@@vtbaggerbro6291 These LEDs and taillight lenses will fit the Harley Sportster, Dyna, and Softail lineup according to the manufacturer. So you should be good for a Low Rider S!
I di dmy 04 Dyna the rear lights were not compatible and I had to install the voltage regulators for each light to stop the hyper flashing. Not a quick job on my bike.
I bought these LED's for my 15´ 883, as soon as I got them I wasted no time and went straight for the install, but I got heartbroken when i noticed my turn signals are single contact, i tried to squeeze them on anyway but only the turn signals worked, not the white surrounding halo light, any help would be much appreciated, maybe I just bought the wrong variation? Thanks in advance :D
@@TheTripawdHank0012 I ended up getting them to fit. I think I was installing them the wrong way, try to turn it around 180 I think that’s what got it for me
Check OEM parts website or direct from harley parts for the housing. You want something quality to house that light that won't crack off when you hit the first bump.
@JayPlaysGames any advice on how to do this, just put them in this morning and definitely want them to work right. And how to install the transistors possibly?
I noticed that after I published the video 🤣 oh well. I have a custom plate now anyway so it's not a big deal. But thanks for lookin' out for me there ✌🏻
I’m late to the party here but wanted to add something. Hyper flash is illegal as far as I know everywhere in the states. The DOT set a limit of 120 flashes per minute maximum. Anything over is illegal. That said you may or may not be over but it’s likely you are. It’s deemed a nuisance and a distraction to other drivers on the road. It’s also pretty annoying which I guess falls under distraction. Other drivers will thank you to fix the hyper flash. The police will tell you to fix it with a ticket! Hey that’s kinda like click it or ticket! I’m a poet! Hold the applause! Thank you, thank you.
@@briansouth9325 it’s not my law man. It’s been around longer then me I suppose. I dint know that it would make you seen any better than normal flash, it’s just the high rate could be a distraction or even a little blinding to those behind you. Some taillights will are pretty bright these days.
Have you guys upgraded and of the lights on your ride? Are you planning to? Let me know down below!
Do you know if they have these taillights for a Harley Low Rider S?
@@vtbaggerbro6291 These LEDs and taillight lenses will fit the Harley Sportster, Dyna, and Softail lineup according to the manufacturer. So you should be good for a Low Rider S!
I di dmy 04 Dyna the rear lights were not compatible and I had to install the voltage regulators for each light to stop the hyper flashing. Not a quick job on my bike.
Great tutorial! Looking forward to doing this with mine and my wife's harley! Thank you.
@@jeffarmusik9115 you’re welcome! Happy to help!
Just bought a new to me ultra limited. I was excited to see the first owner had done a LED upgrade. Good to see how this was done.
Congrats on the new Harley! The LED's are easy to do, but it's definitely nice having some things done already when you get your 'new' ride.
Hi what seat / backrest is that ? Looks good
Would the hyper flash ruin electrical? Wondering how it’s working out now? Looks dope
awesome video. I just did mine and it looks good!!!
Definitely a nice upgrade for our bikes. LED's are just the way to go anymore. Lots of advantages, no real disadvantages.
Hi thank you for the instruction with the installation of the indicator light. Just a quick question, Is this light fit my Harley Blackline?
I bought these LED's for my 15´ 883, as soon as I got them I wasted no time and went straight for the install, but I got heartbroken when i noticed my turn signals are single contact, i tried to squeeze them on anyway but only the turn signals worked, not the white surrounding halo light, any help would be much appreciated, maybe I just bought the wrong variation? Thanks in advance :D
do you have any videos for deleting tail lights and installing only rear turn signals?
Sorry I do not. Not legal in my state so no point in trying to do it to my bike, sorry 🤷🏼♂️
Looks great! Best mods are quick, cheap, and look good!
Those are the best mods!
hey bro
where did you get that backrest for your seat?
I been wanting to know what the seat was and the back rest I love the looks of it
Good kit, Thanks for sharing.
Thanks for watching!
Is it the same process with the fatbob?
I would use the load equaliser kit otherwise u could burn out damage your tssm module
Hey can you let me know what seat that is and the backrest
Do they work as running, brake and turn signals?
Yes to all 3, and much better than stock!
@@MOTOBLADE do you remember if it was 3 or 4 wires? Trying to find a set
I can't get a grip on the new led lights after I push the connection in . Nothing to grab. Any suggestions?
I have the same ones but my running lights go out when the brake lights go on how do you fix it?
Can you let me know where ypu got the lights... would it work for a 2006 883 xl sportster. Tyia
My rear blinkers Aren't on all the time do I have to get a kit So they will stay on
I got the same lights. They don’t fit in the rear because the small tabs are off :(
(05 sportster)
Same exact problem, also 2005 sportster 883 custom
@@TheTripawdHank0012 I ended up getting them to fit. I think I was installing them the wrong way, try to turn it around 180 I think that’s what got it for me
Do you know where I can find the light housing? I bought some cheap lights off amazon but looks like they glued the leds… and they suck
Check OEM parts website or direct from harley parts for the housing. You want something quality to house that light that won't crack off when you hit the first bump.
Hi! Would these fit the 2017 1200 roadster xl1200cx? I have been planning on getting these but im not sure if the drls would light up
Will these work on a 1994 Sportster that does not have the rear running lights only signals.
I just changed mine and i like the hyperflash but then the red key on my odometer comes on is that telling me that the resistance is off ?
You know, I was wondering what that was. But mine was coming on before I did this install, so I don't really know if that caused it or not? 🤷🏼♂️
You have to sync your new turn signals with the bike! Otherwise they’ll drain your battery
@JayPlaysGames any advice on how to do this, just put them in this morning and definitely want them to work right. And how to install the transistors possibly?
@@teammatrix1208 Here you go ua-cam.com/video/r0-zC5UKMJQ/v-deo.html
It’s a quick fix
How did you remove the rear turn signal cover?
Same as the front? He shows how to do the front
where did you get this kit from?
Check the link to Amazon in the description. It's $35
Hey bud if you watch through the whole video again you blur your plate for one scene then almost all the other times you see it it’s not blurred btw
I noticed that after I published the video 🤣 oh well. I have a custom plate now anyway so it's not a big deal. But thanks for lookin' out for me there ✌🏻
@@MOTOBLADE yourwelcome
🔥🔥
I’m late to the party here but wanted to add something. Hyper flash is illegal as far as I know everywhere in the states. The DOT set a limit of 120 flashes per minute maximum. Anything over is illegal. That said you may or may not be over but it’s likely you are. It’s deemed a nuisance and a distraction to other drivers on the road. It’s also pretty annoying which I guess falls under distraction. Other drivers will thank you to fix the hyper flash. The police will tell you to fix it with a ticket! Hey that’s kinda like click it or ticket! I’m a poet! Hold the applause! Thank you, thank you.
So it's illegal to be more seen, got it
@@briansouth9325 it’s not my law man. It’s been around longer then me I suppose. I dint know that it would make you seen any better than normal flash, it’s just the high rate could be a distraction or even a little blinding to those behind you. Some taillights will are pretty bright these days.