How to replace the diesel fuel filter Focus mk2 1.8 TDCI ⛽
Вставка
- Опубліковано 28 чер 2019
- BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Diesel fuel filter : bit.ly/dieselfilterC514en
- Motor oil : bit.ly/oilSPECIFIC913D5W30en
- Brake cleaner : bit.ly/brakecleaneren
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Change the fuel filter on a Ford Focus 2.
Discover the world of UseTool EN
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Focus 2 : maclede12.co/toolboxCLASOS3050en 🏆🤖💣
- 8mm socket
- Socket wrench + small extender
- Small flat head screwdriver
- Paper towel
- Liquid collector
🔝💪Safely lift your Focus 2 with the hydraulic jack: maclede12.co/jackCLASOH5304en and axle stands: maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝
- No lifting equipment necessary
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
Before starting your vehicle, make sure to fill the new filter by pumping on the primer pump until it hardens.
Usetool's infos
No particular piece of information necessary to carry out this operation.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] DIY: Making a liquids collector : • ASTUCE : Fabriquer un ... - Авто та транспорт
BUY THE AUTO PARTS you need for the operation : 👉 bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 bit.ly/MCD12AppStore, 🤖 : bit.ly/MCD12PlayStore 📱⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎
🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠
Needed parts:
- Diesel fuel filter : bit.ly/dieselfilterC514en
- Motor oil : bit.ly/oilSPECIFIC913D5W30en
- Brake cleaner : bit.ly/brakecleaneren
Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Change the fuel filter on a Ford Focus 2.
Discover the world of UseTool EN on bit.ly/usetool
Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool ES to repair your Focus 2 : bit.ly/supertoolboxEN 🏆🤖💣
- 8mm socket
- Socket wrench + small extender
- Small flat head screwdriver
- Paper towel
- Liquid collector
🔝💪Safely lift your Focus 2 with the hydraulic jack: bit.ly/upupupen and axle stands: bit.ly/axlesen recommended by UseTool EN 💪🔝
- No lifting equipment necessary
🚗📢💡 RESOURCES 💡📢🚗
Usetool's warnings
Before starting your vehicle, make sure to fill the new filter by pumping on the primer pump until it hardens.
Usetool's infos
No particular piece of information necessary to carry out this operation.
📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
- [ USETOOL'S TIPS & TRICKS ] DIY: Making a liquids collector : ua-cam.com/video/wVSbtm-DAgY/v-deo.html
Rubber seal comes between lower filter housing and filter, not between filter and upper cover. I stayed on the road 3x because of air entering the system (mechanics put the rubber seal on top of the filter). After the rubber seal is bellow the filter, the car works fine. The same information is in the service manual. I have a mk2.5 focus, 1.8 tdci
Thats correct! Not in video
Two main misstakes that I`ve picked up:
1. Missing bleeding
2. Seal goes under the filter (3:24 shows that it should be under the filter, not on the top) - that will make air coming into the system.
+
Well there is no bleeding method per-see as far as I know. The mechanics I have been visiting typically fill the filter case, put the filter in, wait for the filter to get wet and absorb part of the diesel, then fill it to the brim while waiting for the filter to get saturated with diesel. This reduces the need for bleeding since there is no manual pump for doing this. That is my understanding and I fully expect that the engine did not start right away in his case :)
You shouldn’t have to bleed it if you fill
It with fuel. Start it up and hold it at about 2500 rpm. It’s the encased types that you can’t fill with fuel that can be a total pain to bleed. Years ago as an apprentice mechanic we used to fill old commercial diesel filters with kerosene. The white cloud on initial start up was something to behold 😂
Bleeding is only for the diesel engine
@@Pinoystriker well. Video is about 1.8 TDCi Turbo Diesel Common rail engine ;-)
What about bleeding , no way that car started after that 😑
Thank you for doing the video, however there’s several issues. Firstly the large O ring seal was fitted on top of the filter and should be under it. Secondly you did not check the small O ring seal for splits. Thirdly, if you can start a 1.8 tdci without bleeding, then I need a new profession. The system work on pressure rather than a secondary pump, so the moment you disturb the system all the diesel returns to the tank, hence why you need to suck it back up by bleeding
I've not got the small rubber and my cars not starting at all I didn't get one with my new filter and didn't see one on my old filter
Hello have a question my ford focus started till yesterday now won't start it's rattle so alternator good but won't start started a bit one secund and stoped what can be
How come you didn't have to bleed the system after changing filter? I changed my Mondeo which has exact same system and had serious trouble as I got it air locked. :(
Did you get any air locks
HI GOING TO TACKLE THE FUEL FILTER ON MY 2014 MK3 3 FORD FOCUS IS IT A 8MM PRIMING PUMP
yes if it is 1.6tdci
No bleedy ?
LOL, yeh, just turn the ignition and she'll fire right up!! errrrr no, these are a pain in the arse to get started again.
It's totally possible it might start without bleeding if you were lucky enough not to introduce air into the system.
I’ve done this 100s of times and never needed to bleed one that’s been filled with fuel before hand. Start it and hold the Revs for a bit and it should be fine. It’s the encased filters that need fuel sucking through.
Please dont try this unless you know how to bleed the system.
*******Seal put in wrong place *********
This misinformation video can get a lot of people into trouble. Bleeding ? Seal ? Clean with Brake Fluid ? Don't forget to line up arrows on body ! Should be removed.
Please everyone report about this video. It's a harmful. DON'T DO ANYTHING WHAT ON THIS VIDEO!
1) Sealing gasket wrong place. It must be on bottom not on top
2) After changing filter, system must be unbleeded. Otherwise engine will not start
What a load of rubbish. The seal is in the wrong place and he never bled the fuel system. Not a chance that car started straight away.
lol, rubber sealing ring on top of filter housing first, then filter, then sealing ring, this video is not correct. ford technition.
No priming that never started and background music for a 5 year old
Absolute tw** of a job it’s so much more difficult because there’s no lift pump
Its all wrong!
What do you mean ?
Housing, gasket, filter, cover
@@UseTool_EN the armchair experts are out in force in this thread. Probably never changed a fuel filter on their lives but read something on the internet.
This video is TOTALLY wrong! Please DONT follow this advice as your car won’t start afterwards
Hello, what method do you recommend? What's wrong with it?
The seal Is in the wrong place and this will stop the vehicle running
also you did not show any bleeding method ? this would also stop the vehicle from starting