It helps reduce visibility of the overlaps where the surface cleaner goes over the same spots twice. Something I meant to touch on in the vid.. Hard to remember every detail when recording lol
I’m late to this video I just been going down the rabb it hole this week and found you. Best channel I found so far. Question is PATIOS, I live in North Jersey. We have pavement driveways and paver patios, NO CONCRETE !! Can u treat paver patio block with DH ? What’s the best route to take ?
Wow looks great. Glad you explained sidewalk. The builder/company really should have included the sidewalk since it looks so bad now and it was their fault they had to get you to clean it in the first place.
@@RaymondNotario 😂 Random, but I realized you are in Belmont area... I used to go there and Gastonia all the time when I lived & worked near CLT airport 2016-2019. Small world! Live in Spartanburg SC area now.
Great video Ray 👍 Most driveways that I do, I'll start by pre-rinsing all the expansion joints out and getting all the existing dirt off. It really depends on the condition of the driveway though.. I just picked up 10 gallons of Gold Assassin and I can't wait to see how it works with cold water. Keep hustlin' broski! 😎👍
Ray, the part about 4" per 1 gallon per minute for your machine is a myth, I run two 28" Big Guys on a 8 gpm machine all the time with no issue at all, yes we go just a little bit slower but in my opinion it cleans better. But I do run 100ft of 1/2" line per hose reel with 200ft of 3/8" hose after the 1/2". That way we can reach out 300ft per side of the trailer and get it done! Great information you are putting out, keep it up!
The job look awesome but as a guy in the same business, it's always good to throw in a little extra time and effort (the walk way) to gain a loyal customer even if it wasn't in the negotiating
The builder got oil on the driveway while working on the property, I told her I would do the walk way free of charge and she asked me specifically not to do any thing other than the driveway. She was upset that they had to come out of pocket over a small oil stain. It's hard for me to morally not do what the person paying me for the job asks. It did get my ocd going to leave it though LOL
Ayee Ray bringing that fire 🔥 saw you on the wash a thon vid and live on the NBZ with Bobby! Can’t wait to see the flatbed! Keeping killing bro NC in the house
Great video content Ray. Just staring out. I noticed you went side to side from the bottomnup that driveway with the surface cleaner. Any reason not to do long passes? Thank you
So when you make passes with the surface cleaner it is very hard not to go overlap a couple inches over a spot that has already been cleaned. This causes "lines" sometimes. The side to side method makes this much less noticeable
Do you run the line off the unloader so it does not go back to the pump if you don’t spray for awhile so it don’t burn off the pump. Great vid helped me a lot.
Hi Ray is that a 1/2 hp Leader Pump ,how do you like it for soft wash, can you shoot a roof top. I use an ar 45 /honda. looks like it will do the same job as the ar except 1/3 of the cost of the ar which works for me .I use a gravity fed low 50 gallon batch system on a 2" feed line from the tote. and the same tank overhead for bleach on a gravity fed 1" line. 3 minute refill time and gives me an exact mix I use it for down streaming as well on my other pump....yes its old school .it saves the equipment .I never comment ..or read comments. .and yes I have a metering system ... I just like the process. I like your style Ray....keep up the good work
Thank you so much for sharing I was wanting to know why or the purpose of power washing perpendicular on the driveway instead of just going up and down the length of driveway??? Thank You
It helps reduce visibility of the overlaps where the surface cleaner goes over the same spots twice. Something I meant to touch on in the vid.. Hard to remember every detail when recording lol.
Hello, Sir. I did my first two jobs yesterday. It is hard work! Question - some of my QC's are already becoming a PIA connecting/disconnecting. What type of lube would you recommend for them?
I don't know of any lube that helps, but if you get a good stainless steel quick connect it may help your situation. Spend a few extra bucks on better quality and it will be worth it in the long run
Great video. I’m new to learning about pressure washing. So you use the soft wash system to pretreat? If I were to start a pressure cleaning company one day without all of the soft wash equipment, what’s the next most efficient way to pretreat?
