Alex, i don't know how you do it. i have done this so many times, and every time the pins melt out of the top part of the plastic. You make it look so easy. Great job
I was absolutely waiting for you to say that the ghost puts it back,. and without fail you said exactly that. Thanks for sharing your knowledge in repairing the things you do. Blessings.
So nice to watch your well explained & "better than factory" repairs Alex unfortunately my wife says I'm addicted watching you ha ha love your work very professional no bad language so refreshing. Mick from UK
Unbelievable lost it probably a portal open up in 5 demention took it from you. Northfix from the future wanted to use it got done before you did, gave it back to the past so you can finish the work and video. Thank you for sharing this have a good weekend.
I have a pair of tweezers that I attached to my desk with fishing wire so even if it falls it doesn't reach the ground and get out of shape also so it's doesn't get lost.....well, tweezers disappeared today
The ghost of the HP Spectre is there lol always great seeing a pro doing his craft. Keepnupythe great work loving the channel from way up in the Arctic region of Canada
If only there were more repair guys like you around the world❤️❤️❤️ 3rd party repairs here are lazy in the philippines , usually jumping to conclusion's , for example: like a motherboard not turning on and tells me that i need to replace the board already and didn't bother to check thoroughly like you do in your past UA-cam videos and what's the source of the problem😒 Great job again on the repair ❤️👍👍👍
I've had to change a lot of this. People use to boroke them just triyng to make cable as shorter as they can, forcing the SATA conector. Low melt solder is neccesasy so we don´t want to melt the plastic of the connector. As usually, great job.
Regular leaded solder also helps unsoldering connectors. Probably not as good and quick as with low melt solder, but if you don't have it, it aslo does the trick
Good luck with your repair! Remember that in case of trouble it's better to ask in a forum board (like reddit r/AskElectronics) than to continue. Just not to end up like some of the people who bring hiroshima bomb level repairs to him
People adore you all over the world. You are the best UA-camr that I have seen on UA-cam. As always, good job!
Yes, he is, done & done 👍
He's better than factory
God sent
Always satisfying to see solder shine
Alex, i don't know how you do it. i have done this so many times, and every time the pins melt out of the top part of the plastic. You make it look so easy. Great job
I was absolutely waiting for you to say that the ghost puts it back,. and without fail you said exactly that. Thanks for sharing your knowledge in repairing the things you do. Blessings.
Ive replaced a ton of components on boards and have never ran in to a sata port. You got that bad boy swapped in no time. Great work sir.
So nice to watch your well explained & "better than factory" repairs Alex unfortunately my wife says I'm addicted watching you ha ha love your work very professional no bad language so refreshing.
Mick from UK
Nice work, the magic of low-melt solder. It‘s crazy how good this works.
Nice video, thank you for showing us your work and let us be a part of it.👍👏
Low melt solder gets the life easier, thank you GHOST for returning it, sharing is caring
Unbelievable lost it probably a portal open up in 5 demention took it from you. Northfix from the future wanted to use it got done before you did, gave it back to the past so you can finish the work and video. Thank you for sharing this have a good weekend.
All your videos are amazing and the way you work is amazing. I follow all your videos and learn every day.
And the job is done... BETTER THAN FACTORY...
When you are trying to fix any random device and in the background you listen / watch Alex that is how you gain your knowledge for sure 😄
Everyone: Sharing is caring
Ghost in the shop: Sharing is scaring
Just happened with me too yesterday. I lost a screwdriver bit can't find it 😂
I have a pair of tweezers that I attached to my desk with fishing wire so even if it falls it doesn't reach the ground and get out of shape also so it's doesn't get lost.....well, tweezers disappeared today
I have 5 hammers, I can't find any of them lol
Low Melt Solder is great, thanks for showing 👍
Your videos are like therapy to me.♥️
Your the man. It takes talent to do what you do man. If I ever need anything done I’ll be sending it your way
Looks like an easy fix but it's not, only easy for experienced people!
Great job...
You are simply the best. Thanks for your kindness for sharing to us🤗
The ghost must've been Casper the friendly ghost, returned it in a timely manner. That made me laugh, great job as usual.
Never mind better than factory. In my opinion you are better than anyone doing repairs
The magic of low melt solder, great job.
The ghost of the HP Spectre is there lol always great seeing a pro doing his craft.
Keepnupythe great work loving the channel from way up in the Arctic region of Canada
A ghost stole the solder in the lab, very funny... good job as always!!!
The ghost is in our heads and have the same problem in finding things that is right in front of me LOL. Good job though.
Solid..... And better than factory. Very impressive work.
