1050 goes Protilling!
Вставка
- Опубліковано 11 вер 2024
- ** Well guys, let's go do one of my favourite jobs on the farm, and that is some recreational tillage!
** I sprayed out some seeded down grass/alfalfa (been seeded for 10+years) over the course of the summer, and now rolling in with Protill to break it up and prepare it to plant for the 2021 season.
** I have enough videos uploaded to UA-cam to keep us going for next couple weeks haha, so if you are interested in staying a little more up to date, than check me out on Patreon, as that's what I use for my social media account 🙂
www.patreon.co...
THANKS GUYS, YOU'RE AWESOME! 🙂
I'm a welder, and no matter how good of a job you did, no matter how much material you use, some idiot can always break it.
Can't wait to see the 1167 Vario MT taking on some hills with a fully loaded drill next season 😀👍
Agreed👌🏻
Me too me too ✋
@@dahlmasen3084❤❤❤❤❤❤❤❤❤❤❤❤❤😅😊😅0❤❤ ko
Usually you can turn on the ignition to let the fuel pump run for a while. Sounds like it had no fuel because of sitting for so long
I'm not a farmer have never been a farmer am fully retired ex trucker but I enjoy your explanation of everything your doing enjoy watching your machines work also how you take care of your equipment because of your farm equipment I recently climbed into a John Deere tractor just relieve an itch you created in me to see what you do and how they work
You can set a minimum rpm (and when the tractor should hold it, f.e. PTO, hydraulic, or driving) in the Terminal via the tms menü. That could avoid the second, until tms knows that it needs Power.
Hey there Mike. For your issue with the TMS. I Ran a Lot of tillage with a 933 Fendt in Ontario. I Set the rise and lowering of the implement on the Stop and Go. I then programmed the rpm memory to engage with the lowering of the implement and disabled it five or ten Seconds after that. This way the tractor never lowed down or dropped the rpm after turning around on the headland
Reading comments is like sitting in a class room full of young kids that watch a show but, do not listen to the words being spoken.
Thank you for taking us along for the ride and giving us a look at how the tractor and disc work.
👍👍
You bet they ask questions mike talked about in the video
I could watch that all day. Love tilling. Thsnks Mike
Thanks John! It's sure fun 🙂
2 more videos of tilling to come
That Tractor is Mean Looking with the Duals on it. I love Fendt Tractors.
Yes but they are not produced in the us so far i know
Looks better with the triples.
the shaking is not that bad, I would still prefer the wide angle videos
+1
Totally!
Mike as others have pointed out you can set minimum engine RPM in the settings so TMS doesn't almost kill it.
I always forget that! 😂🤦
You can also set it so that it revs up as soon as you press a hydraulic-button
Still can't believe how quite that cab is, truly amazing.
Watching this reminds me how much I miss driving a tractor.
Love fendt 1050.
Why does everything look so much more serious/badass with duals on?
Simply because it’s got duals on it.
Most definitely! Duals make a tractor look monstrous! Even if there skinny duals!
look at the trippels xD
Something so satisfying about tilling under that kochia weed.
the wide angle is sick, should keep going with it
Also the wind warning makes the wind noises a much more enjoyable part of the video.
The usual rule of thumb that is used here in Australia for something like that is ten horsepower per Tyne foot . This is based on experience with soil types and also the Nebraska tests from years ago. With this being the case and all things being equal, you would only be able to use a fifty foot sowing rig especially if your using pro and hydraulics to drive thinks. You could try getting it repowered on farm to to the tune of 25%-30% there are mobs over there that do that. Even if you bought a case or stiegers tractor on tracts or law wide tyres of a similar power you might not gain much as you would expect
@@kevinklingner3098 I believe ya responded to the wrong guy!
AMAZING !! Looks like a MARS base actually!
Seems fun ! A young team of farmers turning the World green, yaaay
I would guess that many people didn't fallow the "float" warning, because that pro-till is a mess.
Exactly what I was thinking.
