Це відео не доступне.
Перепрошуємо.

How to Replace Starter 2011-2021 Jeep Grand Cherokee 3.6L V6

Поділитися
Вставка
  • Опубліковано 13 сер 2024
  • Buy Now!
    New Starter from 1AAuto.com 1aau.to/ib/1AES...
    This video shows you how to install a new starter from TRQ on your 2011-2021 Jeep Grand Cherokee (3.6L V6). The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
    Estimated installation time for a professional technician is approximately: 3 hours 6 minutes
    This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
    2011 Jeep Grand Cherokee
    2012 Jeep Grand Cherokee
    2013 Jeep Grand Cherokee
    2014 Jeep Grand Cherokee
    2015 Jeep Grand Cherokee
    2016 Jeep Grand Cherokee
    2017 Jeep Grand Cherokee
    2018 Jeep Grand Cherokee
    2019 Jeep Grand Cherokee
    2020 Jeep Grand Cherokee
    2021 Jeep Grand Cherokee
    Tools you will need:
    • Pry Bar 1aau.to/o9G/1AX...
    • 10mm Socket 1aau.to/obIR/1A...
    • 12mm Socket 1aau.to/ob9S/1A...
    • 13 mm Deep Socket
    • 13mm Socket 1aau.to/ob9S/1A...
    • 15mm Socket 1aau.to/ob9S/1A...
    • 22mm Socket 1aau.to/ote/1AX...
    • Trim Tool Set 1aau.to/oayQ/1A...
    • Pliers
    • Ratchet 1aau.to/ocbn/1A...
    • Socket Extensions 1aau.to/ob9S/1A...
    • Swivel
    • Block of Wood
    • Gloves 1aau.to/oa9D/1A...
    • Rust Penetrant
    • Safety Glasses
    • Floor Jack 1aau.to/oayT/1A...
    • Jack Stands 1aau.to/oakH/1A...
    • Pole Jack
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

КОМЕНТАРІ • 10

  • @TRQ
    @TRQ  3 місяці тому +3

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @MMAGUY13
    @MMAGUY13 2 місяці тому +9

    My wife starter went and after watching this video, I think I’ll just let the mechanics handle it

  • @judedavidson5453
    @judedavidson5453 Місяць тому +2

    I'm going to do my engine mount soon. May as well do the starter .

  • @PaulS72Baby
    @PaulS72Baby 28 днів тому +1

    I'm about to tackle this on Saturday. I'll definitely follow these steps. Thanks for taking the time to video this.

  • @kevinmcdaniels7612
    @kevinmcdaniels7612 2 місяці тому

    Very informative. Lot of complex steps.
    Makes it clear why the labor cost for this repair could be high.

  • @kevindrummer3014
    @kevindrummer3014 14 днів тому

    How long did this take you? How many hours of labor is reasonable from a mechanic?

  • @oscargarcia377
    @oscargarcia377 4 дні тому

    Does it differ with the 5.7 trim ?

  • @sheerwillsurvival2064
    @sheerwillsurvival2064 3 місяці тому

    Great video now I’ll be hoping my starter or motor mount doesn’t go out 😄

  • @paulkaras3389
    @paulkaras3389 2 місяці тому

    got a video for the 5.7 hemi?

  • @AFatherToTheFatherless
    @AFatherToTheFatherless Місяць тому

    Failed to mention whether it's AWD or fwd. Thumbs down 👎🏽