Patience is a virtue, working on old power saws is a blessing. Who wants a new saw with built in obsolescence? Why waste time on consumerism to replace parts that are costly, built-in from the design faults to buy more! Well done Tinman!
Nice to see another old saw being kept alive!! I keep my boiler going with the help of old yellows saws so this was a useful video. Nice attention to details in your work.
Most enjoyable video! You will go as far as you want with your channel. Some people just have what it takes to hold the attention of people looking in. Look forward to the next installment. Thanks for taking the time!
Just gotta comment again. That sound at the end of the video. Straight up old school MAC muscle. Excellent work Tinman! Can’t wait to see it in the wood.
I have ported a sachs dolmar 120 yesterday based on your tutorial. This this thing has all of the simple things done to it that you suggested and it absolutely rips. It is at least 20% stronger and has about the same amount more torque. Thank you for your help making this saw insane.
That highway made me homesick for smother. Sask. had to subscribe. Also got Addicted to saws. Not very common amongst us stubble jumpers but love your vids bro.
It for sure is wipping up much better to my ears I was on the edge of my chair mostly because I was trying to understand this black magic porting stuff now you got my full attention dang I am enjoying this build thanks Tinman 😎
She sounds good. Hope she cuts as good as she sounds. I don’t have any mac’s but would of loved to of got my dad’s old mac’s. Sounds like it colder there than here in Michigan. Be kind be safe and have a day.
That saw is coming along great! I love a good old MAC! Loved DeWalt back in the day. But it’s been Milwaukee for me for the last 12 years. But I still love my black and yellow MACs. Thanks for sharing!
I knew you'd get her! Sounds awesome, you got the ringy dingy now you're going to make us wait to see if she pulls chain(I'm sure it will it's Tinmanized) ! Keep up the great work 👍👍💪💪😁😎!
NICE AND FLAT OUT YOUR WAY ,MY LAND LORD IS FROM SASKATCHEWAN ,AND I WAS BORN IN QUEBEC ALL HILLS ,WHERE I LIVE NOW IS IN BOBCAYGEON ONTARIO IS ALL FARMLAND
Tinman, check out Permitex Aviation sealant. I use it all the time, its a game changer. I've used it when removing base gaskets on my saws. The fuel and oil won't mess with it over time either.
Awesome. So Iv been playing with the 55 pro mac. I had to clean the points I read where they was supposed to b gapped at 19tho I was experimenting I opened them up to 22tho it made a noticeable difference jus figured I'd share with ya .
Bitchin, the sound reminds me of my dads Super Rat, ol 72 100cc Hodaka. Always look forward to wrenchin on the saws on the bench, until you get a parts sent that are suppose to be new and the cylinder winds up having nicks in it 😓. Guess just another reason to rip into a different one until it gets figured out. Always a good time in the tinman shop keep it up great content, thanks. 👍🙏
can you provide info on sourcing parts for old saws so i can actually use your good advice on saw repair to fix my collection of wore out saws that ive saved because everyone told me i needed to buy a new saw because it would cost too much to have them repaired. im now retired and woke up to the fact that if im not going to wear out saws any more i might just as well fix these wore out ones i have and let someone else have a wack at them.
Watch that recoil. A mac is a pain taking apart and cleaning it up. That spring will unwind and it seems 50ft long. Shes sounding good. They are hard on the ears but sound sweet.
NIIIICCE! I love the sound of an old Mac. They sound completely different. Just testing my ear, that first tweak you made on the carb... was that to fatten up the low jet just a skosh?
I own a 455 rancher and was wondering if you have any suggestions on making it more powerful. I have read about porting it, but I do not have the confidence to do it myself and can't find anybody who can do it. So are there any other options? P.S. I ordered a 24' bar and was hoping to run that :).
Good day. I’ve got one too. I keep in mind that it is not a professional grade saw. In my opinion find a 266xp or 272 that needs work and put your money into that.
@@shapeshifter7753 Thats not really an option, because I am only 18 years old and do not have that kind of money laying around. On the dutch husqvarna site it says a max lenght of 22" for a 455 rancher. Does that 1 extra inch matter that much? Nevertheless thanks for your opinion!
Jop Koenes being 18 is a great advantage! You’ve got a lot of time to look around for a great deal on a blown up ol pro saw while you watch Iron Horse and Tinman videos on how to hop em up 🔥 and you’ve got a great stock saw there to use while your having a great time with it all👍
If you feel you really need the extra length put a skip tooth chain on it and keep up on your maintenance. Keep that chain cover assembly and clutch nice n clean and try not to file your rakers down too far. I hope this helps young friend 😎
So the PM70 won't be at the Pebble Beach show? 😂 If you haven't already you might like "Bryan Gray" on UA-cam. He restores old Macs that sometimes need A LOT of work.