"Look Andy" points "Idiots everywhere! "
;-)
I always watch you video's on tv after we are done working,and the quality is good 👌🏼still love the 1050💪🏼greatings from the Netherlands 🇳🇱
the wider the angle the less stability you need... looks fine
The 1050 is made for pulling large slurry tankers and big balers in Europe. It does that better than a quad trac would.
My Dad taught me to return something in better shape than I got it, good luck with that one! Sad how equipment gets abused.
extremly interesting takes and honest constructive criticism. living in the state where fendt was founded i see many farmers are firm believers in its technology. its very refreshing to see the difficulties the fendt runs into in your kinds of lands pulling these kinds of devices
Fendt was founded in germany and agco from Georgia just bought it 1997
@@lorkie2332 yeah i mean im from bavaria
Thanks, Mike. Appreciate your insite and candor about all you do. Really interesting to watch and hear what you say. Thanks for sharing and please, keep them coming.
Hi mike,
That rental unit is a real shame, sad to see such neglect on an expensive tillage unit... Those Pro Tills are built very strong, I was very surprised to see the damage to the frames..
Stay safe..
man, that Fendt 1050, i wished i have the money to buy one... 😔 it will be a dream for ever...
That looks and sounds so therapeutic 😌
You should have a hockey game against the Hunter Brothers.
1050 is a awesome machine.
You vids are never to long. Liking the wide angle 👍👍
Get a milwaukee grease gun. It puts out 13000 PSI+. Yes that's the right number of zeroes. One of the best purchases I've ever made. It will literally push solid dried grease out. You'd think you put a bar on the grease gun =P
I have one named Sally 😂😁
🎵Let it snow🎵
Let it snow
Let it snow.....
I like the experience. The camera man is not too much in the way (like other farmer channels ;)) and it is like you are yourselves in the tractor and driving it. I love it. Greetings from Netherlands
Like the way you describe and explain how the different Tractors / Combines ride, sound, pulling power etc...there strengths and weaknesses .
That pro till make a fabulous job off all that trash, great tool, again fab video and as always well explained. Thanks for taking the time to share Mike.
One thing to consider too is a track tractor will utilize the horsepower more efficiently due to slippage gain thus why they say a track machine will out pull a tractor with 100 more horse power and be more efficient so yea same horse power per shank but less power to the ground per shank
Degelman build idiot proof machines, only to be faced with newer improved idiots....the struggle is real folks lol
Ha! 🤣 Right?!
@@mikemitchell2554 have you looked at the Fendt 1100 series? 1162 or 1167? Keep up the good work with the videos!! 💪🏻
Good thing you took video of that Pro-Till, I'd hate for them to try and blame you if it had fallen apart.
And for anyone who complains about or think Mike's videos are too long, there's this crazy new invention that just came out called a pause button. You'll find it on the lower left corner of the video screen and it looks like this... II ...If you click on it the craziest thing happens, the video pauses. And here's the best part.... and this'll blow your mind... you can pause the video at any time and come back to watch more later!!! I know.. MIND BLOWN!!
Ha! 😂 That's awesome!
Great video as always. I worked at a coop and my job was to check the equipment as it was coming back in, clean, grease, and repair as needed. Keep me busy but the equipment hardly ever broke down in the field. Surprise they don't maintain the equipment better.
Mike your channel is my favorite so informative and enjoyable but your 1050 is definitely my favorite piece of equipment so I’m praying you keep it
Mike if you run it in stick mode and you want to dtop it back in the ground, just tap the pedal a little. Tapping the pedal increases the engine rpm without increasing the ground speed in stick mode.
Versatile should send a 610 Delta Track to up against the Deeres in the spring
Oh man... I and many others have mentioned this, but Mike has no interest in the Delta Track for some reason. He says it’s the Cummins he doesn’t like but I think there’s more too it than he’s letting on. I really don’t understand why the Versatile brand isn’t more popular in the country they’re made in 🤔
@@musikmaan yeah that dosent make sense cause I thought the 9r runs on the same cummins qsx15 that the versatiles do, the difference is the transmission and track system because the versatile has cat transmission and it has a different track setup without the "gearbox" to the drive sprocket
@@strykerk992 ya... I agree... he’s mentioned it in one of his Q&A videos... he’s not a fan of the Cummins in the Deere either, but admits the software could be different in the Versatile. I’m not a farmer, and really have not idea on either, but I have operated a good amount of heavy equipment, as well as done a lot of research on tractors and I truly believe the Delta Track is probably a superior machine, and Versatile should really drop one off at Mikes place for him to fall in love with.