Great job and that low melt solder is a must have item
If only there were more repair guys like you around the world❤️❤️❤️
3rd party repairs here are lazy in the philippines , usually jumping to conclusion's , for example: like a motherboard not turning on and tells me that i need to replace the board already and didn't bother to check thoroughly like you do in your past UA-cam videos and what's the source of the problem😒
Great job again on the repair ❤️👍👍👍
Nice work Alex yes low melt solder is magic
low melt solder has done an amazing job. very helpfull
The job is done!!!
Better than factory!!!
Solid!!!
The wake is Really very very good 👌
Thank you for sharing your wisdom with us. What a treatured gift!
GREAT WORK YET AGAIN - look out for that Ghost!
Got lot of components by getting this donor board Wishing you best for repairs.
Thank you for your time and effort uploading excellent videos for our education, it has improved my skills tremendous...
that hilarious ghost keep tormenting us all haha! great repair!
Thanks very much mrs alex for sharing your knowledge
Great work 👍 ,low melt solder is really magic.
Thanks Mr Alex for the lecture, leaning alot from your expertise
❤️❤️❤️ low melt solder is best friend for removing components 👍👍👍 better then factory work ❤️❤️❤️
I got one of these repairs to do today. Looking forward for a easy repair.
Great Job, better than factory. Have a nice Weekend
Great job Alex, not even ghosts can stop you from finishing the repair 👻👻
Ghost doesn't make you scare, only will make u be more aware where you put your stuff :) have a wonderful day !
Excellent work, Alejandro!
I've had to change a lot of this. People use to boroke them just triyng to make cable as shorter as they can, forcing the SATA conector. Low melt solder is neccesasy so we don´t want to melt the plastic of the connector. As usually, great job.
Dude youre a magician you kick butt!! That was impressive
I work as an IT Manager...and i will start to use "Better than factory", "short is gone" in my daily job 😄. I was already using "Job is done" 😄
I thoroughly enjoyed it. Thanks for the videos as always.
Best technical man in history.
The ghost just put it back xD I’m done 😂
👏🏽 👏🏽 👏🏽 job well done. Better than factory !
Nice work, also enjoy your humour.
Ghost wanna learn fixing devices 🤣🤣🤣
Thanks for the video... Great job.
I love the positive energy
Hi Alex Your low melt solder is doing good job for you .
It is really nice to watch your videos. Thanks i came across with your channel.
Clean job and magic of low melt solder
I'm using sucker to remove solder and not need to use hot gun. Thank you for the great video
Chief, I am very much new to your channel and I think I saw you first time working on a "Desktop" motherboard !!!! as always great work :) ...
Another video with a quality content. Good job👍
Nice job customer is lucky to get it done
Another great video with magic low melt solder
Nice and shiny joints... Walla better then factory...👍🏼
First time seeing a mining motherboard, Seems very expensive. Great job as always
Another great video, Better than factory👍
Regular leaded solder also helps unsoldering connectors. Probably not as good and quick as with low melt solder, but if you don't have it, it aslo does the trick
"Ghost in the shop ... Sharing is scaring" will be nice on a T-shirt
Lowmelt is just Magic 🤩
Low melt is such a life saver.
The magic of low melt solder
You are one of the best... I'm improving my skills
Too many lessons learned every movie. Tks
such a nice soldering technique
Love it. Greetings from Venezuela.
The Ghost was amazed with low melt solder and tried it out :D
Low melt solder is really awesome
Awesome video man.
Really appreciate your work and content.👍👍
Great work 👍
Very nice job; well done 👏👌👍✔
The ghost punt is really funny.
Greetings from Brazil! 🔥
another great vid!! love to watch n learn!
You need to trap that ghost.
Great work. Better than factory.
low melt and experience is magic 👍
Low melt solder is king of precise repair
I'm going to attempt repair on my device soon looking at your techniques.
Good luck with your repair! Remember that in case of trouble it's better to ask in a forum board (like reddit r/AskElectronics) than to continue.
Just not to end up like some of the people who bring hiroshima bomb level repairs to him
Great Video As always . Thank you.
The magic of you... great sir!
pretty easy job ! we wanna watch some difficult mind blowing repairs
He has hundreds of videos too choose from, Some people like to watch his skill level.
@@poslane99 i watched all of his videos and i just want more hard repairs
The best ever
Very appreciated 🙏
Thanks for your knowledge
excellent video alex very educational
Thumbs up.. awesome work as usual.
...and the job is done.... fantastic
Good job my friend :) Greetings from Poland
Ghost likes Mr. Alex repairs...... Sensei Alex nice video!
Awesome good work 👍
Great job as always!
Your hand work is like magic wand,,,, chooooooo and done (better than factory)
low melt solder Great Discovery