Patience is a virtue, working on old power saws is a blessing. Who wants a new saw with built in obsolescence? Why waste time on consumerism to replace parts that are costly, built-in from the design faults to buy more! Well done Tinman!
Nice to see another old saw being kept alive!! I keep my boiler going with the help of old yellows saws so this was a useful video. Nice attention to details in your work.
Most enjoyable video! You will go as far as you want with your channel. Some people just have what it takes to hold the attention of people looking in. Look forward to the next installment. Thanks for taking the time!
Best drive is the drive home to the shop! The work continues but I bet this is the best work!
Just gotta comment again. That sound at the end of the video. Straight up old school MAC muscle. Excellent work Tinman! Can’t wait to see it in the wood.
Another great video sounds like she’s a strong runner now can’t wait to see her in the wood
I have ported a sachs dolmar 120 yesterday based on your tutorial. This this thing has all of the simple things done to it that you suggested and it absolutely rips. It is at least 20% stronger and has about the same amount more torque. Thank you for your help making this saw insane.
Heck yea mcculloch 💪🏻🪓⚡️
Can’t wait for the wood.!!!
Kindness and love
I love building saws, life if getting ready to get busy for me. Love mcculloch saws! Awesome job bud!
Really interesting to watch your talent with these machines. Great video and thanks for posting.
Nicely done on all fronts! Enjoying the videos.
Can not beat that start up..... Job well done, can't wait to see it in the wood 👍
That highway made me homesick for smother. Sask. had to subscribe. Also got Addicted to saws. Not very common amongst us stubble jumpers but love your vids bro.
Thanks for sharing, I have a super pro 80 looks like the same saw basically. So I'm glad I watched you assemble this one, I got a couple pointers
It for sure is wipping up much better to my ears I was on the edge of my chair mostly because I was trying to understand this black magic porting stuff now you got my full attention dang I am enjoying this build thanks Tinman 😎
I like to call it “Tinergized” kind of like you energized it in your own way.
Tinmaaaaan, many pieces make a yellow power saw haha. Always entertaining to watch Friday night in the shop videos. Keep it up TM..
She sounds good. Hope she cuts as good as she sounds. I don’t have any mac’s but would of loved to of got my dad’s old mac’s. Sounds like it colder there than here in Michigan. Be kind be safe and have a day.
Its been -28c to -36 celcius here for a bit. Shes cold out for sure.
I have a super 797 and a couple mini macs! Great video Tinman! Hello fellow Michigander!
Joe Hackett hi Joe
That saw is coming along great! I love a good old MAC! Loved DeWalt back in the day. But it’s been Milwaukee for me for the last 12 years. But I still love my black and yellow MACs. Thanks for sharing!
It's alive! First Mac fires up nice, and sounds good!
The number 2 is the worst during the winter. Great job on the saw.
Brother your a maniac!!!!!! You got a gift!!! Thank you for sharing
Great video again tinman, been striping a few machines down and now started taking photos for the rebuild, must be the age thing kickin
Oh buddy I'm lovin it. Nice work on that ole beauty. Love the Tinmanized. Keep it rollin brother. Thank you so much 🌲❤🌲✊🪓
Great. I'm looking forward to seeing it in wood.
Great job buddy!!! I’m glad to see everything worked out, The saw sounds wicked!! Take care man
Sounds awesome!! Can't wait to see how she cuts!!
Sounds n starts up real nice 👍 can’t wait to see how far you can take this one🔥
Sounds Roudy! Can't wait to see it chew!!
I knew you'd get her! Sounds awesome, you got the ringy dingy now you're going to make us wait to see if she pulls chain(I'm sure it will it's Tinmanized) ! Keep up the great work 👍👍💪💪😁😎!
Ripper! Cant wait to see that thing throw chips!
That jewel is sounding great! No doubt it’s gonna rip!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Sounds great, cannot wait to see it in the wood....
I can’t friggen wait to see that in the wood. I think it’s going to be impressive for a Mac. I heard those rpm’s Tinman!!! 😎😎😎
Ol bryan gray loves thoes old saws. Hes a wild man though lol
the Mcculloch 10-10 service manual 63084 is correct and helpful for super pro saws.
Ah those Mad Macs sound nice eh! 🇨🇦👍
Looking Good' Tinman !! Ken
Wow, that sound is 🔥!!!!!
Three bond. It's the best. I've sealed gas tanks with it. Regular silicone can't do gasoline.
That look like it missing those washers that fold over the bolt underneath the carby stops the intake from coming loss and causing air leak
I rebuilt a super pro 70 great saw
sounds good, hope its cutting good too
NICE AND FLAT OUT YOUR WAY ,MY LAND LORD IS FROM SASKATCHEWAN ,AND I WAS BORN IN QUEBEC ALL HILLS ,WHERE I LIVE NOW IS IN BOBCAYGEON ONTARIO IS ALL FARMLAND
Looks and sounds great, thanks for sharing!
