It's awesome that you opened the cockpit and even shined a flashlight inside! So annoying when reviewers fail to show the open cockpit if that's a feature in the kit they're reviewing.
May I ask what are the type of decals/transfers supplied with the kit, please? Wet, dry or stickers? I mean other than the obvious stickers (the gold/silver foil ones)
I suck at handling the tubing, the material gets frayed and the ends won’t stay in place without glue. The skirts are a pain to put back on when they fall off too, I’m considering glue for them. Everything else has been great though!
I am currently building the same kit. I find that the upper torso when its on frame mode easily detaches from the bottom half. Do you find it the same ?
@@zethythonix I would also like to know the answer to this please: "hand grenade" = when the kit starts to fall apart (joints loosening to the extent where the kit can no longer hold its pose readily, or when parts begin to randomly fall off the kit, etc)
@@notwithoutincidence Here is my answer, for the MK-II specifically, mine turned into a hand grenade just around 2-3 months after I built it, so technically I haven't touch it for a long time
I have this gunpla in my back log I’ve only built high grade like the Barbatos lupus Rex and the impulse strike freedom also the SD VERSION OF THE IMPULSE STRIKE FREEDOM finally the GUNDAM that hallelujah use the Dynamix I’m concerned about undertaking the real grade what advice you guys have
If you do find out please do points out where, I’m still new to Gunpla and wish to build this Gundam in rg as well as paint it to, my first hg was the mk-2 I loved it, but always felt it was missing something.
@@zethythonix oh yeah I forgot to tell you the freedom I was talking about is HGCE freedom custom but I never seen that one in my entire life is it rare?
Oh you mean the Build Fighters custom? There is one at BF where the custom set is plain white and you need to repaint the whole thing, it came with a magazine if I remember correctly. That Freedom is Freedom Honoo, from Build Fighters Honoo manga.
Very helpful, this looks like a great build, however, I am torn between this and the RG No.09 Justice Gundam (SEED). Slightly dismayed by the wires, I don't feel comfortable cutting them :( (PS Enjoy an extra like and subscribe!)
@@nmarvlonam9908 Early RG will have this problem, so there isn't anything we can do, we can only stored them and put them in the shelf and never touch it...
and that's your opinion which is absolutely wrong if you are capable of doing the necessary work, this kit is going to be one of the nicest RGs around just like the RG Aile Strike or the GP01(FB) (the RX-78-2 and the Zaku IIs are hopeless, THOSE are the worst ones around)
It's awesome that you opened the cockpit and even shined a flashlight inside! So annoying when reviewers fail to show the open cockpit if that's a feature in the kit they're reviewing.
except it's pretty much a trivial thing about a real grade since it has nothing in it
i agree, i love seeing the cockpit because its make much realistic
Simple yet awesome. I love the color. This will be my next kit
Nice work, very straight forward and thorough review.
This is the only "older" RG Im planning on getting. From what I have heard this is the best of the old RGs that had prebuilt frame
Nice video and great commentary
Thank you bro!
May I ask what are the type of decals/transfers supplied with the kit, please? Wet, dry or stickers? I mean other than the obvious stickers (the gold/silver foil ones)
Silver foil stickers near the joints, overall body decals were normal stickers
I suck at handling the tubing, the material gets frayed and the ends won’t stay in place without glue. The skirts are a pain to put back on when they fall off too, I’m considering glue for them. Everything else has been great though!
im surprise i havent seen anyone customize headphones to look like the gundam vulcan pods
This is very helpful
great to hear it
I am currently building the same kit. I find that the upper torso when its on frame mode easily detaches from the bottom half. Do you find it the same ?
I don't, maybe it's your model's problem?
Did you use gundam marker to accentuate details on this model?
Panel Line Accent Color (Liquid)
Thanks, it looks amazing!
I have a question how long did it take for this gunpla to turn hand grenade (hope that make sense) nice review tho very helpful
Forgive me, I don't know wym by hand grenade...
@@zethythonix I would also like to know the answer to this please: "hand grenade" = when the kit starts to fall apart (joints loosening to the extent where the kit can no longer hold its pose readily, or when parts begin to randomly fall off the kit, etc)
@@notwithoutincidence Here is my answer, for the MK-II specifically, mine turned into a hand grenade just around 2-3 months after I built it, so technically I haven't touch it for a long time
@@zethythonix so I bought the kit and having trouble with the mid section any tips?
@@zeno7231 Can you be more specific, which mid section?
