How to Install a Creality Filament Detector on an Ender 3 V3 SE
Вставка
- Опубліковано 1 сер 2024
- In this video I show details on how I installed an end-of-filament detector on an Ender 3 V3 SE. According to their literature it should work with all Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 Plus. It should work with other Ender 3's as long as they have the 32 Bit V4.2.2/V4.2.7 Motherboard, although you might have to upgrade the firmware on other Ender 3 models. Check with your model's papers before you order an end-of-filament detector. I purchased the detector from Amazon for $15.
Hello Dean, I really appreciate your video, with it I was able to make the connection without any problem. Thank you very much for your support!❤
Thank you! This is the only video I can find installing it on this model that's actually correct and also easy to follow
Thanks for the video, it was the only one I found explaining how to do it correctly.
I have seen on other 3D Printers a filament detector and would like to add one to my printer. Thanks to your video and information, I’ll be able to do that.
Thank you very much, sir. Your video on installing the sensor has been really helpful. Thanks!
Great video, thanks, im installing tonight, you made it very thorough and anytime i had a question you answered it pretty much seconds after i thought the question to myself haha thanks again !
Thank you mister. I bought and install the detector as well
This is definitely the best video ✌️
Thank you
Thanks for this!
ah ok got it. its on the description
There's clips under the top plastic piece and one on the back to hold the wire for the sensor instead of it dangling all ugly like that
Thank you for the great video.
Question: When you reload the filament after the sensor trips and pauses the print, do you have to use the extrude command or does the machine automatically prime the nozzle?
Don’t know. I need more experience with it. Anyone else know?
Como SE pone en modo usb dfu la crealy 3 v3 se
Display tft35 e3 for creality 3 v3 se
I must have the older model of the v3 se. Mine doesn’t have a passage for hiding the wires on the top piece and no opening to feed the wire into and down the gantry without crushing it.
Yo tampoco, lo tienes que poner por fuera y apañarte con el cable colgando por la columna.
i installed this on my ender3v3 se and its not working, im assuming i have to upgrade the firmware, anyone know where i can find the correct firmware?
Comment in here if you find the answer, it also does not work for me and I'm not getting any help
thanks where did you buy your detector?
On Amaxon
Where on gods earth is that slot in the upper piece of the cable ???? No matter where I guided the cable there was a gap. Please please please show me where the slot is. So I can guide it through. Thank you 🙏
OH and another thing, I was unable to remove the fan wire or cable from the motherboard and it GLUED to the base and I just awkwardly had to move it to the right trying not to detach or rip of the fan cable from the motherboard. Is it normal for it to be glued ?
I have posted a public post on my community tab which I hope might help you find where the cable slot is. It took me awhile to figure it out where it was when I assembled mine. Creality tends to fasten the cables to the mother board with white hot-melt glue. You can usually remove this by grabbing with pliers. If you're careful it shouldn't hurt the cable connector or the slot it goes into.
Opps, forgot to mention the public post has a photo of my assembly.
Anyone managed to get this working with the Ender 3 V3 SE and the Sonic Pad? Installed it all today with the help of this video and nothing :( Doesn't seem to do anything.
I have never tried Sonic Pad. Sounds like it isn't compatible.
@@DeansNScaleTrains I was able to work it out. Just had to add some gcode into the printer.cfg file.
Marlin
I am unable to fit the top frame back I have to carve a small dent under the frame where the cable/wire comes to be able to fit the frame
Running the cable is a little trickie, but it does work. Your way is also a solution.
That’s the exact same problem I had, I don’t know if I should carve a piece out or if I should keep struggling trying to find the slot in the upper piece to guide the cable through
@@WatchingUA-cam123 there is an intersection of three or so plastic pieces coming from the three holes, I carved the plastic there
its false you cant plug that there the plug is 4 pin but your cable is 3 pin you must plug the cable to next to edge screw three pin slot ı do it now and its work with that
Can be 2 different version of the filament sensor ?
What a waste of time, you can´t see anything, but his hand.
He pulled it from the wrong side...
I was thinking that too but there is a small opening on the left and none on the right side, Logically, it should be right but heh lol.
@@proutos99This is true, I tried it the other side, theres no slot to put it through at the top
@@Bannanamamajama i didnt even find a slot heheh