Always hurts me man, 7.1k views on good Friday 2023, and only 333 subscribers. C'mon yall, this is a very good video and this man did this for us. Imagine if all of or even just half subscribed. This man deserves it and then some! God bless you and thank you! I thank God I came across your video. Happy Easter brother!!! Thank you again, for real. Ive got the same car. Lol
Terrific video! I’m doing the exact same thing to an ‘08 Chrysler Sebring with the same engine. This was very helpful and easy to follow. Much appreciated.
You're life saver! I first noticed a little oil but thought maybe it was just a spill. But then it came back after cleaning it. And then check engine light came on and code was p00013. Dodges are nice because you can cycle the key from off to run 3 times landing on run for the last one and it'll flash the codes. There's another way to get the whole instrument panel to light up but I don't know what that all means. Lol. But...the code came up p00013 and found out it stood for bank 1 camshaft 2 position actuator circuit open. I think it means oil got into the sensors so I've got to change them too. But I wanted to fix the root first so thank you, and sorry for my long comment. Just glad you made this video and saving me loads of money. I wouldn't have been able to afford it.
I need help! I have a 2013 Dodge Avenger 2 4 L . The engine light is on & it's misfiring on cylinder #2. That's also the only code I'm getting. P0302. I've changed the plugs & coils. Cleaned the injectors, checked for vacuum leaks. The ohms are good on the injectors. It's still misfiring. I don't want to replace the O2 or MAF sensor unless I know that's the issue. It's done this before & we did the same thing as above & it's done great for 30,000 miles. So I'm at a loss on what could be causing it this time. HELP! 😔
It may not be completely helpful info but I had p0302 misfire after I replaced the coil pack as well. I had my valve cover leak into my new coil pack I kept getting the code. Thier is a recall on the catalytic converter on this vehicle. So dodge might be able to warranty the 0-2 as well. Also map sensor is around $30 . That can throw a p0302 code as well.
Mines smoke a little so I can’t drive it it’s like a grey smoke the mechanic told me that I have a that I have a blown head gasket but it’s funny how the first time they didn’t tell me that so cou or days ago I paid 240 for something and pick up my car so basically I feel like they just telling me shit so ima get my car towed from the shop tomorrow i don’t want touching my car I have a 2014 dodge avenger se
@@coconutjo9780 it mostly been in the shop I can’t tell if it is or not but when I took it out the shop it’s doing the same thing it seems like then I go a certain distance it starts to smoke I honestly don’t think it’s over heating but when it start smoking the car slow down and automatically starts to start working
@@aaliahfuller1609 it could be a head gasket which I hope it isn’t or some leaking fluids that’s getting on parts of the exhaust system that when the car warms up it starts to burn off the fluids and starts to smoke. Its kinda hard to say really say.
It wasn’t overheating, it was leaking oil then that oil was burning on the exhaust. I have a few other videos on overheating issues with this particular engine but not with this car.
![Lp. Сердце Вселенной #1 НАЧАЛО ПУТЕШЕСТВИЯ [Новый сезон] • Майнкрафт](http://i.ytimg.com/vi/380Q7gLWGvk/mqdefault.jpg)
Always hurts me man, 7.1k views on good Friday 2023, and only 333 subscribers. C'mon yall, this is a very good video and this man did this for us. Imagine if all of or even just half subscribed. This man deserves it and then some! God bless you and thank you! I thank God I came across your video. Happy Easter brother!!! Thank you again, for real. Ive got the same car. Lol
Thanks for your comments!! You are the man!!! God bless!!
Terrific video! I’m doing the exact same thing to an ‘08 Chrysler Sebring with the same engine. This was very helpful and easy to follow. Much appreciated.
Thanks and good luck!!
Torque specs
Valve cover bolts
Step 1 44 in-lbs
Step 2. 90 in-lbs
Source?
You're life saver! I first noticed a little oil but thought maybe it was just a spill. But then it came back after cleaning it. And then check engine light came on and code was p00013. Dodges are nice because you can cycle the key from off to run 3 times landing on run for the last one and it'll flash the codes. There's another way to get the whole instrument panel to light up but I don't know what that all means. Lol. But...the code came up p00013 and found out it stood for bank 1 camshaft 2 position actuator circuit open. I think it means oil got into the sensors so I've got to change them too. But I wanted to fix the root first so thank you, and sorry for my long comment. Just glad you made this video and saving me loads of money. I wouldn't have been able to afford it.
No problem!! Good luck with your car! My son has a 2009 Orange Average still rolling!!
Thanks for sharing man. I haven't changed one in awhile. I appreciate the refresher course
You’re welcome! Thanks for the comment!