Great video! I learned a lot. I do have a question though. I’m still learning and practicing on my property. I didn’t use any chemicals and just ran the surface cleaner with water. After everything dried up I noticed lines. Am I still able to post treat it even though it’s been a few days?
As far as a water source do you use the customers water or carry a large tub of water trying to help my son get his own side hustle together but having to learn myself to help him
New subscriber here. Great Video Ray!! Please help me!!! When you say your bringing your SH from 12 to 2-3% how in the hell do you calculate that?? Please forgive my ignorance
Hey Ray, love your educational videos, great job, just a quick question. What kind of softwash system do you use with your car remote control is so crazy I love it, and what do you think about the air pressure softwash system? Good day.
Thanks brother. This is one I bought awhile back. I am actually not very happy with the Leader pump, this is my 3rd one this year and I won't be using it after my new rig is finished. Moving on to another setup that i'll make a vid on when it's done
Hey Raymond, thank you for all the useful information. Do have any recommendation on handling the white oxidation from brick houses, because I really can’t find any information on making the bricks look clean. I would really appreciate if you can give me a tip or links to getting rid of the white look on the bricks. Thank you very much I appreciate your time and help.
Yes I do. I would try either nmd80 or Onerestore. There is also a chem called white scum remover. I think the white on brick you are referring to is called efflorescence
I have a question. What do you do with the wastewater when cleaning concrete driveways? Do you let it run off in storm drain or do you pick it up and prevent it from going into drain?
Always check with your local municipality because the rules can vary from place to place. Good practice to rinse off as much as possible into the customers yard. If it runs straight down and into a drain, you can use a sand snake and a 12v sump pump to transfer the runoff back into the yard.
@@RaymondNotarioisnt it bad rinsing pre treatment into grass? Sorry lol pre treatment and chemicals is the only thing holding me back from starting up pressure washing
Ray, Great tutorial, as usual Sir! Here in NJ, weather and security always a concern, want your thoughts-- Growing from 8ft truck bed to a new trailer build next season--would you look at open or Enclosed trailers if your were in my shoes? Rich
Given that you are concerned about theft and the cold, i'd def steer more towards a box truck. If I were to go that route i'd try to cut in some roll up door on the passenger side to work out of and so the equipment gets displayed to the customer.
Have you tried plugging opposite holes on the bar to see if it cleans different? I'm thinking that having them offset might help to feather out any lines. If mine had 4 holes I'd try it.
Da cleanest driveway in the hood!!
lol
instablaster
By far the best pressure washing instruction video. No mindless chatter strictly facts from experience! Explains what and why... The video is gold..
Thanks Paul
Wow! I am amazed by how detailed you are with the way you explained things and with the quality of your work. ❤
Best walk through video I’ve seen yet!
For someone who hasn't been doing this very long, you sure have come a long way. Good shit bro and I wish you continued success.
Thanks brother, back at ya!
Good teaching looking from Trinidad 🇹🇹
Thank you, that is very cool 💦💎
Invaluable content. Thanks for sharing your knowledge.
That trailer setup 👌🏻
Thank you for going over the surface cleaner tip sizes! Great tip!
Another awesome in depth video! You are a natural in front of the camera! Thanks for sharing!
I appreciate the kind words John!
plan our work and work our plan. best washing advice
Yessir !
Awesome pressure washing video😊!!!!!!!!
An excellent result, and so very well explained on every part of the job. I hope you get many good referrals. Take care 👍
Thanks Steve
Best channel in the game!!🤘
I appreciate you bro!
Good Stuff Raymond. Keep it up.
Much appreciated
You are a Good teacher brotha. Great vid
I appreciate that
Great video Ray. Glad to see you back sharing your knowledge.
I got a little busy there for a minute lol
Great tutorial video Thanks 🙏
Hey Ray, have you ever had a problem with epa or city official's questioning you about chemical runoff?
Great video! I want to do my driveway now. 🙂
Thanks man... Im looking to start a business in my town. You videos really help me alot!
Glad to hear it! Best of luck on your journey!
Great content Ray! Nice meeting you at washathon! Keep up the awesome work!
