I have one of these and have never had a bridge like this. Would've been helpful to see you actually do all the adjustments, set the action etc. How much you had to adjust. What you used to loosen/tighten those big screws, which way they turn for looser/tighter etc. lt seems like your aim was to do a general setup video. I only found this because I searched for an Eastwood Univox setup video. There are plenty of general setup videos but none specifically for this guitar
sure. Look at 9:20 in the video. Off to my left on the table you'll see the large slotted screwdriver I use when adjusting such a wraparound bridge. Also, know that loosening is counter-clockwise and will raise string height. Tightening clockwise will lower the strings. In addition, it may help to loosen the strings slightly if you encounter a lot of resistance trying to turn them. and be careful not to let the screwdriver slip and scratch the guitar. Please see this video: ua-cam.com/video/xE14EMLVAKk/v-deo.html where I adjust the height of same type of wraparound bridge on a LP Junior at 3:45. Hope that helps. good luck!
Hope you don"t mind me asking a few questions about the guitar. 1: What is the length of the neck from top to bottom(top of the neck to the slanted bottom part of the neck)? 2: What is the length of the guitar body from top to bottom(from the top of the neck pocket to the bottom of the body)? 3: What is the width of the guitar body? 4: How thick is the guitar body itself? If you do answer my questions then much is appreciated.
What nut size do u think a univox phase 3 nut is ? I just bought one for 600 , not a bad grab, 70s model white- unfortunately the low E nut slot is gone halfway- seller forgot to tell me this - didn’t matter still would’ve bought it lol- I think it’s 1-9/16..
I have one of these and have never had a bridge like this. Would've been helpful to see you actually do all the adjustments, set the action etc. How much you had to adjust. What you used to loosen/tighten those big screws, which way they turn for looser/tighter etc. lt seems like your aim was to do a general setup video. I only found this because I searched for an Eastwood Univox setup video. There are plenty of general setup videos but none specifically for this guitar
sure. Look at 9:20 in the video. Off to my left on the table you'll see the large slotted screwdriver I use when adjusting such a wraparound bridge. Also, know that loosening is counter-clockwise and will raise string height. Tightening clockwise will lower the strings. In addition, it may help to loosen the strings slightly if you encounter a lot of resistance trying to turn them. and be careful not to let the screwdriver slip and scratch the guitar. Please see this video: ua-cam.com/video/xE14EMLVAKk/v-deo.html where I adjust the height of same type of wraparound bridge on a LP Junior at 3:45. Hope that helps. good luck!
Very clear explanations (even for french people :) ... i can setup my univox now.. thanks a lot !
Great, glad to help. thanks!
This is incredibly accurate and helpful, thank you very much!
You're very welcome!
Hope you don"t mind me asking a few questions about the guitar.
1: What is the length of the neck from top to bottom(top of the neck to the slanted bottom part of the neck)?
2: What is the length of the guitar body from top to bottom(from the top of the neck pocket to the bottom of the body)?
3: What is the width of the guitar body?
4: How thick is the guitar body itself?
If you do answer my questions then much is appreciated.
Hey, I'm so sorry I sold this guitar already, but if I get another, I will definitely reply with that info. cheers
@@stillkickinmusicwould love to know too!
What nut size do u think a univox phase 3 nut is ? I just bought one for 600 , not a bad grab, 70s model white- unfortunately the low E nut slot is gone halfway- seller forgot to tell me this - didn’t matter still would’ve bought it lol-
I think it’s 1-9/16..
nice pick up...measure it and try the nearest sized Tusq nut, or make one from a blank if you're adventurous.
Please do more reviews and demos of this
Hey so sorry it sold to someone already. I'll do more videos if I get another one. thanks.