All these tours make me jealous. Last time I was in Orlando for my marching band's trip, I was literally RIGHT BEHIND THE BUILDING! I wish I could have said hi!
Hey there Aaron! Just had a question, at 5:19 the video started playing the "Gooney Bird" song. What was the song name cause I think it's really interesting!
+therockafire I don't know! I wonder if silicone would work? It's a very different material - harder to paint and temperamental (wont cure next to some materials) but lasts forever once it's made... I'm experimenting with stuff now on some small puppets.. I haven't quite figured it out yet. I would love to be comforted in the knowledge that rockafire will continue in some form or another into the distant future. Glad you still have the molds!!
+Jim Campbell I'm making some Animatronics as we speak! Look up the page Limestone Engineering on Facebook and you'll see my work. I'm currently planning to make and prehaps sell some latex masks of my characters Wilbur (designed to look like a relative of Billy Bob) Kathy the cat, Wolfre the wolf, Snappy the Croc (A keyboard playing Crocodile). I hope to be talking to you on Facebook and maybe I can give you some mask making tips!
+therockafire This might be a really stupid idea, but instead of pouring latex into the mold, did they paint it in layers on the outside of the mold? That, what if you shaved down the stiff, solid mold you already have, make it a bit smaller and then use it as a plug? So paint the inside of the mold to build up the mask to the right thickness, then place the plug in to keep pressure and hold the latex in place until it dries?
Congrats! And for the ultimate challenge, scaled molds with a goop called "Hydrospan 400". ..only heard of it from a few FX sites, not worked with it myself. But.. It's a resin that, when fully dried (30 minutes in the mold, then two weeks, probably more adjusting for humidity) it retains most detail but ends up 55-86% the size of the original part depending on how much water is in the original mix. it might be a near-impossible thing to work with at this bulk. . Maybe contact them for a review barrel with some formula support from their techs since, basically, I don't think it's been done to this scale. Hah.
hello, quick question, what kind of latex are you using? The latex I use is yellowish transparent after drying, yours looks like foam latex, regards Tamino
Will you do a tutorial on how to make a j fats mask please that would be amazing. Me 10 year old daughter is learning so much from you and she wants to follow in your footsteps and become a robotic engineer just like you . Thanks for speaking with me
That song, Makin' a Mold is soo hilarious and cringeworthtly Oh no! It seems to be stuck! It seems to be stuck! Cant get the mold out! Call Aaron! Call Aaron! Aaron can you get it? Aaron can you get it? Aaron got it!
Anyone know exactly how to get one of these masks? I'd loooove one- I'd pay obviously. I heard they were about 100-200 dollars depending on the character?
I love the "making a mold" song in the background....clever
Me to
Me too
me to
me too* me too* me too* me too*
@@bvnbun me too me too me too me too me too me too me too me too me too me too. 😂
We need a single of the "Makin' a Mold" song. This gets stuck in my head everytime I watch this video.
WE MAKIN IT OUTTA THE FIBERGLASS WITH THIS ONE
fr bro
All these tours make me jealous. Last time I was in Orlando for my marching band's trip, I was literally RIGHT BEHIND THE BUILDING! I wish I could have said hi!
My matching band is going to Orlando in May! I doubt I'll be able to stop by but I hope I at least _see_ Creative Engineering.
That was so nice of Jeff to help you make a Gooney Bird mask and I wish you best of luck on preserving Creative Engineering :)
This channel needs more publicity. There's so much fun to be had!
I really like the Gooney Bird music when your pouring the latex!
Michael here: Congratulations, Aaron Fecther! With a help from a friend, You finally made a Gooney Bird Mask for Patrick a.k.a. Looney Bird CEC!!!!
He’s So Lucky To Have The Birthday Bird !!! ITS SO CUTE
Ooh no it seems to be stuck it seems to be stuck call Aron call Aron. Aron got it 🤣
No it’s actually: on no it seems to be stuck call Aaron call Aaron! Aaron can you get it Aaron can you get Aaron got it!
@@tbmm2 *can't get the mold out call Aaron... *
@@Alex-hn9qj bruh that was a year ago…
@@tbmm2 Ik but i live this video and I watch it almost everyday
@@Alex-hn9qj I see you’re a man of culture as well.
I think i should say God blessed Patrick and Aaron Fechter for making the gooney bird mold easier.
For everyone who keeps asking what song is at 4:19
It is "Listen To The Gooney Bird - Homer and Jethro (Songs To Tickle Your Funny Bone)"
Thank You :)
Congrats on succeeding with the mask!