Likewise Luke!
Thanks for all the clear detailed instructions!! What do you use for a degreaser?
thanks brother ! awesome video
great video Ray as always
Thanks brother
Great video!
Great content Ray. Also, enjoyed JNE podcast. Keep "Shinin' like a Diamond"
Thanks brother, back at ya!
Any recommendations on a Tile roof soft wash with pigeon poo?
Great video man. I run a powerwashing and lawn care business here in st Charles MO and for my first year really advertising it was a good year
Good luck!
Nice explanation
Thanks bro
Great job and great advice.
Thank's. 🏴🇬🇧👌
Thank you John!
Awesome job bro love your “Style” of editing. And Tutorial was very Informative 💯🔥 thank you brother !
Great job
Awesome video! Great job as well!
Solid video bro,I gat you...subscribed
Cool video. Just getting into powerwashing. I got a power line i bought used. I need a soft wash pump next.
Nice 👍
Great videos Ray! I enjoy them! 💎
Thanks David
Nice job Ray! Keep on gettin it bro!
Thanks brother! Back at ya!
Awesome work bro!! 👍🏼
Thanks Ralda!
Thanks for sharing, keep these vids coming, I’m learning a lot from you as I start my new business.
You're welcome bro Good luck!~!
Hows business been so far? I just started literally 2 weeks ago and struggling a bit 😖
Great video, excellent information, so when you used the surface cleaner did you use any chemicals when cleaning or was it straight water.
And really neat how you go about the driveway instead of lengthways because of hose management I suppose.
It helps reduce visibility of the overlaps where the surface cleaner goes over the same spots twice. Something I meant to touch on in the vid.. Hard to remember every detail when recording lol
Very very informative, thankyou.
Absolutely love videos like this
Ray, a great video brother!! The job was well done as well brother!!!!
Thank you !
Nice job 💪🏾🙏🏾
Thanks 💯
Great video man, I wasn’t sure on what solution to use for pretreatment! Very informative video!
Good to see you making a video. Good stuff!
Thanks bro, I got a little busy this summer and had to dial back lol
true about the tips, I will have to check mine and replace as needed. I'm going to get SDS sheets. Great videos and details!
Good idea, Thank you!
I’m late to this video I just been going down the rabb it hole this week and found you. Best channel I found so far. Question is PATIOS, I live in North Jersey. We have pavement driveways and paver patios, NO CONCRETE !! Can u treat paver patio block with DH ? What’s the best route to take ?
Thanks for the knowledge brother!!
You're welcome brotherman thanks for watching 👍
Great vid
Wow looks great. Glad you explained sidewalk. The builder/company really should have included the sidewalk since it looks so bad now and it was their fault they had to get you to clean it in the first place.
I told them I would throw it in and they actually asked me not to do it lol I think they were upset for having have it cleaned over the oil spots.
@@RaymondNotario 😂
Random, but I realized you are in Belmont area... I used to go there and Gastonia all the time when I lived & worked near CLT airport 2016-2019. Small world! Live in Spartanburg SC area now.
Love the videos ray keep it comin brother
Thanks brotherman 👍
Great video Ray 👍
Most driveways that I do, I'll start by pre-rinsing all the expansion joints out and getting all the existing dirt off. It really depends on the condition of the driveway though..
I just picked up 10 gallons of Gold Assassin and I can't wait to see how it works with cold water.
Keep hustlin' broski! 😎👍
Let me know how it works for ya!
Ray, the part about 4" per 1 gallon per minute for your machine is a myth, I run two 28" Big Guys on a 8 gpm machine all the time with no issue at all, yes we go just a little bit slower but in my opinion it cleans better. But I do run 100ft of 1/2" line per hose reel with 200ft of 3/8" hose after the 1/2". That way we can reach out 300ft per side of the trailer and get it done! Great information you are putting out, keep it up!
Good info right there... Keep shining!
