Which wires go the the battery and which wires go to the accessory power from the relay? Mictuning has no wiring diagrams on their website and no support area other than just an email address.
please connect the black wire of the switch to the black wire(the negative) of the harness, then connect the red wire which wired pin 2 to the white wire(the positive) of the harness. These two wires are to control the rocker switch. The seond red wire （pin3 and pin6）of the swtich are connec to the red wire (go to the accessory power from the relay)of the harness. It is to control the light.
If you wire the harness to a battery directly, the rocker switch will glowing even when the vehicle is off. If you don’t want the switch always glowing after you turned off engine, you can hook the harness to a source on your fuse panel.
Hi, you could hook the harness to a source on your fuse panel or your car battery.If you wire the harness to a battery directly,the rocker switch will glowing even when the vehicle is off. If you don't want the switch always glowing after you turned off engine,you can hook the harness to a source on your fuse panel.
I put an ammeter on a 52" bar at 12 volts it was drawing 10 amps. This 22" will draw 4 amps. You're wasting time and money with a relay, as any switch should easily handle such a low current. In fact, I'm running the 52" bar with no relay and no problems.
It's annoying that the wiring harness doesn't account for an accessory circuit, so that the switch and light aren't always live. It really should have a second relay, or different relay.
The sound of the video is not working. Another individual also made this comment and you folks did not get the message YOUR VIDEO VOLUME IS NOT WORKING
I have a 13.5 Mictuning Led Light stop working period, I'm returning to Amazon. Light just stop working, theirs a defect in light it shelf.
Which wires go the the battery and which wires go to the accessory power from the relay? Mictuning has no wiring diagrams on their website and no support area other than just an email address.
please connect the black wire of the switch to the black wire(the negative) of the harness, then connect the red wire which wired pin 2 to the white wire(the positive) of the harness. These two wires are to control the rocker
switch.
The seond red wire （pin3 and pin6）of the swtich are connec to the red wire (go to the accessory power from the relay)of the harness. It is to control the light.
That was a 1:40 of my life I’ll never get back
i hate videos without sound, in case you're wondering why i disliked the video. Could have been so much better with sound.
I have done exactly this but the blue switch led stays on even when I turn the car off..!?!
If you wire the harness to a battery directly, the rocker switch will glowing even when the vehicle is off. If you don’t want the switch always glowing after you turned off engine, you can hook the harness to a source on your fuse panel.
Is it safe to power the whole relay from the fuse panel? Or are you talking about wiring just the switch power to the fuse?
Hi, you could hook the harness to a source on your fuse panel or your car battery.If you wire the harness to a battery directly,the rocker switch will glowing even when the vehicle is off.
If you don't want the switch always glowing after you turned off engine,you can hook the harness to a source on your fuse panel.
cheers buddy..
Smith Smith did you fix it? I want to do as the video says but I don't want it on all the the time lol.
ive connected and everything, but the bar isnt coming on
why is one of my rocker wires blue ? ihave black white and blue WTF
Overland Phil I have the same problem. Like wtf
I put an ammeter on a 52" bar at 12 volts it was drawing 10 amps. This 22" will draw 4 amps. You're wasting time and money with a relay, as any switch should easily handle such a low current. In fact, I'm running the 52" bar with no relay and no problems.
It's annoying that the wiring harness doesn't account for an accessory circuit, so that the switch and light aren't always live. It really should have a second relay, or different relay.
sorry to hear that, pls send me your order number here Annamictuning@gmail.com
No volume?
size from 3.5 inch to 52inch ,
Because they don't talk in the video, it's on purpose. They don't want it to have sound.. or maybe there was copyright music that was muted.
There is no sound.
The sound of the video is not working. Another individual also made this comment and you folks did not get the message YOUR VIDEO VOLUME IS NOT WORKING
Because they don't talk in the video, it's on purpose. They don't want it to have sound.. or maybe there was copyright music that was muted.
No sound... Disliked.