Man what a beautiful landscape @11:12 !!!
I like it without the stability control. Makes me feel like I'm riding in the cab with u
Good morning Mike.. Thank you for the ride along... Wonderful land management on your part... Have a marvelous Monday ❤️❤️
Get a demo Fendt 1167 MT Vario really would like to see how that beast pulls
But as you say it may be rough rider
As long as they stick with that Vario transmission they wouldn't pull the skin off a rice pudding.
@@interman7715 🤣🤣true vario pulls mouch worse based on the engine power
Don't the Mt fendt tractors have that new suspension on the tracks or is that just the 900mt fendts
Wide angle is all good Mikey! I prefer being able to see more.
Awesome Mike
I could do that all day. It reminds me of the time I spent on the sea - that endless sky and only going as fast as conditions permit. Imagine one would get used to it, but I like to think not. Anyway the video wasn’t too long for me! Thank you!
Thanks Mike nice see you working on the land .it was doing a great job .yr got good soil .
Very typical for rental machines, "We dont do maintanence until they break down", and then is very cheap to do..., yeah.
Mike you're awesome, you even maintenance the rental machines !!! :)
We deleted our 927 and our 714 . Makes a big difference. And you can set your tms so it will not bog down as much on head land .you can set a minimum tms rpm
I could watch you Protilling all day. It makes such a good job Mike.
That's a smart fuel system Mike. Takes all the concern out of employees wanting fringe benefits. Frustrating for employers. Great explanation on the hp per shank, makes sense. I can see why that 1050 may be going down the road. I wouldn't want to be the local CO-OP manager when their upper management watches this video and sees what shape their equipment is in. No excuse for that, put down your coffee cup and do what you are being paid for! Good on you Mike for documenting it. TOG out!!
There is money to be made by renting out equipment . I can explain how but that´s for a different kind of platform than YT . Co-op equipment is most of the time beat up . The fact that I have a job fixing machinery all over the place and that our company is profitable every year is proof of that . When done the right way , rent , lease , financing , ect is very well doable . As for the 1050 , I did a few remaps this year ( yes the tractors are owned by our company and no AGCO warranty or permission needed ) and had good results . We also tested the 1100 series and I must say that the 1156 was impressive . Maybe not your choice but like us , you don´t care about the paint . You care about performance and durability .
im REALLY curious, if you had to guess (unless you have the actual test results)
how much power does the 1156 put down?
was it more or less then lets say a 9560RT?
Sad to see that protill being mistreated and not maintained. Spending 5 minutes a day greasing that machine probably would extend its life by 50 percent or more . Rental units get abused and don't last . That 1050 is a nice tractor we ran one as a demo on a Grain cart last fall . Here in southern Michigan we really don't see to many fendt or challenger tractors . I prefer our case and Deere machines but I keep an open mind due to rapid improvements in machine design in all brands . Nice video stay safe and farm on my friends !
ic the C.P. is storing more tank cars up there too. btw that looks like way to much fun! i am jealous!
Yes sir!.. Haha and thanks!
You are awesome taking care of equipmeant is a must so much to spare there.
Perhaps some day theese tractors will also have PH test probes & spectrographic scanners, measuring documenting the emissions and mineral values ... vitality of the ground environment and plants
Maybe 360 cam on top and deployable mini quas drones or Geostationary Satelite topview oversight
transmission on a display
I'm not a farmer, I'm a city guy. But I'm wondering when you hook up to equipment that uses hydraulics, like the one you got from their co-op. when you operate the hydraulics, does the hydraulic fluid that's in or used on the implement, mix with the hydraulic oil that's in your tractor? Thus it all becomes one big soup? And could that not be bad if the last operator of the implement or tractor, doesn't maintain their fluid and filters properly? I mean you could pass on trouble to someone else is my point. ?