Take off flying like a UFO cracked me up!!!
lol when I first started I was putting weights on it to hold it down
The job look awesome but as a guy in the same business, it's always good to throw in a little extra time and effort (the walk way) to gain a loyal customer even if it wasn't in the negotiating
The builder got oil on the driveway while working on the property, I told her I would do the walk way free of charge and she asked me specifically not to do any thing other than the driveway. She was upset that they had to come out of pocket over a small oil stain. It's hard for me to morally not do what the person paying me for the job asks. It did get my ocd going to leave it though LOL
I was curious as why the walkway wasn't done either.
Good good video amigo good job 👏
Gracias my brother
How can contact with you
You have done an excellent job and very knowledgeable and informational. But regardless you should have done the side walk as well.
Ayee Ray bringing that fire 🔥 saw you on the wash a thon vid and live on the NBZ with Bobby! Can’t wait to see the flatbed! Keeping killing bro NC in the house
Thanks brotherman, yessir!
Great video, a lot more professional than others
Nice !
Great video 👍
Great video content Ray. Just staring out. I noticed you went side to side from the bottomnup that driveway with the surface cleaner. Any reason not to do long passes?
Thank you
So when you make passes with the surface cleaner it is very hard not to go overlap a couple inches over a spot that has already been cleaned. This causes "lines" sometimes. The side to side method makes this much less noticeable
Thanks Ray
Very good explanations. Do you have links where to order the degreaser? Thanks, Tom
Love your setup Ray.
Just curious about how you keep an open trailer setup covered when it rains, or during the winter months and hard freezes???
I draw antifreeze into all my pumps, hoses and reels then recycle it the following morning
Do you run the line off the unloader so it does not go back to the pump if you don’t spray for awhile so it don’t burn off the pump. Great vid helped me a lot.
i must ask what did you charge for a single but long driveway like that ?
Love all the videos, would you know how to get spilled diesel fuel off a vinyl fence? Any feedback is appreciated
Hi Ray is that a 1/2 hp Leader Pump ,how do you like it for soft wash, can you shoot a roof top. I use an ar 45 /honda. looks like it will do the same job as the ar except 1/3 of the cost of the ar which works for me .I use a gravity fed low 50 gallon batch system on a 2" feed line from the tote. and the same tank overhead for bleach on a gravity fed 1" line. 3 minute refill time and gives me an exact mix I use it for down streaming as well on my other pump....yes its old school .it saves the equipment .I never comment ..or read comments. .and yes I have a metering system ... I just like the process. I like your style Ray....keep up the good work
Great job Raymond! Where can I get a goat wrench ? Thanks
Enjoy the content bro!
Appreciate it
What size is your trailer? Watching your videos has helped me a lot. Thanks.
Glad to hear it Jason, it's a 12x8
Great video Question I only can get 10percent sh what mix would you use
That depends on what system you're using. For downstream start with 50/50 and go up from there.
Thank you so much for sharing I was wanting to know why or the purpose of power washing perpendicular on the driveway instead of just going up and down the length of driveway??? Thank You
It helps reduce visibility of the overlaps where the surface cleaner goes over the same spots twice. Something I meant to touch on in the vid.. Hard to remember every detail when recording lol.
Have you always used the generator for the soft wash? What’s the advantage vs battery? Thanks for the videos!!
I have since going to the booster. I'm going to have a battery bank and inverter on the new flatbed rig
Hello, Sir. I did my first two jobs yesterday. It is hard work! Question - some of my QC's are already becoming a PIA connecting/disconnecting. What type of lube would you recommend for them?
I don't know of any lube that helps, but if you get a good stainless steel quick connect it may help your situation. Spend a few extra bucks on better quality and it will be worth it in the long run
Great video. I’m new to learning about pressure washing. So you use the soft wash system to pretreat? If I were to start a pressure cleaning company one day without all of the soft wash equipment, what’s the next most efficient way to pretreat?
Great video! I learned a lot. I do have a question though. I’m still learning and practicing on my property. I didn’t use any chemicals and just ran the surface cleaner with water. After everything dried up I noticed lines. Am I still able to post treat it even though it’s been a few days?
