Dude, I love your channel. Please keep the videos coming. I'm not a mini bike or go kart guy but I'm a big fan of you and just all the stuff you do. I love the white board and I bet you have spread sheets set up on your computer. Thank you
FYI you have to drill the piece where the throttle cable goes other wise it will not fit in with the metal throttle. Also I had problems with the filter fitting in so I put the screw that holds the booth of the throttle cable closer to the tank.
dam black u just keep surprising us with these top notch vids and we love the talks n info especially the masterlink part which in my case i cant connect my chain bcuz the gold reaper chain needs special master link smh love how the duro looks tho BLue Magic Frank Lucas style lol
Great video 👍. Thanks for sharing your knowledge, experience on all things Mini Bike 🚲. I watch a lot of Mini 🚲 videos , you always show how to do it the right way. I have learned a lot from your videos . Awesome 👍😎 As Usual. Keep It Going , Brother 👊✌️🛵😎🇺🇸
Another great video, I’m not clear on how the governor bypass works. Would you give a detailed video on the subject? Thanks for the video, ride safely.
Black66. If you pull the head are you able to let us know if it uses 27/25 valves? Another nice thing to know is if it uses a clone crankshaft. (rod journal and flywheel taper) Thanks.
Please make more vids with this motor/ minibike!! I just got one and it rips but only goes 32 sadly and I’m already wanting to do way more stuff with it😂
I have the same motor and I was wanting to know what is the plastic black box on the rear bottom of the motor for? It's connected to tank and carb. Im askjng cuzmine feel off some where.
I wish I could tell you what store it came from. I got it from my dad a while back. He had a go-kart shop back in the 1980s. I'll have to see if I can find out where he got it from.
To somebody who doesn't know all that much about Engines like myself lol you would think that going from 3.5 Horsepower to 7 Horsepower would make more than only a 5 mph increase in speed. But just goes to show it's not all about Horsepower when it comes to going fast. It's all in the gearing and performance parts. There are lower Horsepower Engines out there that will leave a higher Horsepower Engine in the dust if they're set up properly.
For sure! The engine is rated at 7h.p but it will only turn around 4k RPM the way its set up , it doesn't have much more top speed. Torque is a different story. The engine has a lot more torque than the 3.5 H.P so it gets up to a given speed a lot faster. I have more videos coming out with this engine. It gets a lot faster once it has more RPM potential...
Black 66 u truly are amazing I'm 14 and I do all my work on my bike and u taught me all of it and u responded back over night on an old vid much respect man keep up the great work
@@Black66 and since I have your attention do u think u could do a video on go power sports stage 4 head it's milled and ported and polished and I wanna get one cause the one on my bike is stripped and I would like to see what kinds performance gains I would get
Ya, its a vintage bike . I found this one on Craigslist. I have seen them on eBay . You can also buy simular new bikes at gokartsusa and go power sports and places like that.
@@Black66 Yeah, but GPS wants 900 bucks for their Rascal kit, PLUS the engine! I think that's too much. So I'll scrounge up used frames and parts. I know a guy, lol.
Bro i need help with my bike. I've been asking multiple times and no one replies or you..... Love your channel but need to talk to someone to complete my project COLEMAN bike
Dude, I love your channel. Please keep the videos coming. I'm not a mini bike or go kart guy but I'm a big fan of you and just all the stuff you do. I love the white board and I bet you have spread sheets set up on your computer. Thank you
Thanks for the kind words!
He better watch out nasa might hire him to build them a rocketship or something 🚀 💨💨💨to the moon Alice 🌙
@@Black66u da man mr black66 ⚫️ 🐈⬛️ ◼️ ⬛️ ♟️ ▪️ ⚫️ 🐈⬛️
I’m just starting my second mini bike project. Keep the great info coming!!!!!!!!!!!!!!
Nice video. Good pace in delivery. Good camera work. Thanks
FYI you have to drill the piece where the throttle cable goes other wise it will not fit in with the metal throttle. Also I had problems with the filter fitting in so I put the screw that holds the booth of the throttle cable closer to the tank.
dam black u just keep surprising us with these top notch vids and we love the talks n info especially the masterlink part which in my case i cant connect my chain bcuz the gold reaper chain needs special master link smh love how the duro looks tho BLue Magic Frank Lucas style lol
BADASS! Thank you for sharing!
Thanks! I have some more stuff with the Duromax on tbe channel .
Double the torque n half the time to 30mph is awesome worth the swap.
Great video 👍. Thanks for sharing your knowledge, experience on all things Mini Bike 🚲. I watch a lot of Mini 🚲 videos , you always show how to do it the right way. I have learned a lot from your videos . Awesome 👍😎 As Usual. Keep It Going , Brother 👊✌️🛵😎🇺🇸
Thank you! Thanks for watching the videos.
Black66 Iam Glad To See You Revisit The Bonanza Mini Bike. But Really Enjoy The Strech Frame Mini Bike
I have a lot more videos coming on the Mega moto. I post pics on it in the community tab between videos.
@@Black66 Thank You
Another great video, I’m not clear on how the governor bypass works. Would you give a detailed video on the subject? Thanks for the video, ride safely.
Thanks! ! Ya, I'll have to do that. I just happen to have a totally stock Predator with the governor still installed. I can use that for the video
Great videos 👍
Black66. If you pull the head are you able to let us know if it uses 27/25 valves? Another nice thing to know is if it uses a clone crankshaft. (rod journal and flywheel taper) Thanks.
For sure. I'll end up pulling the head off sooner or later. I get into it more after a while
Please make more vids with this motor/ minibike!! I just got one and it rips but only goes 32 sadly and I’m already wanting to do way more stuff with it😂
I have more videos coming out with the Duromax 208
@@Black66 can’t wait
@@Black66still waiting!!