So this kit is kinda like da RG aile strike they both hav da same problem the waist is just sloppy
This is better than Aile Strike IMO, at least it can stand lol
Zethythonix yea that’s for sure
I have this gunpla in my back log I’ve only built high grade like the Barbatos lupus Rex and the impulse strike freedom also the SD VERSION OF THE IMPULSE STRIKE FREEDOM finally the GUNDAM that hallelujah use the Dynamix I’m concerned about undertaking the real grade what advice you guys have
Where’s everyone getting these with ball joints at the waist, mine has the stupid shot slot joint and it falls apart just by lifting?
Not sure...
If you do find out please do points out where, I’m still new to Gunpla and wish to build this Gundam in rg as well as paint it to, my first hg was the mk-2 I loved it, but always felt it was missing something.
ummm i think u accidentally cut the ball joints. maybe u mistook it for a nub???
@@gatomeong christ, that would be a HUGE fuckup.....
quick question:was it hard to cut the wire also are the measurements has been provided in the manual
I think measurement is included? But the wires are easy
My rg mk titans frame more sturdy than my rg strike freedom...
Hmmmmmmm... That's something new
@@zethythonix the shoulder joint of mk 2 is different from rg seed series
@@fidzhamsyafiq8532 Ofc
This or red frame one for poses
I will say red frame, easier to deal with the hands
@@zethythonix thanks bro, your videos are awesome and helped me a lot, and do this or red frame look cooler in part separation and on display
@@voltgaming2213 Both part separation were fine, posing will be Red frame better, display is always MK-II looks awesome.
Does the mark 2 come with a transforming core fighter?
No, this is neither GP01 or RX - 78, since the OG settings, MK - II don't have a core fighter, so it won't have one on a gunpla too
Biofan813 Why would it come with one?, it never had a core fighter liked the Rx 78-2 or the Gp01/FB.
Do you recommend getting the rg Mk ii titans ver, or the revive ver instead.
RG will be better, you just need to careful about the chest joint where it's pretty loose.
I have a progblem with the torso. Its either very small or its not fitting correctly Idk what to do.
That's weird, I don't have that problem, try to assemble it slowly and see if you missed small parts
Is this a recommendable rg from the early rg?
Yes
The left hand is kinda weak in my kit
Mine is the centre ball joint
do you have to put the tubes in
yes
Wait isn't this inner frame bad like GPO1?
Slightly better than GP01
@@zethythonix oh yeah I forgot to tell you the freedom I was talking about is HGCE freedom custom but I never seen that one in my entire life is it rare?
_KenjiTX1_ what do you mean?
@@zethythonix HGCE freedom gundam custom is it in CE or Build fighters?
Oh you mean the Build Fighters custom? There is one at BF where the custom set is plain white and you need to repaint the whole thing, it came with a magazine if I remember correctly. That Freedom is Freedom Honoo, from Build Fighters Honoo manga.
Is it stable? Thanks.
Torso is loose, but overall good
Very helpful, this looks like a great build, however, I am torn between this and the RG No.09 Justice Gundam (SEED).
Slightly dismayed by the wires, I don't feel comfortable cutting them :(
(PS Enjoy an extra like and subscribe!)
For the wires part, just get a ruler and you will be fine. It's not that difficult.
@@zethythonix Thanks! Didn't think I would get a reply! Actually found a RG Banshee at an 'affordable' price that I hope to buy!
@@binkus.bonkus.2737 That's good for you!
Is it me or your video is like lost focus a lot!
Good review tho!!
This video is my early YT days, so I am not familar with recording and stuff, it's bad I know, but I improved now
wen video loji klo
U know
is it sill good ???
No. The torso and waist became more loose
It aged really badly for me, it can't even hold the weapons anymore 😭😭
@@nmarvlonam9908 Early RG will have this problem, so there isn't anything we can do, we can only stored them and put them in the shelf and never touch it...
They call me a madman for planning to by this. Wish me luck as a go Satan's hole, but not that hole.
Correction: As I go
I don’t understand what you say
This is one of the worst gunpla kits I have ever bought really disappointed
Then I assume you didn't try the GP01 then... That was a nightmare compare to this lol
Not solid? Hand grenade?
@@dblaze889 when you first build it the kit is solid
But give it couple of months and it will turn to a hand grenade
Try HG tristan lol
and that's your opinion
which is absolutely wrong
if you are capable of doing the necessary work, this kit is going to be one of the nicest RGs around
just like the RG Aile Strike or the GP01(FB)
(the RX-78-2 and the Zaku IIs are hopeless, THOSE are the worst ones around)