Looks great! How does the difficulty measure up compared to window tinting? What gloves are those? Do you think a set of cragar SS mags could be wrapped like this???
It is much harder then applying window tint. If you are not familiar with vinyl wrapping you are going to find it almost impossible to do. The gloves are to protect your hands from the heat gun and the hot vinyl as you will have to work it wile hot. I’m not familiar with that rim design, sorry. I hope this helps, good luck 🍀
Give it a try, it should work. Make sure the wheels are perfectly cleaned before install. Use alcohol at the end to make sue you remove all the grease.
How long did it take to do all 4? Did the vinyl try to start lifting or peeling? Thanks for the awesome video going to try to wrap the faces of my 26’s tomorrow and this video has helped me:)
99 Hugger SS It took about an hour per wheel. On the preparation, make sure you clean the wheels with alcohol so it doesn’t have any oily spots. The vinyl will try to lift on the corners so make sure you have enough material overlap on the backside of the rim. Good luck! Happy to know this was helpful to you 👍🏼
Yes, the vinyl is still on. Got a few scratches here and there but for the most part still looks good.
Nice 😎looks really good
Thanks 😉
Any update on this? Still holding up?
What size wrap do I need for 20inch rimps
Looks great! How does the difficulty measure up compared to window tinting? What gloves are those? Do you think a set of cragar SS mags could be wrapped like this???
It is much harder then applying window tint. If you are not familiar with vinyl wrapping you are going to find it almost impossible to do. The gloves are to protect your hands from the heat gun and the hot vinyl as you will have to work it wile hot. I’m not familiar with that rim design, sorry. I hope this helps, good luck 🍀
They look a lot similar to torque thrust, but they’re old school 15s, I just put up a video of me cleaning up a pair of them.
Give it a try, it should work. Make sure the wheels are perfectly cleaned before install. Use alcohol at the end to make sue you remove all the grease.
I plan to! Hopefully it works out well! Thanks for the advice!
How long did it take to do all 4? Did the vinyl try to start lifting or peeling? Thanks for the awesome video going to try to wrap the faces of my 26’s tomorrow and this video has helped me:)
99 Hugger SS It took about an hour per wheel. On the preparation, make sure you clean the wheels with alcohol so it doesn’t have any oily spots. The vinyl will try to lift on the corners so make sure you have enough material overlap on the backside of the rim.
Good luck! Happy to know this was helpful to you 👍🏼
@@94SevenMedia Thanks! So the vinyl did start lifting on wheels after the install?
Good!! Job!!
How durable are wrapped wheels?
They are very durable. As durable as wrapping the body. However you still have to avoid scratches when possible.
Why the top view tho makes no sense keep the camra on the rim