How to Replace Water Pump 2010-2017 Chevrolet Equinox
Вставка
- Опубліковано 15 тра 2022
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ic/ACEWP00037
This video shows you how to install a water pump on your 2010-2017 Chevrolet Equinox. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2010 Chevrolet Equinox
2011 Chevrolet Equinox
2012 Chevrolet Equinox
2013 Chevrolet Equinox
2014 Chevrolet Equinox
2015 Chevrolet Equinox
2016 Chevrolet Equinox
2017 Chevrolet Equinox
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ocM/1AXAA00013
• Pry Bar 1aau.to/oap/1AXAA00020
• 10mm Wrench 1aau.to/oao/1AXAA00010
• 10mm Socket 1aau.to/ob2/1AXAA00017
• 13mm Socket 1aau.to/ocu/1AXAA00015
• 15mm Socket 1aau.to/ocu/1AXAA00015
• 19mm Socket 1aau.to/oaR/1AXAA00043
• 22mm Socket 1aau.to/oz/1AXAA00266
• Exhaust / Muffler Hanger Removal Pliers 1aau.to/oa/1AXAA00151
• O2 Sensor Socket
• Trim Tool Set 1aau.to/oaC/1AXXX00006
• Water Pump Sprocket Holding Tool 1aau.to/oa/1AXAA00140
• Hose Clamp Pliers 1aau.to/ok/1AXAA00076
• 1/2 Inch Ratchet 1aau.to/oaR/1AXAA00043
• 1/4 Inch Ratchet 1aau.to/ob2/1AXAA00017
• 3/4 Inch Drive Ratchet
• 3/8 Inch Drive Ratchet 1aau.to/ocu/1AXAA00015
• Socket Extensions 1aau.to/ocu/1AXAA00015
• Torque Wrench 1aau.to/obp/1AXAA00044
• Brake Parts Cleaner
• Gloves 1aau.to/oy/1AXSS00048
• Safety Glasses 1aau.to/ow/1AXAA00343
• Drain Pan 1aau.to/oL/1AXAA00320
• Pick 1aau.to/o5/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Chevy Equinox 2010-2017 2nd Gen: • Chevy Equinox 2010-201...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This must be General Motors making up for 50 years of the 350 Chevy being so damn easy to work on they’re making up for all the money they lost in the backyard mechanic. Thank you General Motors.
Just wanted to say thank you for this video! We got stranded after a vacation because this dang thing went out. Mechanics couldn’t get to it for a week so me being a novice thought I could do it. Your video is the only reason I succeeded. Thank you for the quality content. Additionally taping putting things back together was a game changer. Sooooo helpful.
That is absolutely insane to replace a water pump!
I stumbled across this just trying to figure out where the water pump even was. I now pray it never fails.. wow. Nice one GM
Great video. It was a big help! Job was anything but fun. Mine was a 2013 and there was a bracket off the back of the block that supported the converter that had to be removed or the converter could not be dropped far enough to get the water pump out. I left the manifold in. Engineers should have to fix cars for a year before they are allowed to design anything! Maintenance was absolutely not taken in account for this task!
Thanks alot bro. After watching your video a million times I finally did it. The only thing I didn't do was remove the exhaust manifold. I just pulled the pipe from the bottom of the car. Thanks
That is a nightmare just to replace the water pump.
More great engineering brought to you by General Motors the home of the
Impossible
Jeesh, I'm surprised you didn't have to remove the rods and pistons in the process. I pray my water pump lasts.
i bought a 10mm deep magnetic socket for this purpose...defenely a piece of mind
Just got done doing this and man you’re awesome! Your instructions made this an extremely easy job! Thank you and keep up the good work.
My GF's just went in her 17 Equinox. $1080 dollars and 4hrs labor to get it done. Unreal. I did her son's Jeep Cherokee and it cost less than $400 and took me 15minutes. Longest part was getting air out of the system.
