Festool Domino (do this to stop common problems)👍
Вставка
- Опубліковано 13 вер 2024
- Festool domino miss alignment problems. These are 3 ways I get over them so you don’t have to.
Check out my new channel on bathrooms and kitchens. 👇👇👇👇
@MarkThomasCustombathroomsa-d5l
I just use the appropriate set/up block setting on the height pre-set if I want to customise it.
At the end of the day the height isn’t that significant, good practise says you should mark up your face sides and reference diff the same face. Thinking you’ve got your new adjuster thingy might solve the problem some of the time, however for example ply is rarely exactly 18mm, so if you don’t reference off the same face then you’re back to square one. Similarly if you use 2 different batches or manufacturers of mdf they can be slightly different thicknesses.
Yes correct but if you can cut off the same sheet then all your thickness should marry up. If I just cut batches off 1 sheet for one part of the job. Once I start a new sheet of MDF I can keep that separate to compensate for the difference in thickness. I do mention in my video to still reference your face to get your face of your workpiece line up great. Thanks for the comment 👍😄
As a complete amateur with a Domino machine, I always make the 20mm setting mistake and get them the wrong way round so great reminder Mark. Will buy one of those guides now.
You want regret it RpR. As I don’t use the domino daily I was making the 20mm mistake also. This will make my life easier.
Glad it’s helped you out. They are on eBay 👍😄
@@markthomas5139 yes ordered one from eBay tonight.
Cheers Mark, great pointers there 👍
Thanks Adrian 👍😄we have all been there with what I’m showing in my video. 👍
Keep in mind that there is a scale on the depth adjustment and you can set the adjustment to any depth. You don’t need the little plastic gauge with stops. That just speeds up getting the right adjustment. Just slide it out of the way and set your stock depth on the scale.
Yes there is 👍 honestly I don’t bother using it just in case I’m half way through a project and need to reset. It’s only just in case I’m not in the same exact position. 👍😄
This is great advice, cheers buddy!!
No problem buddy 👍😄 glad you got something from it 👍😄
Great video Mark !!! thank you could you let me know where you bought the replacement gauge from , thanks
Thank you Michael 👍
The replacement depth gauge is from eBay. I only payed £9.99 👍
@@markthomas5139 Thanks Mark !!!
Ordered mine today 👍
That’s great news,you want be disappointed 👍😄
If Miss Alignment and Major Error have a child, would he be Master Carpenter? 😂 (it’s spelled „misalignment” ;) )
No as he would be an Alignment Error obviously 🤣 thanks for the English lesson mind 🤣
Luckily I use my hands to work and not my English 👍😄