Thanks for takin me along for some tillage in the fancy Fendt, Mike. Much appreciated! Keep em comin. And nah, NOT too long....
Keep the wide angle shots. Video isn't to shaky at all. Good quality. I really didn't notice a difference between the wide angle without stability as I did in the normal shots with stability on. It is still great quality
Totally found this 1050 unit for sale. Dare to say I can't afford to buy it at $449,226. Love the content Mike. Keep on being awesome.
Give you a deal 😉
I prefer the stability control shots, motion sickness gets to me so thank you for realizing that can happen. The wide angle isn't terrible though
Seeing a lot more Fendts here in Ontario. I think Agco is going to take a lot of the Deere/CNH market in the next decade. We’re going that way forsure.
@Dry Creek Cattle Co I can second that. We're pushing 350 miles to the nearest dealer and they refuse to stock much besides cat and claas parts.
Agco's solution is having them run a service truck once a week and having a drop box at the bobcat dealer...
We're pretty IH red here, used to be pretty Silver for combines, but just about everything is red now.
When you put the ignition on, count 5 seconds and you wont get that NONE starting problem.
Before cranking that is.
And another thing! Mike, why was your protill repaired during harvest?? You need a Agricultural Engineer lol.
fendt is the best! great vid
Yup, i like the wide angle too! Don't need it all the time, but it's really nice for in cab views!
Deere 9620rx 620hp + 8% boost 669.6hp/84= 7.97 hp per shank.
Fendt 1050, 517hp+0 boost= 517/68= 7.6hp per shank.
Thanks!
Something similar for the Case IH Quadtrack, that show:
Advertised Engine Power, Rated, hp (kW) 620 (462)
Maximum Engine Power, hp (kW) 682 (509), with Power Boost of hp (kW) 62 (46), leaving with similar HP / shank.
Look forward what the Fendt 1167 Vario MT with 495 (kW), 673 hp can do in future.
Or just use on the Fendt Ideals 9 or even better the 10, to do a good pull 😎😉
@@corgraveland4874 Yes and then read fine print about torque limited ranges in the Nebraska test reports. I will say that sometimes different manufactures seem to get more power to the ground than others with the same rating under the hood.
Great video Mike awesome job the pro till does
That Fendt is my favorite tractor :) nice work
How come you guys don’t shed equipment? Hard to comprehend leaving all that brand new gear in the weather when your from Australian where we shed everything as much as possible.
I'm pretty sure he explain why they didn't bother building a shed for them equipment. I think he said the money they going to spend for the shed can buy more multiple bins or something like that.
Hi from Australia . That protilla speed disc are doing a excellent job.
Fendt, the Mercedes of the tractor world 😀
True that!
Unnecessarily complicated and worthless after 30 years?
Just looking at all the old Mercedes cars up on farm auctions
@@J-1410 I’ve owned a lot of old Mercedes, and after 30 years they are still going strong and are as comfortable as they were when they were new👌🏻
@@dahlmasen3084 as I stated before, as I've seen on farm auctions. So they were definitely outside of their comfort zone and that also seemed to be the general opinion of the soon to be former owner.
@@J-1410 I think we got more Mercedes in Europe than you got🤷🏼♂️
That's awesome, we will see ya in the next video...
big tractor and technology for agriculture
Do you think the new 1167 MT 2 Track will make an appearance next year? Maybe it pulls better than the 1050 ;)
There is a good chance of that I believe
@@mikemitchell2554 Uuuuhhh i really like that answer
that thing is nearly 700 ponies, as long as it has the traction it should pull mighty fine
@@joshcrd7925 If you can pony it up, then the ponies go up !
If you plan on running that twin track you need to get yourself a 80-100 foot wide drill to make the turning easier with less crop damage
Now that is a sexy tractor
I like the wide angle. It was just as stable.