Thanks man it wouldnt hurt to try id bet it would remove the lines
Where and what brand do you buy your pump up sprayers?
So, how do you manage the water that collects at the end of the driveway?
Thank you for this awesome video! Where would i be able to get these SDS sheets you mentioned?
By law the supplier has to have them available. Some mail them with the product others you'll need to get through email or online.
@@RaymondNotario Ok thanks!
As far as a water source do you use the customers water or carry a large tub of water trying to help my son get his own side hustle together but having to learn myself to help him
New subscriber here. Great Video Ray!! Please help me!!! When you say your bringing your SH from 12 to 2-3% how in the hell do you calculate that?? Please forgive my ignorance
10% SH mixed 1/2 SH to 1/2 H20 becomes 6% SH and so on and so forth. Hope that helps.
Hey Ray, love your educational videos, great job, just a quick question.
What kind of softwash system do you use with your car remote control is so crazy I love it, and what do you think about the air pressure softwash system?
Good day.
Thanks brother. This is one I bought awhile back. I am actually not very happy with the Leader pump, this is my 3rd one this year and I won't be using it after my new rig is finished. Moving on to another setup that i'll make a vid on when it's done
Good work
Whats the best chem for tire shine removal from driveways?
Think I found my answer. Chaulk remover
Yep you nailed it. I think goof off makes the one that has worked for me in the past.
Hey Raymond, thank you for all the useful information. Do have any recommendation on handling the white oxidation from brick houses, because I really can’t find any information on making the bricks look clean. I would really appreciate if you can give me a tip or links to getting rid of the white look on the bricks. Thank you very much I appreciate your time and help.
Yes I do. I would try either nmd80 or Onerestore. There is also a chem called white scum remover. I think the white on brick you are referring to is called efflorescence
Hey Boss, good job...
What kind of pump and chemical mixer you use?
Have a great day
Hi dear , what products you recommend for black stains, fungus and mold?
I would suggest sodium hypoclorite mixed with a little surfactant and water applied through a power washer for efficiency
I have a question. What do you do with the wastewater when cleaning concrete driveways? Do you let it run off in storm drain or do you pick it up and prevent it from going into drain?
Hey ray I’m looking into this business for next year can you make a video about why you like a booster pump vs 12v ?
I'll try to add that in my next vid!
@@RaymondNotario that would be awesome !! I’ll keep an eye out for it .
Thanks
abt to buy a 4 gpm 4400 psi and a 20" surf cleaner........what tips do you suggest i use?
what chemicals did you use? and what was the percentage?
Ray, Local NC guy here. Do you have any recommendations on breaking into the post construction market? Thanks.
Does the clean water act affect what dirty water goes off the property to a drain?
Always check with your local municipality because the rules can vary from place to place. Good practice to rinse off as much as possible into the customers yard. If it runs straight down and into a drain, you can use a sand snake and a 12v sump pump to transfer the runoff back into the yard.
@@RaymondNotarioisnt it bad rinsing pre treatment into grass? Sorry lol pre treatment and chemicals is the only thing holding me back from starting up pressure washing
I just saw you on that interview with Bobby
The NBZ haha
Ray, Great tutorial, as usual Sir! Here in NJ, weather and security always a concern, want your thoughts-- Growing from 8ft truck bed to a new trailer build next season--would you look at open or Enclosed trailers if your were in my shoes? Rich
Given that you are concerned about theft and the cold, i'd def steer more towards a box truck. If I were to go that route i'd try to cut in some roll up door on the passenger side to work out of and so the equipment gets displayed to the customer.
@@RaymondNotario Thanks Ray....good suggestion...
Have you tried plugging opposite holes on the bar to see if it cleans different? I'm thinking that having them offset might help to feather out any lines. If mine had 4 holes I'd try it.
No I haven't tried that, but i've heard of people putting different degree tips in the other 2 holes.
Great bideo
Any potential issues/danger applying hot stain remover on top of sh (pre treatment) ? How about rust remover like OX Brite on top of pretreatment ?
Hey Ray, just wondering if you are still using that unger for windows?