@@scottyyeo7759 I have two videos made and more on the way. Just need to.put them in the mix.
I have the same motor and I was wanting to know what is the plastic black box on the rear bottom of the motor for? It's connected to tank and carb. Im askjng cuzmine feel off some where.
I'd like to see a build with the Duromax 274 small big-block. Dunno if they make any aftermarket parts for em tho.
Nice swap
I have the same engine on my mini bike and I was wondering how you got the throttle to stay full speed
What is the little black box under the gas tank called
Been wondering for awhile, where did you get your bike work stand? Being bent over all the time working on my bike is uncomfortable.
I wish I could tell you what store it came from. I got it from my dad a while back. He had a go-kart shop back in the 1980s. I'll have to see if I can find out where he got it from.
@@Black66 Thanks!
i would like to see you do a big block swap
I would like to do that!
@@Black66 compare it to the ghost
@Black66 did you make the sprocket?
No, it came stock on the bike. Thanks for watching!
Nice 👍🏼👍🏼👍🏼 .....what happened to your forks you crashed? .....i had a bonanza wit T bars 👍🏼👍🏼
Thanks! No, That's the way I bought the bike.
Hello can you please get a Coleman powersports scooter?
If you buy one I will review it.
@@Black66 Should I ask Coleman to send you one?
@@braydenlowe1745 That would be nice!
@@Black66 I will let them know that you're interested!
I always have to run into a problem no matter what it is. Hahaha
Fast lil rascal
To somebody who doesn't know all that much about Engines like myself lol you would think that going from 3.5 Horsepower to 7 Horsepower would make more than only a 5 mph increase in speed. But just goes to show it's not all about Horsepower when it comes to going fast. It's all in the gearing and performance parts. There are lower Horsepower Engines out there that will leave a higher Horsepower Engine in the dust if they're set up properly.
For sure! The engine is rated at 7h.p but it will only turn around 4k RPM the way its set up , it doesn't have much more top speed. Torque is a different story. The engine has a lot more torque than the 3.5 H.P so it gets up to a given speed a lot faster. I have more videos coming out with this engine. It gets a lot faster once it has more RPM potential...
Mikuni carb and straight pipe and some 22 pound valve springs and this this will be flying
I have more videos coming out on this bike. Like you said, it moves out !
Black 66 u truly are amazing I'm 14 and I do all my work on my bike and u taught me all of it and u responded back over night on an old vid much respect man keep up the great work
@@gameworkshop343 Thanks ! You are like me when I was 14 . I would work on my minibike all the time .
@@Black66 and since I have your attention do u think u could do a video on go power sports stage 4 head it's milled and ported and polished and I wanna get one cause the one on my bike is stripped and I would like to see what kinds performance gains I would get
Do a bt200x build
I would like to some time
@@Black66 my son an wife an I ride that one we all got one #Minibikelife ...love the channel
@@josiejones83 Thanks ! That is awesome ! That’s what it’s all about . Having fun with this stuff .
Can you explain to me why my spark plugs burn fast ?
What gear ratio does that have with the 208 I'm putting a 208 on my bike
It has a 5 to 1 ratio 12 on the clutch 60 on the rear. Check out the playlist
@@Black66 all right man I'm going to do that exact ratio ill like and subscribe thank you
Got a big friend? It'd be interesting to see what an extra 100 lbs of rider does to 0-30s and top speed!
I know weight makes a big difference! We used to race karts in the 1980's . I f there was no weight class you ,get the smallest person to drive .
👍
watch those forks on that bike they look bent or repaired (welded) wrong
Picked up the bike with the forks bent. I will be making a video on fixing them
Is the Bonanza a vintage bike, or can you still buy them new? If so, where, and how much?
Ya, its a vintage bike . I found this one on Craigslist. I have seen them on eBay . You can also buy simular new bikes at gokartsusa and go power sports and places like that.
@@Black66 Yeah, but GPS wants 900 bucks for their Rascal kit, PLUS the engine! I think that's too much. So I'll scrounge up used frames and parts. I know a guy, lol.
@@jeffrykopis5468 Ya, that's the best way to get them for sure!
Do you think the engine is too big for a pocketbike? And mere did you buy it?🙂
Hey man i was wondering the same to i have a pocket bike but idk if the engine would fit
ever found out yet?
@@fudge_pugzz5774 Nope. Im still waiting...
I was getting 49 stock, 53-58 with straight pipe im confused
Check out the other 80 MPH speed runs on the channel, This will clear things up! 😀👍😀 ua-cam.com/video/KwF21Tbe4Vo/v-deo.html
Can you modify my 200u ex for me
What do you need done?
@@Black66 i had a guy bypass the gov in now my bike is faster butnot stable fast because he took off pieces in rigged it
Get a $300 Amazon 125cc engine and put that together. They look like the ones they put in pit bikes
Bro i need help with my bike. I've been asking multiple times and no one replies or you.....
Love your channel but need to talk to someone to complete my project COLEMAN bike
Thanks, man! Email me.
@@Black66 i will next day or 2 thank u man!!!!!
lol cant have a rocket ship with the poosie gov restrictor on lol
It’s still a rocket . It’s just a super slow rocket 🚀 lol
@@Black66 how many links do u run on a 3.5 with a 12 tooth clutch 75tooth rear sprocket
@@SpACeCruizeR2o3 On that Mega Moto bike , it has 160+ links ! Because of the stretch it uses a little more
@@Black66 thanks man im just gonna order me a chaoin pre cut