LED Turn Signal Comparison
Вставка
- Опубліковано 6 січ 2021
- In this video we compare Kuryakyn High Intensity, LuminEZ and Tracer LED turn signals and break them down into Good, Better, Best categories! For more information on any of these visit our website.
High Intensity Bulbs:
www.kuryakyn.com/products/656...
LuminEZ
www.kuryakyn.com/categories.a...
Tracer
www.kuryakyn.com/categories.a... - Авто та транспорт
Absolutely LOVE my tracer lights.
The tracers looks sick! Wish I would have waited for these over getting the ProBeams and Genesis 4’s from Custom Dynamics. Love how the light is diffused much more.
Awesome..look good on my 17 Sportster low
The Tracer were my choice of LED turn signals after an exhaustive comparison with HD and Custom Dynamics as the Tracer just has the best and unique design and the defused light technology in my opinions is the best vs the rest.
These are sweet. I too should have waited to upgrade my 2002 FXDWG. I still might switch if indeed they have a square back taillight. Flush, low profile does not work for stock Wide Glide Dyna or softail standard.
thx for your information Bro
Do I need to install load resistors when changing to led?
I want to do the tracer front/rear and brake on my 18 heritage. It flows so nice with the style of the headlights from HD.
Yes they do!
@@KuryakynHoldingsLLC still looking May for the tail light?
I just got the sportster the front tracers switch back white/amber and they are freaking bright.
How much do these cost and what do you recommend for a 2004 harley davidson heritage softail and where to purchase. Thanks
I have a 2021 Roadglide & I am looking for the Tracers for the front, but I only have single contact bulbs. How can I fit these??
Is the Tracer available for flat turn signals? 2003 Harley Softail Classic.
Bought tracer from revzilla for my 2019 hd48 xl1200x. Front signal works (amber) but the white for running lights does not work. For the rear p/n 2905, unfortunately is not fit. The diameter of the bullet turn signal is 2.5”. Any advice on what to do?
Are these available for metrics?
Have you used a light meter to see how bright they are? Pro Beam states theirs are 6000k.
Does tracers fit on Indian scout ? I would like to see them on my bike.
Can you show how to remove the lenses on a kuryakyn signal bar 2098?
Question, when you buy qty 1 of either the front or rear does it include the pair? Or is it $116 for each led replacement?
They come in pairs!
need tracers with chrome and black visors or bezels
I have a 2005 HD Softail Night Train, without CanBUS, and your original Panacea system installed. To run a pair of High Intensity bulbs up front, will I need a load equalizer?
Thanks.
Cheers!
Reach out to our Tech team for help!
Technical Support: 715.247.2983
techsupport@kuryakyn.com
I think you ought to come up with some for Indian roadmaster
Unfortunately none of our bulbs, inserts or conversions will work on an Indian, however we do have a wide assortment of full replacement LED turn signals, with optional mounts to make installing nice and easy.
www.kuryakyn.com/category/23/custom-taillights-turn-signals
Does the rear tracer blink in amber when you're using the signal? or is it red?
Rear Tracers blink red!
U CANT run Visors on rear with Tracer light...?
Are there any plans to make/stock Tracers for the Indian lineup?
No plans to make Tracer for Indian at this time, however that may change in the future!
What’s the tail light # ? Matches the turn signals perfectly
There is a few different part numbers for the different lens but they should be available mid March!
I have a 1989 honda shadow vt1100c and I have to replace the rear turn signals and I have the bullets what should I get to make the lights function properly?
Are you planning to replace the entire turn signal or just the bulbs? If just the bulbs, our high intensity bulbs might work but make sure to check the dimensions and also make sure there is enough clearance in your turn signal without interfering with the lens. A good place to start is to measure the length of your bulbs!
@@KuryakynHoldingsLLC I'm replacing the whole set but the ones that were on my rear fender were aftermarket and they didn't work I got the bullet 1000 and only doing the rear turn signals
Ordered those tracer front and rear cost $230. Lets see how will they look on my 2020 softail slim
Hey man, any way I can see how they look on your bike?
@kuryakyn The Tracer is a super nice light. I have a HD Road Glide. I see you have rear tail lights signals and a taillamp coming in mid March. Any plans on coming out with similar Tracer light to match King Tour Pack lighting? Thank you
We do! Targeting for a late summer 2021 release
I need a set for the rear turn signals on my 2006 Deluxe.... Part# ??
Are you looking for the Tracer, LuminEZ or High Intensity Bulbs?
@@KuryakynHoldingsLLC The best ones I can get for the rear... the fronts were already done when I got the bike...
@@61espo Non CAN bus models typically require a load equalizer. Check out P/N 2907 and 2908. 2907 has a smoke lens and 2908 has a red lens!
Rear Turn signals:
www.kuryakyn.com/products/6533/tracer-led-rear-turn-signal-conversions
Load Equalizer:
www.kuryakyn.com/products/6637/aluminum-load-equalizers
Will theses suit my new 2021 Low Rider S ???
Any of the 1157 bulbs, inserts or conversions will work in the front. And for the rear any of the 1156 options will work.
It's too bad the tracers won't work with the chrome trim rings.
Hey brother have a question just bought a new smoked led break light and smoked lenses for the front and rear turn signals I have a 2012 road king when I turn the ignition on my front signals come on automatically and act as running lights I guess you could say but my rear signals don’t come on as running lights they come on but only when I use the signals to turn they both work when I turn left/right or when I turn my hazards on but that’s it I know your video is a little old hoping I can get a reply back from you to answer my question but my question is are the rear turn signals supposed to come on like the front ones do when I turn the ignition on or they only there just for turn signals and hazards only I know I sound dumb and should probably know this answer but I didn’t pay attention before I would like to think that just adding the smoked lenses to the back didn’t cause that if it caused anything to happen or if it could maybe have happened when I put my new smoked led break light in again I know I’m a year late but any advice or input or any knowledge is better than not knowing if you don’t mind letting me know or if someone on here in the comments could let me id be very very much appreciated
So, what if I don't ride a Harley Davidson? Everything is marketed for HD, have difficulty if something will fit my Yamaha or not.
Swap Harley turn signals onto your Yamaha, thats what I did.
Please suggest me for Royal Enfield Meteor 350 turn signal. I want to place drl and turn signal in side indicator position.
Just went on their websites, these guys are sold out of everything
I have some led but they are smaller than the 1157 lights my size 1in an quarter can yall help me
SHUT UP AND TAKE MY MONEY!!!