My wifes 17 is making a whining sound. Was your water pump making a sound or how did you know it was bad? Our sound see.s to be from the pulley side of the engine though. Hopefully its not the water pump
That's about 1/10 of the value of the car
The world's leading car manufacturers are laughing at you all of you and making big money doing if you noticed on the queue to these comment sections it says maybe if you could tell me exactly what you're doing I can understand help you what it really means is tell me what you're doing so I can build it so you can't do it anymore
I was a fan of corvette v8 engines because how easy to work on
This clip is like a Boeshit 797 azzliner
Thank you for the video it's very detailed and interesting to look
I'm here cause of Car Wizard blurb just showed up in FB saying its a grand for a water pump. Has to see for myself
Thank you very much for your knowledge and experience. This is very good video. There’s a couple
So would it be possible when the water pump is replaced that they could do something to the exhaust manifold? we took ours in and when we got it back from a water pump replacement it was really loud and would smell like exhaust when the AC or heat was on while sitting idle. Now they say that the water pump has nothing to do with the manifold, yet it looks as if the manifold is removed to install the pump, and they are wanting to charge us 200 more dollars to fix a problem the vehicle didn't have before the water pump fix.
Great job. Another special tool.
It would be helpful if you were describing what you were doing....mention the part your disassembling instead of "take this off or that off.
Do you need thé special trim tool in order to do this or nah?
So I thibk I have coolant leaking from that drain bolt. I don't see any above that and I cna see it dripping. How is that bolt sealed. Is there a flat gasket or some Teflon tape. How can I reseal properly if it is leaking from there? I don't think it's coming from those weep holes cause it's not leaking near the shaft portion. Thanks.
Great video, I would suggest a thermostat replacement while the housing is out. The way to refill this system is remove the upper hose from the engine side, fill the radiator, then fill the engine at the neck, reconnect the hose. Top off reservoir. Start the engine, warm up. Run at 3k for 30 sec,, then idle for 30, repeat until cooling fans come on. Let return to normal temp, repeat 2 more times. Verify heat in vehicle and level in reservoir. Cool then check level. Per factory instructions.
Was just quoted $1800 by local GM dealer. $600 parts and $175 hr labor. Shop across the street was $1200
note to self never buy an Equinox. This is insane.
I was told to put gasket sealer on the tube o rings, is that wrong?Just use antifreeze to lube them?
your lucky you didnt have california emissions on that. makes the job pure hell
I’m in the midst of getting mine replaced. First 2 guys that did it gave up!! It’s been 3 weeks now trying to fix my stupid car. 😢
What is the point of the tool if the chain on the lower part of the waterpump is attached the the camshaft.....?
So without manifold removal how does that water outlet come out. Top or bottom?
What about the chain go to the pumps if you change the pump and the chains to is the chain needs a timings?
That's what the special tool was for that he bolt on before he took out the water pump. That keeps everything I'm sync while the pump is out. If you don't use the tool you will get an annoying whining sound. The balance shafted chain goes around the water pump
Remember to keep comments respectful and follow our community guidelines means stay in line with this Gestapo or else, we'll have to change the rules somewhere to shut you up
Hello behind the last plate you installed is there antifreeze there
Because my plates is leaking Antifreeze
Perfect #BHPH pawn off for the Sub-Prime credit purchaser! 🥴
At 3100 when he takes that bolt out what does that bolt do? Just above the water
Was this a 4 cylinder or 6 cylinder plz I'm trying to learn how to fix my car on my own plz 🙏
What happens when manifold is seized to converter . I'm stuck
Noticed you guys didn't have the catalytic converter bracket....
What engine size ???
The car may have few engines options
Look different than a 2.4 2016
To change water pump on these cars are a catastrophic Wowww, on my 08 grand marquis ls every thing is easy change, and if I don't have my grand marquis ls right now I will buy another one
He did this job under 2 hrs... why did the shop that quoted me said it'll take 3 days... 🤔
At 22:30 he put in a new seal.can anyone tell me the name of the part or a part number ?
I love that he says "there's another bolt right here" and points to exactly where the camera's blind spot is..
They think the word respect means bow down and kiss it
I'm screwed from the beginning . I don't have a torque wrench .