Thank you so much!!! You made it easy for me to do even without much car knowledge lol
You’re very welcome!!
Man! Thank you so much for the video . Out here saving lives and pockets Wheres the cape 🙂 salute
I’m glad I could help! Thanks for watching and good luck!!! Salute 🫡
Thank you for the video, Im doing the sam thing as soon as the sun comes up. One day ill have a garage. God Bless
So helpful and so relatable, like my best homie is showing me how of course i can do this 🤘mad luv
Thanks for the kind words and good luck!!
Dodge Avenger 2.4L Valve Cover Torque Specs : 8 ft-lbs
Thanks!
Dam tech n9ne I appreciate you! For your music and for helping me change my valve cover gasket on my Dodge Avenger :) but forea foreal tho thanks :)
If I had a dollar for everytime for being call tech n9ne LOL!!
Thank you! My problem solved!
You’re welcome! Glad it helped!!
Thanks Jo you rock honestly
Thanks! I appreciate it!! You ROCK!!
Most useful video 📹 👍!!!!!
Thanks for the Video!!
You’re welcome! Thanks for watching!!
I need help! I have a 2013 Dodge Avenger 2 4 L . The engine light is on & it's misfiring on cylinder #2. That's also the only code I'm getting. P0302. I've changed the plugs & coils. Cleaned the injectors, checked for vacuum leaks. The ohms are good on the injectors. It's still misfiring. I don't want to replace the O2 or MAF sensor unless I know that's the issue. It's done this before & we did the same thing as above & it's done great for 30,000 miles. So I'm at a loss on what could be causing it this time. HELP! 😔
It may not be completely helpful info but I had p0302 misfire after I replaced the coil pack as well. I had my valve cover leak into my new coil pack I kept getting the code. Thier is a recall on the catalytic converter on this vehicle. So dodge might be able to warranty the 0-2 as well. Also map sensor is around $30 . That can throw a p0302 code as well.
Thanks for your video good stuff
You’re welcome! Thanks for watching and good luck!!
Will be doing this on my next day off. How do I know how many pounds I'm tightening it to?
Thank you man
You’re very welcome!!
I need a video on how to replace the rear trailing arm on a 2010 dodge avenger
I wish I could do one but I don’t have access to on of these cars now.
I’m going through this exact problem right now
You got this!
Thank you for the video. It help my diagnose the oil leak problem. Did it fix the problem when you finished the gask replacement?
You’re welcome, Thanks for watching and yes it fix the problem.
I HAVE A 2012 DODGE AVENGER AND I HAVE OIL AROUND ONE OF MY SPARK PLUGS. I WONDER IF I NEED TO DO THE SAME ???
Yep 🎯🎯 Valve cover and the spark plug tunnel gaskets!
Is there a specific way to place the bolts when putting the new cover on? Some are short some are longer.
yes there's a diagram to follow when putting the bolts back
Torque specs
Step 1 44 in-lbs
Step 2. 90 in-lbs
Thanks!!
It’s so easy
Do I have to wait for the car to cool down
How much for this job if mechanic buys the part for $25
A shop will probably charge $200 for labor.
Mine came with a lot of little grommets are they necessary I really don't want to drop one into the motor
Grommets aren’t that necessary just be extra careful not to drop or get anything inside of the engine. Good luck!
@@coconutjo9780 thanx man
Mines smoke a little so I can’t drive it it’s like a grey smoke the mechanic told me that I have a that I have a blown head gasket but it’s funny how the first time they didn’t tell me that so cou or days ago I paid 240 for something and pick up my car so basically I feel like they just telling me shit so ima get my car towed from the shop tomorrow i don’t want touching my car I have a 2014 dodge avenger se
Is the smoke coming from underneath the hood or from the back out of the tailpipe?
@@coconutjo9780 I’m
Not 100% sure when I open the hood the grey smoke was mostly coming from the hood
@@aaliahfuller1609 has the cars engine temperature been normal or has it been getting higher than normal?
@@coconutjo9780 it mostly been in the shop I can’t tell if it is or not but when I took it out the shop it’s doing the same thing it seems like then I go a certain distance it starts to smoke I honestly don’t think it’s over heating but when it start smoking the car slow down and automatically starts to start working
@@aaliahfuller1609 it could be a head gasket which I hope it isn’t or some leaking fluids that’s getting on parts of the exhaust system that when the car warms up it starts to burn off the fluids and starts to smoke. Its kinda hard to say really say.
Was your car overheating and if so…. Did that fix your problem?
It wasn’t overheating, it was leaking oil then that oil was burning on the exhaust. I have a few other videos on overheating issues with this particular engine but not with this car.