Tinman, check out Permitex Aviation sealant. I use it all the time, its a game changer. I've used it when removing base gaskets on my saws. The fuel and oil won't mess with it over time either.
Great job!
Pure gold!
NICE JOB NOW TESTING TIME IN THE CUT
Awesome. So Iv been playing with the 55 pro mac. I had to clean the points I read where they was supposed to b gapped at 19tho I was experimenting I opened them up to 22tho it made a noticeable difference jus figured I'd share with ya .
A couple thousandths advances the ignition timing considerably. Thanks for sharing.
Looking Good.
Sounds good , nice bldg
Nice one bro
TINMAN, THOUGH YOUR STRUGGLE MAY BE GREAT, YOUR CAUSE IS JUST..:)
Road trip.. ;) ❤️
Nice Chainsaw
Bitchin, the sound reminds me of my dads Super Rat, ol 72 100cc Hodaka. Always look forward to wrenchin on the saws on the bench, until you get a parts sent that are suppose to be new and the cylinder winds up having nicks in it 😓. Guess just another reason to rip into a different one until it gets figured out. Always a good time in the tinman shop keep it up great content, thanks. 👍🙏
I use Opti2 oil also. Best stuff on the market.
Cleanest oil Ive used and it lubes the bearings really well.
Class...tinmansaws☝️👍
can you provide info on sourcing parts for old saws so i can actually use your good advice on saw repair to fix my collection of wore out saws that ive saved because everyone told me i needed to buy a new saw because it would cost too much to have them repaired.
im now retired and woke up to the fact that if im not going to wear out saws any more i might just as well fix these wore out ones i have and let someone else have a wack at them.
LOOKS COMPLICATED TO PUT BACK TOGETHER BUT GREAT JOB FOR BEING PATIENT BUDDY
Yeah they are "different" to assemble.
Wrong spark plug there Tinman, should be a champion DJ7J tapered seat, 5/8hex.
GOTTA STOP ZONING OUT ON THE RNNNNNN NNNN RNNNNN! AT 22:35 COULD'VE SWORN I SAW TWO PEOPLE BEHIND U! WHAT A TRIP!!!!!!!
Would you be willing to port a motorized bicycle cylinder for higher rpms
Watch that recoil. A mac is a pain taking apart and cleaning it up. That spring will unwind and it seems 50ft long. Shes sounding good. They are hard on the ears but sound sweet.
Yeah shes LOUD!! ported XL 76 loud lol.
The recoil was ready to fall apart hehe
NIIIICCE! I love the sound of an old Mac. They sound completely different. Just testing my ear, that first tweak you made on the carb... was that to fatten up the low jet just a skosh?
Yep
You loosing weight?😆. That big yellow saw looks very slimming.
Lol
I own a 455 rancher and was wondering if you have any suggestions on making it more powerful. I have read about porting it, but I do not have the confidence to do it myself and can't find anybody who can do it. So are there any other options?
P.S. I ordered a 24' bar and was hoping to run that :).
Good day. I’ve got one too. I keep in mind that it is not a professional grade saw. In my opinion find a 266xp or 272 that needs work and put your money into that.
Like shape shifter said, I'd just get a bigger saw.
@@shapeshifter7753 Thats not really an option, because I am only 18 years old and do not have that kind of money laying around. On the dutch husqvarna site it says a max lenght of 22" for a 455 rancher. Does that 1 extra inch matter that much? Nevertheless thanks for your opinion!
Jop Koenes being 18 is a great advantage! You’ve got a lot of time to look around for a great deal on a blown up ol pro saw while you watch Iron Horse and Tinman videos on how to hop em up 🔥 and you’ve got a great stock saw there to use while your having a great time with it all👍
If you feel you really need the extra length put a skip tooth chain on it and keep up on your maintenance. Keep that chain cover assembly and clutch nice n clean and try not to file your rakers down too far. I hope this helps young friend 😎
Beauty views!
👍👍
You know what they say when you go yellow. You don't go back. Lol sound good .
Haha, yeah these macs are alright!!
That Mac has been reborn! Sounds really zippy compared to my old 10-10.
Sent an email to you with subject in header. Be safe
So the PM70 won't be at the Pebble Beach show? 😂 If you haven't already you might like "Bryan Gray" on UA-cam. He restores old Macs that sometimes need A LOT of work.
I sub to him
@@tinmanssaws Cool!
nice
Sorry bout yer jets last night😁 go oil!
Lol
TINMAN!
WHITTEMORE
Look like a good place to catch some coyotes and hunting them
👌
👍👍