My fav too. Could ride along all day, but got stuff to do too.
Mike you need some Saskatchewan flags on your equipment. Great show’s thanks for sharing with us.
Something relaxing about watching pro tilling. :-)
Hey Mike. Wide angle is good.
grease cheaper than iron pull pins when you dont have time ah back on things to do list good job mike
Love the wide angle! Your longer fieldwork videos are great, thanks for the ride along. :)
Best part of farming I think I love doing ground work plowing disc all of it
Bro I love your videos your voice is soothing and calm and the videos are kick ass thanks for sharing
At last a tractor with decent width tyres and decent spacing on duals 👍
That’s some crazy farming simulator graphics
You can set the TMS so it runs at whatever minimum revs you want it to. When I’m ploughing I set mine at 1200rpm to avoid that annoying lag during the in’s 👍
I know, that was brought to my attention! 🤦🤣 I guess that's why I am still only a level 1.5 haha
Yeah ice Hockey you guys know how to have Fun☺️👍i wann to See you all playing a Match on That Field👌
Set your min revs to 1500 so your Tms doesn’t drop at the turns. Love the vids, and I love fends
I have heard multiple people say that variable transmissions creat more power loss, so less of the rated engine power makes it to the ground.
That's true. Todays CVTs are very well engineered but still, they have slightly more power loss than a fully conventional transmssion. This is due to the fact, that most tractor variable transmissions have adjustable hydraulic pumps and motors to vary the overall transmission ratio. Hydraulic pumps and motors have more power loss than normal gear wheels. Early CVTs were fully hydraulic which made them pull very bad. Todays variable transmissions are a mix between a conventional, automatic gearbox and hydrostatic gearbox. This makes them pull much better but still not quite as good as a fully conventional gearbox. But they are so much more comfortable and easy to drive. Also, in very hilly regions, they are much safer because the tractor won't roll backwards if you take of uphill.
@@christiansprojects-cgmanuf1426 i worked for a Cat dealer that picked up Agco as well. Your 100% correct about them being a combo. Most are a planetary gear set. With a radial piston pump and motor setup. They are really stout but they do have a high parasitic load compared to something like a poweshift. But infinitely more control
On our little europeen structures the CVT is a good thing for the versality of our tractors. Here in Switzerland I don’t want gears anymore. But I think for those pulling purpose on big fields I wouldn’t choose a CVT. We have to never forgot that multidisc clutches in powershift gearboxes are using a lot of power too
the tracked tractors do have a higher wheigt and a way bigger contact patch. therefore a better traction
But still the price of that fendt. I love the way fendt and challenger are however for that price, atleast 6 or 700 horsepower on a front wheel assist
We run triples on 3 of our 9620r better traction and less compaction and way cheaper than the tracks
@@charlesdoepping5616 look at the weight. the 1050 comes in with 14 tonnes and yours is roughly 20 tonnes according to the deere website. the 1050 isn't heavy enaugh for the big seeder used by mitch imo. fendt should introduce their tyre pressure management system to duels and triple tire configuration. that would be interesting.
@@iBOOM our 9620r are weighted 58,000 we tried tracks and still had slip with our ground and tillage we use, so we found that running triples on three of our 9620r tillage tractor's we've eliminated almost all our slippage and very little compaction.
Weight.
Really like the wide angle
Mike i wach all your guys videos about these up to day mobile Computer robot tractors as i callem. my totall feelings and ideas about them are one thing. they take away the tractors capabilities for good old solid horse power, saying this for a reason i drove a ugly old 825 versatile that if the radio worked you were in heaven, but waching all the tractors you all show i clearly see that low horse powered versatile would kick the asses of those computerised robot tractors you all call a tractor. hook one of them onto a 60 foot Deep Til cultivator and sink it 8 to 10 inches into the ground and see what happens. where we farmed there was hills going up all you seen was blue sky ect and we pulled them up themor down them, needing to use our smarticals wich was the best gears to run with.
Making it black. Ahhhh so satifying!