lot less friction so the engine will run smoother. Aswell as o rings are dirt cheap and the day they wear out it cost a couple bucks or less to replace 4 of them. But as I have seen in other projects I've worked on. Neoprene o rings will last decades In some models or even fullsize hit and miss engines do to how little they run and how cool they run. Have some engines in my family that have one in them longer then I've been alive.
Well done 👍
I didn't read all the comments but I feel you should detail the engine and make prints.
Very impressive craftsmanship, too bad there isn't a cooling system, it might have a use somewhere. Usually opposed piston engines are 2-stroke Diesels, so this is even more special, maybe you can finish what the builder started 🙂
The deltec locomotive use one of the big opposed piston engines....an some model's even had 2 of the engines in them at the time they where the most powerful loco's in the world....
yes. there is alot of diesel opposed piston engines out there . Fairbanks made probably millions of them.
If only you could find out who the builder was and what were they trying to prove AND if it led to a commercial success! 👍
Back in the 30s and 40s there was no TV and other modern distractions. These projects were very common. There are a ton of homemade tractors and other stuff like that. Figure supper is over by 6:00pm. What's a guy to do for 4 or 5 hours every night?
It is very likely that chain is not exactly homemade in that sense. It is highly likely he built a jig.
Dang, I lost my storage shed 42 yrs ago all my tooling's and jigs that's my motor!!!!
your kidding right? if not i would love to know more!!
Looks to me like this is a single crankshaft, four piston opposing engine.
Picture this. When this was built there was no youtube, no internet, no social media. Whoever built this never would've imagined that one day some strangers all over the planet could admire his creation through a small window we call smart phones. Amazing world we live in today for sure
We lived without Internet for two years back in 2013/14 and in that time I made two motorized bicycles and the one drove me around a few hundred miles.
@@cruddycornstalks that's actually pretty cool! I build cars as a hobby, but still use the internet while doing it
I think it's beautiful
He should try putting the old rings back in and warming up the cylinders with a torch or something to see if it would help it run
Should have put o-rings behind the piston rings to make em seal. The o-rings behind the piston rings would hold the piston rings to the cylinder walls and would keep the o-rings from melting due to combustion temperature
@@OtisDavies-cv6ze they will take the heat just fine and all the piston ring would add is extra friction
Very cool. Perhaps you could show how the engine is
Opposing piston.
I did not see how mechanically the pistons were opposed.
My understanding is that you have one combustion cylinder with opposing piston tops facing each other. The combustion happens once while opposing pistons are at tdc.
Very cool though
Subbed.
How did you get your hands on that.
Jay Leno would offer you a hundred K for that.
I pulled the upper set of pistons out when I tore it down they pull down towards the "normal" set of pistons
Just two main bearings supporting three big ends is not a strong design. Two cranks would not have been any heavier as that would lose the central link rod and crossbar. It also loses the valves and doubles the power strokes.