I wish I had the kind of money to buy a mask/character...
Oh my god now I want a birthday bird-
I love him so muchhh
That's so cool! I wish I could have come to take a tour while I was in Florida. But I went with a friend and her parents. RIP
The thing what I wanted for my dad is a billy Bob mask since he's a huge fan of the rockafire explosion
I am so glad that you guys are so happy together
Mama at the end with Gooney, that poor bird
I wish that I had a Billy Bob mask, dat would be so cool
NAME YOUR PRICE
I wish that I would had a Rolfe Mask,that would be Awesome.
DubWufor Bass they spelled it wrong on purpose.
Funny how there's a comment asking what the gooney bird song is below your comment
Well done w this video! good music .. overall just well done Aaron :)
Glad to see that it all worked out in the end!
WOW. This is awesome!
Hey there Aaron! Just had a question, at 5:19 the video started playing the "Gooney Bird" song. What was the song name cause I think it's really interesting!
listen to the Gooney Bird ua-cam.com/video/laKC7-tuALQ/v-deo.html
I think it was called “gooney bird” or maybe “the gooney bird” or “the old gooney bird” I don’t remember
@@Joe_pera_fan thanks
I love Birthday Bird he's cute if I had One I'd attach him to my mom's dashboard in her car as like a little bobble head.
Making a mold making a mold!
Unikitty90975
~making a mold, making a mold!~
is goony bird a boy or girl
Sarah Sims a boy
no gooney bird is a girl
@@jaspert.jowlsthehounddogcl1483 pretty sure its a boy
Technical questions: do you mold with latex? And is the problem that latex won't cure with a fiberglass mold?
+Jim Campbell -Yes..But I know we used to make masks in these fiberglass molds in the 70's. The question is, "How did we do it?"
+therockafire I'm pretty sure you might have coated the inside with some non stick stuff then made the mold!
+therockafire I don't know! I wonder if silicone would work? It's a very different material - harder to paint and temperamental (wont cure next to some materials) but lasts forever once it's made... I'm experimenting with stuff now on some small puppets.. I haven't quite figured it out yet. I would love to be comforted in the knowledge that rockafire will continue in some form or another into the distant future. Glad you still have the molds!!
+Jim Campbell I'm making some Animatronics as we speak! Look up the page Limestone Engineering on Facebook and you'll see my work. I'm currently planning to make and prehaps sell some latex masks of my characters Wilbur (designed to look like a relative of Billy Bob) Kathy the cat, Wolfre the wolf, Snappy the Croc (A keyboard playing Crocodile). I hope to be talking to you on Facebook and maybe I can give you some mask making tips!
+therockafire This might be a really stupid idea, but instead of pouring latex into the mold, did they paint it in layers on the outside of the mold? That, what if you shaved down the stiff, solid mold you already have, make it a bit smaller and then use it as a plug? So paint the inside of the mold to build up the mask to the right thickness, then place the plug in to keep pressure and hold the latex in place until it dries?
I like how the clown is just ominously standing there in the background throughout most of the video
I watched this I think 2 years ago, and just remembered about it, so here I am, back at this random video I found on UA-cam
I loved that little song
is gooney bird related to looney bird
Yeah gooonybird was the forerunner
I'm telling you this is huge.
Congrats!
And for the ultimate challenge, scaled molds with a goop called "Hydrospan 400".
..only heard of it from a few FX sites, not worked with it myself. But..
It's a resin that, when fully dried (30 minutes in the mold, then two weeks, probably more adjusting for humidity) it retains most detail but ends up 55-86% the size of the original part depending on how much water is in the original mix.
it might be a near-impossible thing to work with at this bulk. . Maybe contact them for a review barrel with some formula support from their techs since, basically, I don't think it's been done to this scale. Hah.
I LOVE the making a mold song haha
get that clown in the background working
+Antonio Debono Lord, i'ved seen pictures of him, he's scary asf.
I know he should
OH HEEEELLLLL NO!
at 5:20 ?
If he turns on we are dead
Aaron Dude I Love Your Videos and This Is Huge
It honestly looks really good
5:40 Bubba is watching
I HOPE SOMEDAY I CAN BUY MITSIE I RLLY LOVE HER
Aaron is such a nice guy. Surprising that Chuck E Cheese has gone bankrupt first! CEI FOREVER
you know what I really want? a billy bob toy or animatronic or mask they would all be great
What do you use to make the plaster 2:10 ?
