How Strong is Super Glue?! Fix a Radiator With GORILLA GLUE ?
Вставка
- Опубліковано 25 сер 2024
- Gorilla Glue, with people deciding what the can do with it on their skin, I'd thought id take this time to try it out on some things that will actually be helpful to people out there!
In this video its !!! Gorilla Super Glue VS Car Radiator !!! - Which one do you think will win? Will the radiator crack as soon as I start the engine, or will the Gorilla Super Glue hold though and stop the leak? Well, there's only 2 ways to find out, do it yourself... OR, save yourself time and the headache and just WATCH THIS VIDEO!!
🥼🧪🧤⚗🧠
💥‼️FUN FACT‼️💥
➡️ GORILLA GLUE has a 4,250 PSI (pounds per square inch) bond strength. To put that in perspective for you, the average super glue typically falls into the range of 1,300-1,400 PSI. 👀Which means Gorilla Glue is over TRIPLE the Strength as the "everyday" brand Super Glues‼️
🤯🆙️3️⃣🕞's😳
If You Enjoyed OR Learned ANYTHING New Make Sure You Hit
✅LIKE👍
And Be Sure to
✅SUBSCRIBE
& Check Out The Channel And be Notified For More DIY, How-To Videos, or Anything Else You Might Enjoy!!
💰DO YOU HAVE AN IDEA FOR A VIDEO?🤔
⬇️ Tell Me About lt! ⬇️
↘️ Email Your Request or Idea ↙️
➡️ CoreyCovers_ALL@GMX.com ⬅️
↗️ ↖️
⬆️ ⬆️
-JuJu
Enjoy!
#CoreyJuett #GorillaGlue #WaysToUse
Check out My Other Video!:
How-To Fix or Replace Broken or Burned Cord with a New Plug (Repair any Power Cable)
• Learn How to Solder a ...
Use JB weld on plastic radiators
Do you have to leave it sit and dry for like 24 hours . Cause if your using any of the glue on anything . If you expect it to be ready in 5 min forget it . Shit just falls apart nothing sticks .
I hope it worked for you but for me I would have used JB Weld. People make fun of it but I have successfuly repaired a few things with it.
This is just a way to test a different products strength, not about what everyone else has already tried. The basis of the video was gorilla glues claim of bonding strength, drying length and durability against extreme pressure. I suggest not using anything and just replacing the radiator altogether, but if you're already going to replace one and a sponsor wants you to.. you take the opportunity!
Had a crack in the top of my plastic radiator use some super glue and baking soda been about three months still holding good
Good idea with the baking soda! Do you have a particular Super glue brand that you tend to lean toward as your go-to?
@@CoreyCoversALLorigtsuper glue and baking soda works on everything and hold and bonds instantly 💯
So glue still working on radiator??!
I would like to see a video using the gorilla 2 part epoxy to repair the radiator plastic tank
I would recommend for that project to fix a radiator specially that has heat and chemicals around at all times and out in the elements JB Weld,epoxy type Sealants that Also bond as if it was part of it
This was an experiment, I would never fix a Radiator this way.. I would recommend always replacing your cracked Radiator. This was a test of the adhesive strength for this specific product under pressure.
@@CoreyCoversALL I guess we will see the outcome of the experiment 👍 I am wondering if it will be to stay bond and hand what will come at as time passes on lol
I'm sure it won't. But a good test for the strength of the product. We'll see what happens!! Either way the Radiator is getting replaced 😅
I have a bent radiator tube, will hot glue and this help fix it? Thanks.
Hot glue is probably not a good idea just because it will melt again when the engine gets up to temperature. Is it a rubber tube, like one of the water hoses, or metal line for the transmission fluid?
Hot glue 😂😂😂 you’re funny
So handsome
Poxy glue
I haven't even watched it yet and I'm telling u it's going to break stupid it's for wood
Wood glue is for wood, this isn't Gorilla wood glue, it's Gorilla super glue. You should have watched because it did work! Thanks for "telling me" though.
@@CoreyCoversALL Good retort! Did it hold up?
It did hold up! I was very surprised at how well it worked. I've replaced the radiator now because after fixing that spot, it allowed enough pressure to let a smaller leak (on the other side from the video near the bottom) to show its ugly face! So it told me that the plastic on the sides of the radiator was at the end of its life and I didn't feel it was worth my time continously chasing other cracks. But the spot in this video held perfect and never leaked again (I replaced the radiator about 4 months after the video, so I can say the spot I fixed held up in Texas weather for 4 months with no issues and would have held up for longer had I not decided to go ahead and just replace it) so in conclusion, if you just have one crack or 2 cracks and need to make it a while because of financial issues... this will definitely hold you though, As long as it's applied correctly and allow proper drying time!
Thanks for the view, comment and compliment! Hopefully you've subscribed, I've got some awesome content coming soon, more fun trial and error video's, some cool big projects I'm finishing up, as well as some different product reviews! I look forward to seeing you in the comments in the future!
If you have been paying attention you would know that Gorilla glue can be used for many surfaces and even be used for permanent hair styling.
"Permanent hair styling" 😆 Yep, definitely permanent!!