Good video, and good work! It is very easy to over-voltage these MPPT units which are rated at 100V, but can take over a 1000W input at 24V... I have seen this exact problem before; every Epever MPPT I have seen fail, failed at the MOSFETS or the 330uf 100V capacitors. Withe the FET failures I assume due to the panel exceeding VoC in our very cold Canadian weather when it's sunny out, and the MOSFETS going into avalanche, heating up, and dying. INFINEON IPP041N12N3GXKSA1 may be a better replacement with a 150V rating instead of 100V. I have not tested this but it should work. I would also replace the large 330uf capacitors with 150V or higher ones. Panasonic 330uf 160V EEU-EB2C331 is a better replacement for them which I have used many time successfully.
I really need to repair mppt charge controller but don't find any video on this topic, and here it is you did it so well god bless you❣️
Good video, and good work!
It is very easy to over-voltage these MPPT units which are rated at 100V, but can take over a 1000W input at 24V... I have seen this exact problem before; every Epever MPPT I have seen fail, failed at the MOSFETS or the 330uf 100V capacitors. Withe the FET failures I assume due to the panel exceeding VoC in our very cold Canadian weather when it's sunny out, and the MOSFETS going into avalanche, heating up, and dying.
INFINEON IPP041N12N3GXKSA1 may be a better replacement with a 150V rating instead of 100V. I have not tested this but it should work. I would also replace the large 330uf capacitors with 150V or higher ones. Panasonic 330uf 160V EEU-EB2C331 is a better replacement for them which I have used many time successfully.
Belle vidéo 👍👍et super avec les sous titres 👏👍👍
Watching sir, thank you for sharing
Very good information sir
TNX for sharing sir
Very nice 👍 video sir.
Good great best job thanks for sharing thanks more and more 👍🏾👍🏾👍🏾👍🏾👍🏾👍🏾👌🙏🙏🙏🙏🙏❤️
Great video.
Good job.
Thanks for Sharing
Very 👍 nice video like always, waiting for the next:)
Good job ...... thanks
Good information sir tank you
Gud job @Tevs
Nice job there bro, I have issues with yahoko mppt charge controller working but not charging battery
What could be the fault of yahoko mppt charge controller turns on but can't charge battery
Nice video ,👍🤳🛠️🧿🇹🇷
Something different and enjoyable as always! Many thanks Tevz.
Glad you enjoyed it
Nice sir
Good boy
complimenti, ti seguo sempre anche se non parlo bene la tua lingua , i Mosfet sono di potenza? tanks
👍
What is the part number of the diode?? I can’t see mine
How are you our senior tecnician am from kenya l have an lg 32 inch with a strip of I.5" from left to write how can it be removed
its may be the side COF, missing signal or voltage.
Hi mr tevz.i want to honest and ask you that is it so hard to turn on your soft ware to turn it on for showing the subtitle?!!!!!!
Its on now
Hi MrT. Do you have any antique tvs? I think worth a lot of money soon.
The next video hopully.
Do you have the circuit diagram and code ?
Sorry, no diagram
What do you think is the reason for the failure of the MPPT mosfets? Customer abuse?
The owner of this MPPT solar charge controller uses more than the maximum amount of solar panels, that's maybe the course of the failure.
@tevzTVTevatronics I thought as much. So how do you protect yourself if it comes back with blown mosfets again?
@@angelosanagnostou5550 Protect myself? for what?
@tevzTVTevatronics from customer saying that you did a bad repair in the mean time they are abusing the product.
@@tevzTVTevatronics Sometimes mosfets are blown when disconnecting battery first
Boss nasa ncr ka ba
norte
When I order parts from China I have to wait more than 100 days to receive it
I waited only 1 week.
@@tevzTVTevatronics our postal service is bankrupt.
What is that soldering iron tip…lol. Ali is next door and cost only few bucks
Lololololol
You need a propper desoldering station..