That could be silicone
making a mold making a mold making a mold
You forgot about that one line, “making a mold”
Don’t forget “making a mold”
Everything seems to be going alright
The music in the background is Genius!
I love how mamma grand bags hit gooney bird in the face
I very much enjoyed the song @2:00 😂
Yeah Aaron's the best guy ever please go to his place it's really fun
what's a gooney bird? i thought it was LOONEY bird... is that the looney bird from wolf pack 5 or hard-luck bears?
It’s like looney bird’s father gooney bird is from the hard-luck bears
id love to have a rolfe mask. a thought just came to me.....i could try and wear it. i have a mask made of cardboard and duck tape my friend made me.
hello, quick question, what kind of latex are you using? The latex I use is yellowish transparent after drying, yours looks like foam latex, regards Tamino
How does this work? Does the plaster suck moisture from the latex so that it cures where it touches the plaster?
Ah, This video answers the question: ua-cam.com/video/FnrKNzV3gc0/v-deo.html
So jealous right now XD
+Puppy P. McCartney hes selling one now for 250 dollars
TheTinyGoatGirl57 Found you! 😂
Coolguy198 4 oh my XD
How much would a billy bob mask be?
How much would a mask cost? I'd want a billy bob one if I had the money
LOVE THIS I USED TO WATCH THIS WHEN I WAS 8 OR 9 IM 14 ALMOST 15 NOW OMGGG LOVE THISSS
Nice to see your success :> Also, Is there any updates on the Wolf Pack 5?
who else saw the clown in the background????
me
Me
Me!!!!!
Me
Remigiusz wiśniewski me
5:26 there is a creepy clown behind him at the left that was just sitting on a yellow and red machine
You are amazing man!!!!
I see the legendary clown in the back!
Is there a difference between Gooney Bird and looney bird?
1:03-1:08
SORRY BUT HIS VOICE AND FACE 🤣
Good job Aaron
I love this video
I love your Channel
I had to come back 2 hours after watching this because I was repeating 'making a mold' over and over
They're really good and cool
Love the animatronocs
I just saw Keanu which had a scene that took place in a rock afire warehouse- were you involved in the filming?
I miss the hard luck bears jamboree
Do you ever get bubbles in them
Wait can you post videos of the gooney bird showtape?
Oh my god the making a mold song is killing me lmfao!
0:50 my dad knows how you guys used to do it
With the right price do you make custom animatronics
I mean the little bird that guy got at the end the bird is sooo cute
how much would it coast for you to make one again
how many layers of silicone did you put on
I sing this song every day
That bird mask is terrifying
THE MOST TERRYING IS THE CLOWN IN THE BACKROUND
Will you do a tutorial on how to make a j fats mask please that would be amazing. Me 10 year old daughter is learning so much from you and she wants to follow in your footsteps and become a robotic engineer just like you . Thanks for speaking with me
Do you have any videos or know of any videos on how to make a animatronic like loony bird and the crew from scratch?
Can't stop laughing through 0:07-0:10 so funny XD
ME: replays 0:10
Also me: *Mouth mouth mouth mouth*
Hit me in da mouth
*caw!*
i love the gooney Bird 🐾
Can you make a video of how to make a belly Bob mold
I love the song
I'm one of your fans and I've always wanted to know how do you do it please tell me how to do it
Wait do you know where I can buy this
Just stumbled on this love it
When are we getting the Making a mold techno dubstep remix
Well, congratulations! =))
Wow Jeff Has A Cool Birthday Bird I Sure Wish I Had A Birthday Bird
I have always wondered what happened to the hard-luck bear shows so does anyone know what happened to them?
Aaron has a show in his warehouse
I'm going to Disney world in Orlando Florida. And then I realized CEI is in Orlando, so I might go.
What's the song at the end singing about gooney bird?
Omg i expected it to be little
how do you do that animactonic thas so cool
What's the song at 4:19
where can i get that Guac-a-mole shirt, if you sell those cause i would like to have one.
That song, Makin' a Mold is soo hilarious and cringeworthtly
Oh no! It seems to be stuck! It seems to be stuck! Cant get the mold out! Call Aaron! Call Aaron! Aaron can you get it? Aaron can you get it? Aaron got it!
Anyone know exactly how to get one of these masks? I'd loooove one- I'd pay obviously. I heard they were about 100-200 dollars depending on the character?