He didn't say he put a new exhaust manifold when re assemble
Mine needs this repair. Looks like $$$
$1000.00
Welp! Wish me luck! I will have no choice but to do this repair in 30-40 degree weather underneath my car on the street! 😖
Thé shop quoted me $918, if I pay in cash that is. And they told me I would have to leave my car in the shop for the entire day. Uhh.. I use my car for work, so if I did this there goes one day of pay plus labor money. 🤦🏽♂️
They also added in buying a thermostat housing as well. Do I really have to buy the thermostat housing too? This seems to be excessive to me. Looks like I’m up sh-ts creek with this repair.
As a shop owner it is recommended the last thing we want is a stuck thermostat after doing all that work. Might as well do it while it’s apart instead of having to come back in a month to pay extra labor to change it then. It just makes sense to do it while it’s off
Is this a BMW?
Or
A Chevrolet Equinox
You have to do What..............? to change a water pump??????? Have you lost your friecken mind?
Ya know what ...
This is living proof
Someone is wearing his necktie just a little too tight
So tight in fact
The blood supply to his brain is being restricted.
And to make matters even worst. . . .
The team that thought up this clever idea to put a water pump at this location
HAD to have brought their idea to their boss for the final GO AHEAD TEAM, GREAT JOB, ( good grief )
Thank my lucky Stars I do not drive this hot mess.
4.5 hours to change a water pump at a cost of over 1000.00us dollars
Wait a sec,,, , , that is OVER *One Thousand us DOLLARS* Folks
Holly Sheet Batman
A good tip for lining up the sprocket holes when installing the new water pump is to take a picture of your old one and put some reference marks on it as soon as you take it out without disturbing it. use it to compare your new one next to.
Why remove the battery and tray?
OMG I can’t BELIEVE this. I will NEVER buy a Chevy Equinox 😮😮😮
I came here to see if this was a job I could have done myself. Looks like the $687 I paid was well worth it.
My goodness that's just too much. A General Motors Fail!
Lol same here but i dont know if $1000 is worth for me
2010 to 2017 and kept on failing.
NO IT WOULD BE EASIER TO TAKE TIMING COVER OFF
That's the reason why i won't buy equinox ever. It's a terrible, when you need a special tool for replacing just a water pump. And you will need to spent whole your day for it if you do this for the first time. It must be a much simplier! It's a nightmare!
How long did this take to complete ?
They don't tell you all the extra stuff you need when you buy the part, even if you did know it takes over 5 hours,
An hour and a half hour and 40 minutes maybe just to watch the repair video, video,
It's all along the same plot it's a newer vehicle that I was working on for my daughter 2014,
I talked to a car made her car sales person at a dealership last year and he was telling me how the third during the cars to be made so that you won't be able to do most of the work yourself or any at all for that matter you'll have to take it in to be serviced even to check the oil which is already coming out most cars don't have a dipstick can't figure if there's a problem with the dealership that way they make more revenue and they force you into buying a service plan with them otherwise you won't have anyone to work on your car cuz they'll be the only ones to know how high-tech that is and they'll make sure that you don't know how therefore he says, and a very near future , it won't be any more buying a car you can only lease it therefore you have a service plan with it creates more revenue for them and keeps you out of loop of saving any money and forces you into their service plan system that's what's a major corporations are going towards and they're not afraid to admit it or tell you about it either
what a design by GM 😭
Any way to change cam phasers without removing the timing cover
In this day and age the word respectful has lost its meaning
Wait a cotton picking second will ya . . .
Just came to this exciting part
15:48 you have to remove the fricken converter...say whattttttttttttttttt?
At this point I would tow the car back to the dealer and FORCE The to make the free repair
THAT OR
REFUND ME FULL PURCHASE PRICE OF THE CAR
This my dear friends is called a SUCKER SALE
What a lemon, nope back she goes, Buh bye
But why gm
It's not just GM they're all gearing towards the same plan you get a car you're going to need a service plan cuz you won't be able to fix it your self, and this combined with AI in a near future go figure, they'll have complete control
Lost in the translation of the evil rapper degradation of society
I hope people don't buy this car.
Don't buy that car trash.