Thank you!!!! I sheared off the needle clamp screw head by tightening too much. Had to drill out the broken screw and replace the needle clamp. Your video sure helped me get it back together again.
Literally just saved me sooo much money!! My machine has been shredding my thread to the point I stopped using it. Replaced the thread guide after watching you- and yes, I took it ENTIRELY apart lol- but was able to put it back together and she is sewing up a storm!! Thanks!!!❤
After frying many places in Canada,some took the money off right away and a few days later got it back, because they didn’t have any left. You guys had it and sent it fast. So worth paying the $25.- for shipping. Thank you 👍🏻 we followed the video and all is well again.
It’s great to see more about the Juki! I a Juki and was wondering if it’s possible to buy a double needle to use for topstitching. If it’s not possible to get a double needle for my Juki, I’ll try to get one for my Husquevarna.
What do you do if you have unscrewed the needle clamp too much and now the needle is hard to it in? I also think it’s made my needle slant enough to go to close to the throat and cut the thread. I’m ready to tear my hair out! With this thread breaking.
Does anyone else have an issue with that little thread guide making a pinging sound from the thread catching when sewing at fast speeds? I do and it's threaded properly but has always happened with this machine, I think it's a flaw in the design of that little guide only being a half circle and leaving the thread the opportunity to bounce out at high speeds. Mine looks just like this one in the video and I've watched plenty of these to be able to say with utmost confidence that it's threaded right, the thread is acceptable and good quality and the tension is spot on, so it just seems like a flaw but an annoying one that slows down my sewing speed as to lessen the times it does that and cause issues with what I'm making. Any help or suggestions are appreciated.
I would recommend joining our Facebook group called “Juki Junkies”. Answer the few questions to join the group; once you’re accepted into it, comment your issues on there. We have over 19,000 Juki Junkies in the group that are happy to share their experiences and solutions. facebook.com/groups/1532238067076220/
Thank you so much!!!! I'm so glad I didn't have to send my beloved Juki to be repaired for this!
Thank you!!!! I sheared off the needle clamp screw head by tightening too much. Had to drill out the broken screw and replace the needle clamp. Your video sure helped me get it back together again.
I loved the start of the video. im still smiling lol
HAHA I love that!!! :)
Literally just saved me sooo much money!! My machine has been shredding my thread to the point I stopped using it. Replaced the thread guide after watching you- and yes, I took it ENTIRELY apart lol- but was able to put it back together and she is sewing up a storm!! Thanks!!!❤
Yay thanks for watching
You saved me a lot of down time. Thank you!!!
❤thank you! My needle assembly is put back together! Phew.
You guys just saved me! Super clear instructions my clamp is back in place and ready for some action.
Great video, and I love your sense of humor!
This saved my life. Thank you!!
I love saving life's :)
You guys and your videos are very informative!!!
Thank you. We appreciate the compliment. Gigi
U make it look so easy!!!!!
It is ;)
@@JukiJunkies 😊😊😊
Thank you! You saved the day!
Great to hear!
Thank you for demonstrating this. Great job!
Glad it was helpful!
🤣😂🤣🤦♀️, thanks for the laugh in the beginning and the info. I've never had an issue but at least I know how to fix it now if I ever do.
Glad it was helpful!
EXACTLY what I needed. ☺️♥️
So glad to help ya! Visit our website sometime for more information www.jukijunkies.com
yooo finally a found a vid with similar assembly as mine thanks so much!
Your welcome Nick!
Thank you! Perfect instructions
Thank you. This is very informative.
Thanks. Just subscribed!
Thanks for the sub!
Great video
Glad you enjoyed it
Thankyou so much for the video. I had it all wrong and it kept getting caught on my fabric etc
Glad it helped!
Very informative!
Hi, very informative video. It just happened to my juki tl2010q . My question is, where do I get a replacement guide?
Here jukijunkies.com/product/juki-thread-guide-replacement/
Do you send to canada
After frying many places in Canada,some took the money off right away and a few days later got it back, because they didn’t have any left. You guys had it and sent it fast. So worth paying the $25.- for shipping. Thank you 👍🏻 we followed the video and all is well again.
Thank yooooouuuuu! ❤
Thank you!!!! -HD
I have a Juki TL2010Q sewing machine and was wondering if you know if there’s a double/twin needle that can be used on it to do topstitching?
Unfortunately No!
no biggie, I was able to get one for my Husqvarna 💜
It’s great to see more about the Juki! I a Juki and was wondering if it’s possible to buy a double needle to use for topstitching. If it’s not possible to get a double needle for my Juki, I’ll try to get one for my Husquevarna.
Its not capable to do doubled needle
Thanks, is that a needle threader I can buy? I broke the one that came on machine😢
Here jukijunkies.com/product/needle-threader/
What do you do if you have unscrewed the needle clamp too much and now the needle is hard to it in? I also think it’s made my needle slant enough to go to close to the throat and cut the thread. I’m ready to tear my hair out! With this thread breaking.
I had to buy a replacement needle clamp, but it didn't come with the washer...do you know where i can buy one?
Email sewingmachines411@gmail.com and we can try to locate one for you :)
I have mine behind the needle it looks like you have yours in front of the needle?
it should be like mine :)
Need to always take a picture so you know how to put this back the way it was
Does anyone else have an issue with that little thread guide making a pinging sound from the thread catching when sewing at fast speeds? I do and it's threaded properly but has always happened with this machine, I think it's a flaw in the design of that little guide only being a half circle and leaving the thread the opportunity to bounce out at high speeds. Mine looks just like this one in the video and I've watched plenty of these to be able to say with utmost confidence that it's threaded right, the thread is acceptable and good quality and the tension is spot on, so it just seems like a flaw but an annoying one that slows down my sewing speed as to lessen the times it does that and cause issues with what I'm making. Any help or suggestions are appreciated.
I would recommend joining our Facebook group called “Juki Junkies”. Answer the few questions to join the group; once you’re accepted into it, comment your issues on there. We have over 19,000 Juki Junkies in the group that are happy to share their experiences and solutions.
facebook.com/groups/1532238067076220/
Awesome help! Thank you so much!😊
You're welcome!
Thanks so much for the info, very informative. 😊
You are so welcome!
Thank you for this demonstration. Great job!
You're very welcome!